Install Meet on May 25
 

Established Date: Sunday May 25th
Time: 10 am, arrive whenever you can
Place: Woodbine and 16th Ave Timmies, travel to my place from there


Just wanted to get an idea of whos free next weekend for an install meet. The meet would be held at my place, my driveway or I might try and get a local garage, maybe the one from the prior meet or another for installs. Just would like a yes, no, maybe and what day is good for you guys. Also jot down any parts you might have that need to be installed, simple or large.

1. Prospectjtaz Yes Monday would be best, Can work with Saturday or Sunday.
Parts: MS CAI, Exhaust, Midpipe, Strut Bar

O, also I reside in Markham, ON just to give you guys a heads up. Probably do the install meet at my place and head down to Main Street Markham or Unionville (awesome places) for meal and drinks at the local Frucken.

Yes - nothing to install just wanna hang out don't care which day.

RX8thunder - Yes - Sat, Sun or Monday works

Parts waiting for installation (only some are DIY): MS CAI, exhaust and strut, Mazsport ignition mod and Mid-pipe, BHR clutch and flywheel, Under pulley, spark plugs

i know al you others are reading thism look at the number of views, lets get some more people, if we get 10+, seafoam canisters on me.

Bring back Christmas!

No.
Saturday: will be in Cambridge
Sunday: Spending it with the gf
Monday: Playing beach vball (assuming it doesn't rain)

NO SOUP, i mean SEAFOAM FOR YOU!!!

I'm game.

i m good..

I'm definitely in if it's Monday :D
I've got no parts to install, but if anyone wants to help me clean my MAF sensor.... :D

^^^ Thief ... np I'll do that it takes about 2 minutes or for u my friend 1 beer ;)

Scott I can help you out with all but the Clutch and Flywheel, that stuff is a little more tool intensive.

Do you have a complete set of pulleys or just the crank pulley? When I did mine I had a real bitch of a time with the Alternator pulley. Actually had to take it to a shop to get the nut off.

I have a track day sunday night.....Monday works for me. turbo...you can pick up the mazspot mod then aswell.......I guess I will have to find something else to install on my car though?

another gauge gecko?

Awesome, thanks. To answer your question, I've just ordered the Agency Power Under driven Crank Pulley (Gecko recommendation).

Score! What's it gonna cost for a high beam replacement? :lol:

Turbo8, you going? Give me a shout in MSN.

MS exhaust to install that is all.

Tools required:
jack stands, wheel chocks (big rock will do)
torque wrench
WD40
socket set
industrial sheers or cutters (to cut exhaust tip plastic bumper part)

Weekend of May 24 is good.

what happened to your trip?

My trip is May 15 - 20.

What the heck are you talking about? What are the torque wrench and cutters for? You're going to cut your bumper?

Add a big screw driver in your list to pry at the hanger bushings.

The MS exhaust installation instructions call for 3 different torques on 3 sets of bolts. It also says to trim a 1" section off the inside portion of the exhaust tip bumper plastic.

Instructions inshmuckshions. Torque settings = pretty damn tight with arm strength.

Pop out the plastic bumper pieces as the first thing you do, then uninstall the old one and put in the new one. I didn't have to cut anything with the greddy. Hopefully the MS is the same.

qtwre you are right....there really is no need to cut anything Andrew...and good luck getting a torque wrench under there......as tight as you can get them will do the trick.

I think the MS instructions want us to cut the 1" trim off the piece just in case it gets too hot and the plastic piece is too close, it will start melting the plastic. With the car up on a jack stands, can't I use a torque wrench?

Or perhaps a lift?