RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Australia/New Zealand Forum (https://www.rx8club.com/australia-new-zealand-forum-37/)
-   -   Who Purchased The 1st Greddy Kit In Oz? (https://www.rx8club.com/australia-new-zealand-forum-37/who-purchased-1st-greddy-kit-oz-63197/)

RXE16T 06-03-2005 03:56 AM

Who Purchased The 1st Greddy Kit In Oz?
 
Checked with Advan Performance today, and the first official (sold through Oz distributor) Greddy kit is due to lob any second.

Apparently the order has been payed in full by someone on this forum, residing in Qld, so the question is, who was it?

BTW, the pricing is $4600 supplied only, but Advan can install and tune........ group buy anyone?

Lock & Load 06-03-2005 04:06 AM

Paul

Good detective work ;) i was expecting the delivery of the Greedy kit at my home today but it did not arrive .

The kit which i believe to be the first in Australia was negotiated by myself :p with greedy in japan and Peter Hopkins owner of Advan performance :D

Originally the kit was negotiated for myself but loose lips shink ships when the wife found out all hell broke loose and to have peace i agreed to at least wait till my driving court case procced hopefully succesfully , before i purchased another mod , being the gentlemen that i am i put Dave onto the deal i had negotiated for myself :D

The proud owner is Dave (ciao from this forum ) tHE KIT IS BEING KEPT A SECRET FROM HIS WIFE THATS THE REASON MY NAME AND ADDRESS IS BEING USED :D

By the way $4600.00 is a great price if you can get it as $6200 is the recommended retail price .

cheers
michael

RXE16T 06-03-2005 06:13 AM

I see...... ;)

I've caught the turbo bug again since I've been occassionally flogging around an APS modified MY01 WRX the past week......

Today's phone call was the first step towards becoming 'ONJOOC', the next step though is the biggest unfortunately......... (convincing the missus that I NEED the kit) :(

EZZY 06-03-2005 06:23 AM

cant wait to see/hear the review ;)
ciao you have a PM :)

mikeyr 06-03-2005 06:39 AM

Hmmm...lets get it out of the closet boys. Bring on the review!!!!

Ciao 06-03-2005 07:02 AM

[QUOTE=nojooc]Checked with Advan Performance today, and the first official (sold through Oz distributor) Greddy kit is due to lob any second.

Apparently the order has been payed in full by someone on this forum, residing in Qld, so the question is, who was it?

QUOTE]


Wakey Wakey :D :D

Welcome to three weeks ago!

I will be the happy owner of the kit :D :D

Should be here next week :p :p

Ciao

Dave

Ciao 06-03-2005 07:03 AM

Thanx for the PM Ezzy

takahashi 06-03-2005 09:38 PM

Saw the coverage of the long term use of the Greddy (Trust in Japan) kit on the AT and High power MT car in the RX-7 magazine from Japan.

They remained in a very low boost and did not change anything else :eek:. It work the wonder and get 70ps out of it (at the crank). Tested it is about 50-60ps at the wheel. The prices of the kit actually have drop a lot... Lock and Load :o. It used to be 600000 Yen but now 360000 Yen RRP. So it is about right for your price.

Will love to hear review and protential problem.

Nojooc, if you are interested in HKS you will be thrilled about the HKS supercharger too right?
I have more confident on the HKS tuning with V pro then the E Manage. But then again. I will have the E Manage program myself to tune the engine and certainly it is a bonus.

Lock & Load 06-03-2005 10:23 PM

Taka

360,000.00 Japan Yen = 4,415.05 AUD
Australia Dollars .

We negotiated well :D

cheers
michael

EZZY 06-04-2005 03:08 AM


Originally Posted by Lock & Load
Taka

360,000.00 Japan Yen = 4,415.05 AUD
Australia Dollars .

We negotiated well :D

cheers
michael

$4600 vs. $6200..... there is a big mark up on that :eek:
have a mate working at advan, will "invite" him out for a coffee and see what the deal is :D

Hymee 06-04-2005 05:05 AM

Lock,

I told your wife that you should wait for a no-boost blower ;)

Good job on negotiating the discount Lock. Now everyone gets it :D

Ciao,

Gunna spill the beans on the likely install??? What about the full new 3" zaust?? :p

Cheers,
Hymee.

Lock & Load 06-04-2005 06:54 PM


Originally Posted by Hymee
Lock,

I told your wife that you should wait for a no-boost blower ;)

Good job on negotiating the discount Lock. Now everyone gets it :D

Ciao,

Gunna spill the beans on the likely install??? What about the full new 3" zaust?? :p

Cheers,
Hymee.

After reading the tread on the Hymee superchargers my wife thought it was a save bet to get me to agree and wait for it , knowing she had time on her side and there would be a chance that i may have moved on from the idea ;)

As the designated chauffer / confidante / bodyguard for Dave's turbo project the possibly drive to Brisbane for the install is not very appealling but then again catching up with Dr phil , Les and YOU MAY BE WORTH THE DRIVE :D

cheers
michael

Ciao 06-05-2005 02:56 AM

Turbo Confusion
 
I rang Peter From Advan Performance yesterday, and there seems to be a missunderstanding
The price of the kit was $4900.00 and that was a one off for nojooce to leave his car there so they could do some RnD.
Secondly there is NO talk of a group buy AND the Rec RETail is closer to 7 grand :eek:
They ,as for the moment , are not looking at any discounted prices .
The price I got was due to the fact that there must be a poor guineapig to start the turbo BUG happening :p :p
I will get the kit going on the stock setup, then up the zaust and the BOOST :p

I cant wait :D :D

Ciao

Dave

RXE16T 06-05-2005 05:35 AM


Originally Posted by Ciao
I rang Peter From Advan Performance yesterday, and there seems to be a missunderstanding
The price of the kit was $4900.00 and that was a one off for nojooc to leave his car there so they could do some RnD.
Secondly there is NO talk of a group buy AND the Rec RETail is closer to 7 grand :eek:

Dunno, might have been $4900. :confused: Can't really remember the exact figure.

As for a group buy, I never said Advan had agreed to a special GB price, I was only merely suggesting in my original post that we should all organise a GB.

BTW, good luck with it, guinea pig! :p

Lock & Load 06-05-2005 06:01 AM

Noojoc

Dave may be one off the early adoptees of the Greedy turbo kit here in Australia but dont forget our American forum members have been successfully running and installing the Greedy kit for the last few months with no known engine problems , some of the guys have done 10,000 miles with the kit on and have reported no problems .

I dont consider Dave a guine pig for the Greedy turbo kit but an early test pilot for the Australian cars ;) hopefully one of Australias best rotary tuners will be working on his car and everyone will benefit from the results . :cool:





Superchargers and Turbos dont wreck cars but Drivers with heavy feet and incorrectly tuned forced induction units that are over boosted and pushed to the max for long periods of time .

cheers
michael

RXE16T 06-05-2005 06:08 AM

I wasn't taking a dig by my "guinea pig" comment, merely pointing out that he is infact the first Aussie to undergo a Greddy upgrade....... perhaps I should have used "pioneer" instead? LOL :D

Lock & Load 06-05-2005 06:20 AM


Originally Posted by nojooc
I wasn't taking a dig by my "guinea pig" comment, merely pointing out that he is infact the first Aussie to undergo a Greddy upgrade....... perhaps I should have used "pioneer" instead? LOL :D


Yeah in this politically correct world Pioneer, Test pilot are safer to use and wont land you in hot water :eek: ha ha ha , if you ever get the chance to meet Dave his a great bloke a gentle GIANT but i would not like to piss him off :D

cheers
michael

Ciao 06-05-2005 07:34 AM

LOL :D :D

You guys are cool :cool:

My knowledge with rotaries is extensive ,howewver , tuning this moster ( emanage) is gonna be giving me sterss. :eek:

Hope I wont encounter too many issues

Ciao

Dave

Lock & Load 06-05-2005 04:22 PM

1 Attachment(s)

Originally Posted by Ciao
LOL :D :D

You guys are cool :cool:

My knowledge with rotaries is extensive ,howewver , tuning this moster ( emanage) is gonna be giving me sterss. :eek:

Hope I wont encounter too many issues

Ciao

Dave

Dave

Paying $$$$$$ for the install and tuning will give you the stress ;) , but think of the joy of the driving the beast :cool:

The biggest issue you will encounter is the wrath of your lovely wife when she realises that you have a turbo in your car :D

cheers
michael

Ciao 06-05-2005 06:37 PM

HE HE !!

Oh and Thanx for making it public , Only the entire world knows BUT my wife !!

ELITE-RX8 06-05-2005 10:09 PM

So anyone want to get the kit?

Or people are waitting on Ciao to fit it first?

Hymee 06-05-2005 10:38 PM

It is claimed these turbo's spool up from as little as 2,500 RPM. I guess that would be possible with a small enough turbo. What happens with the breathing over the next 6,500 odd RPM till redline? Did I read somewhere that boost falls off after the mid-range?

I see the new Disco 3's have a "variable geometry" turbo that helps with this, as it can by more efficient over a wide range of RPM. Perhaps the GReddy uses such technology :rolleyes:

Anyway, I'm interested to see how the install goes, along with the before and after dyno runs. Perhaps that is what the others are waiting around for.

BTW, here is a picture of a "not so small" turbo, and its companion wastegate...

http://www.hymee.com/philsskills/Dscn6696.jpg

http://www.hymee.com/philsskills/Dscn6744.jpg

Cheers,
Hymee.

RXP33D 06-06-2005 05:00 AM

Is that a hairdryer connected to a renesis.
I don't think mine came with that.
More info please!
Hehe

xxup 06-06-2005 06:20 AM

That turbo is bigger than the engine!!! What is it off - a D9 catapiller??? :eek:

Zephyr 06-06-2005 08:00 AM


Originally Posted by RXP33D
Is that a hairdryer connected to a renesis.
I don't think mine came with that.
More info please!
Hehe

that is not the renesis i dont think, and it looks like to be on a dyno test of some sort(maybe) :rolleyes:


All times are GMT -5. The time now is 09:51 PM.


© 2024 MH Sub I, LLC dba Internet Brands