Strakes/Chrome Wheels
Thread Starter
Registered User
Joined: Apr 2005
Posts: 745
Likes: 0
From: Canberra
Strakes/Chrome Wheels
Guys,
Have any aussies had experience in ordering fender strakes from the US (through E-Bay or anywhere else)?
The factory strakes look good, but for $550 they seem just a tad pricey!
Also, check out the attached pic from the Mazda Oz website. Chrome (or polished) wheels. I like it! Anyone gone down this path (either chroming or polishing the standard wheels)?
Have any aussies had experience in ordering fender strakes from the US (through E-Bay or anywhere else)?
The factory strakes look good, but for $550 they seem just a tad pricey!
Also, check out the attached pic from the Mazda Oz website. Chrome (or polished) wheels. I like it! Anyone gone down this path (either chroming or polishing the standard wheels)?
Shootin' from the hip
Joined: Apr 2005
Posts: 7,584
Likes: 0
From: Sydney, Australia
With all the damn brake dust that builds up on mine, I'm starting to think a set of charcoal wheels is the way to go!
Agreed re: fender strakes. I ordered the factory ones and just pretended I wasn't really paying $550 for 4 little bits of metal. Still, I think they really finish off the car well.
Agreed re: fender strakes. I ordered the factory ones and just pretended I wasn't really paying $550 for 4 little bits of metal. Still, I think they really finish off the car well.
Shifty Bastard.
Joined: Feb 2004
Posts: 4,835
Likes: 0
From: Melbourne, Australia.
Originally Posted by Tim Tam
Also, check out the attached pic from the Mazda Oz website. Chrome (or polished) wheels. I like it!
Gomez.
New Member
Joined: Mar 2003
Posts: 9,944
Likes: 2
From: Melbourne, Australia
Is it from D Manac 7?
$500 is a rip off!
Talking about finishing touch at the side vent. Why not a Carbon fibre side vent. It is only around $215. Tonym and I got it on our cars https://www.rx8club.com/australia-new-zealand-forum-37/carbon-fibre-side-vents-56146/
$500 is a rip off!
Talking about finishing touch at the side vent. Why not a Carbon fibre side vent. It is only around $215. Tonym and I got it on our cars https://www.rx8club.com/australia-new-zealand-forum-37/carbon-fibre-side-vents-56146/
Registered User
Joined: May 2004
Posts: 147
Likes: 0
From: Melbourne, Australia
Yep D Manac 7. Nah don't think I need a Carbon Fibre side vent. One thing I forgot to do while I was in the UK was check out pricing on the rear fog lamp. That's probably the next exterior part that I want, then maybe the front accent.
Guest
Posts: n/a
Hey Tim
I bought my fender strakes off ebay from somewhere in Britain. They are polished stainless steel or somethin hehe. Perfect fit. It came wit installation instructions, I put them on myself, so It cant be all dat hard if a chick was able to do it....... hehe Yea Mazda sells em very pricey, worked out much cheaper getting em elsewhere. Mazda will charge for time to put them on for you aswell, prob an hours work. It took me about half an hour to put em on, only cuz i spent more time tryin to take the screws off
Since I really had no clue wat I was doin.. first time i actually did somethin to a car!
Regards, Kalli.
I bought my fender strakes off ebay from somewhere in Britain. They are polished stainless steel or somethin hehe. Perfect fit. It came wit installation instructions, I put them on myself, so It cant be all dat hard if a chick was able to do it....... hehe Yea Mazda sells em very pricey, worked out much cheaper getting em elsewhere. Mazda will charge for time to put them on for you aswell, prob an hours work. It took me about half an hour to put em on, only cuz i spent more time tryin to take the screws off
Since I really had no clue wat I was doin.. first time i actually did somethin to a car! Regards, Kalli.
Registered User
Joined: Mar 2005
Posts: 25
Likes: 0
From: Sydney, Australia
Mazda Australia do have a standard "Shadow Chrome" wheel as an option for the RX-8. I have them on mine after seeing them on a Silver 8 at West End Mazda Parramatta.
I'll try to get some pics on here asap.
Cheers,
John
I'll try to get some pics on here asap.
Cheers,
John
Thread Starter
Registered User
Joined: Apr 2005
Posts: 745
Likes: 0
From: Canberra
[QUOTE=MissRx8]
I put them on myself, so It cant be all dat hard if a chick was able to do it....... hehe Yea Mazda sells em very pricey, worked out much cheaper getting em elsewhere. Mazda will charge for time to put them on for you aswell, prob an hours work. It took me about half an hour to put em on, only cuz i spent more time tryin to take the screws off QUOTE]
Missy 8,
How do the doovylackies (strakes) attach? No hole drilling? A bit of Superglue and tape perhaps?
I put them on myself, so It cant be all dat hard if a chick was able to do it....... hehe Yea Mazda sells em very pricey, worked out much cheaper getting em elsewhere. Mazda will charge for time to put them on for you aswell, prob an hours work. It took me about half an hour to put em on, only cuz i spent more time tryin to take the screws off QUOTE]
Missy 8,
How do the doovylackies (strakes) attach? No hole drilling? A bit of Superglue and tape perhaps?
Thread Starter
Registered User
Joined: Apr 2005
Posts: 745
Likes: 0
From: Canberra
Originally Posted by Gomez
.....maybe you'd be interested in the Special Edition RX-8 if this sort of stuff is up your alley? It has wheels with a little more bling.
Shifty Bastard.
Joined: Feb 2004
Posts: 4,835
Likes: 0
From: Melbourne, Australia.
Yes mate, I meant the Shinka (although they didn't call it that here). Shame they're all gone...we were meant to get 110, but I'm not sure that it worked out that way due to the fire at the factory in Japan.
rock-->o<--hard place
Joined: Sep 2003
Posts: 3,242
Likes: 0
From: Canberra, AUSTRALIA
Those Shinkas must have flown out the door (and all been Titanium). There's only supposed to be 150 or so EVO 8's in the country .... and three of them are currently on one of Canberra Mits dealer's floor
i need a new photo
Joined: Jun 2004
Posts: 1,013
Likes: 0
From: Sydney
Originally Posted by Tim Tam
Guys,
Have any aussies had experience in ordering fender strakes from the US (through E-Bay or anywhere else)?
Have any aussies had experience in ordering fender strakes from the US (through E-Bay or anywhere else)?
you might wait a while though, my accents were good .
Originally Posted by Tim Tam
Also, check out the attached pic from the Mazda Oz website. Chrome (or polished) wheels. I like it! Anyone gone down this path (either chroming or polishing the standard wheels)?
https://www.rx8club.com/australia-new-zealand-forum-37/look-what-i-bought-57818/
Welcome on board!!
Mike
Guest
Posts: n/a
Firstly, Gomez...... ha????? bob and michael who? hahaha
Tim, They screw on and also have some self adhesive tape on the sides for extra support. No drilling or anything, very simple. If you interested in the 1s i got off ebay I can have a look and see if they still selling, last time I looked they were still there.
Ta,
Kalli.
Tim, They screw on and also have some self adhesive tape on the sides for extra support. No drilling or anything, very simple. If you interested in the 1s i got off ebay I can have a look and see if they still selling, last time I looked they were still there.
Ta,
Kalli.
New Member
Joined: Mar 2003
Posts: 9,944
Likes: 2
From: Melbourne, Australia
Tim Tam,
Saw the chrome wheel live today at City Melbourne Mazda. It is not bad at all.... not for me but quality wise it is ok. Tell them about a swap, or people here will grab the brand new set of stock rim from you.
Saw the chrome wheel live today at City Melbourne Mazda. It is not bad at all.... not for me but quality wise it is ok. Tell them about a swap, or people here will grab the brand new set of stock rim from you.
Shifty Bastard.
Joined: Feb 2004
Posts: 4,835
Likes: 0
From: Melbourne, Australia.
Originally Posted by MissRx8
Firstly, Gomez...... ha????? bob and michael who? hahaha
.