So what does a 177kW rx-7 put out?
Originally posted by Maestro
Stock 1/4 for a GTS300
With SKaife at the wheel is 13.9 most can only master a mid 14 on a GTS300 (VT)
My FD running a catback and airfilter runs a 13.4 in full road trim.
A GTS300 does not cut a 12 sec 1/4 in road trim.
Stock 1/4 for a GTS300
With SKaife at the wheel is 13.9 most can only master a mid 14 on a GTS300 (VT)
My FD running a catback and airfilter runs a 13.4 in full road trim.
A GTS300 does not cut a 12 sec 1/4 in road trim.
I have witnessed a stock SS (not a 300kW C4B engined GTS) run a 13.99
It is no problem for a GTS to Pull mid - high 13's. Maybe my RX-8 could go a little better, but after 20 runs, the best I did was a 15.0
Just speaking from personal experience. I had 300+ kW out of my unopened SS, could do hi 13's. A proper GTS has a slightly fatter power curve (from the cam), and a lower diff, so it can sprint a bit quicker.
So the "full second" was a realistic figure. I could beat many LS1's off the line to the 60' mark and a bit further, but they all drove right by me after 1/2 track length
Except I couldn't find a dead stock one to race. :P Mine was the ONLY dead stock car there on our private track day. Even the Cooper S was "fully worked over" - whatever that means - hehehe. But I could beat him :DThen there were a couple of Commodore 11 second street cars...
Cheers,
Hymee.
Fair enough :D
The RX-8 down the 1/4 off the line is really impressive I found.
Its only lacking a little top end.
I think if you can get the power up to 206kW + the RX-8 would be very nasty.
I'm looking forward to R-Magic's Turbo kit :D
The RX-8 down the 1/4 off the line is really impressive I found.
Its only lacking a little top end.
I think if you can get the power up to 206kW + the RX-8 would be very nasty.
I'm looking forward to R-Magic's Turbo kit :D
On a twisty track is where the RX-8 shines.
Mazda sent me down to Taupo raceway to drive it around the track and I was throughly impressed !!!!!!!
The car is a handling machine with the DSC on.
Take it off and its a true drivers car with very similar handling charactersics as to the 3rd gen
Then last week I took a guy I race with wife 350Z Track for a drive.
I thought it was a bit of a pig handling wise seemed to wallow around a little and was not flat though the esses like the 8.
The Z has big problem with weight shift IMHO.
Also regaurding the big brembo brake vs. Mazda No names.
If I was Brembo I might put sticker s on Mazda's no name brakes.
Mazda sent me down to Taupo raceway to drive it around the track and I was throughly impressed !!!!!!!
The car is a handling machine with the DSC on.
Take it off and its a true drivers car with very similar handling charactersics as to the 3rd gen
Then last week I took a guy I race with wife 350Z Track for a drive.
I thought it was a bit of a pig handling wise seemed to wallow around a little and was not flat though the esses like the 8.
The Z has big problem with weight shift IMHO.
Also regaurding the big brembo brake vs. Mazda No names.
If I was Brembo I might put sticker s on Mazda's no name brakes.
Meastro - Nice comparo mate. Especially your comments on the handling, and the brakes.
My 60' times were better than most of the 5.7L Holdens that day - so yes - it launches very well. In fact better to 1/3 - 1/2 track distance. But yes it looses out up top. My tuner reckons it would beat a Holden around Qld raceway. I'd love to find out. I know what my quickest time in the SS was - so it's just a matter of getting out there
(I did put slicks on the SS, but I can't see that happening with the '8)
Cheers,
Hymee.
My 60' times were better than most of the 5.7L Holdens that day - so yes - it launches very well. In fact better to 1/3 - 1/2 track distance. But yes it looses out up top. My tuner reckons it would beat a Holden around Qld raceway. I'd love to find out. I know what my quickest time in the SS was - so it's just a matter of getting out there
(I did put slicks on the SS, but I can't see that happening with the '8)Cheers,
Hymee.
Thread
Thread Starter
Forum
Replies
Last Post
jasonrxeight
RX-8's For Sale/Wanted
2
Sep 30, 2015 01:53 PM
Learners_Permit
Series I Interior, Audio, and Electronics
8
Sep 27, 2015 07:38 PM



