Sorry Timbo No more about the exhaust mate..
Originally Posted by RXP33D
Tell me though mate,
what doesn't Michael complain about. Good luck with your turbo! He He.... ROFLMAO Sooo true!!!! Sooo true!!! Ciao Dave |
Originally Posted by Gomez
You manager at Gen(i)e don't know crap from clay. Next time speak to the Tech Manager.......not the Sanitation Manager.
Was it really neccesary to say that??? :confused: Time to clean up the thread guys ...Please I just want to share with all you rotary lovers My awesome experience with this whole install... I mean no disrespect to anyone here all consructive comments have been taken on board ...I moved the POD ....But I aint moving those Georgous Quad pipes Just my taste Thanx again Dave |
Please don't shoot the messenger, but there has been a misquoted statement made on behalf of someone who is no longer about to post on the forum.
In the interest of fairness I will make a short statement that will clarify what Lock & Load actually said about Hymee's exhaust. "I had mentioned that my exhaust happened to be getting louder and there was no mention of hollowness , I am more than happy with my exhaust and dont care what its packed with . " (slight edit by me) Now let's get on with the turbo installation show... :) |
Originally Posted by Ciao
Was it really neccesary to say that??? :confused:
I too have two small children and I am perfectly happy to have them sit in the back of my car over the top of my fume filled plastic gas tank. Why? Because it is perfectly safe, that's why. If you are going to carry on and cast about mistruths regarding the safety of products being sold to the public, be prepared to weather the storm buddy. Gomez. |
I did hope this thread could be kept straight, but hey, it's yours Dave, so you can do whatever.....
Dave, we're all interested in what you are doing, but you need to lose the attitude in how it's expressed...especially the aspersions. The rest of us reading this thread are keen to find out what people can do with FI, and we're following ALL developments. Hymee is a long term contributor to the forum and to developing products that have enhanced the car, at a very good price. There are no safety or quality problems with them at all. He gives advice willingly and timelessly to people that ask the right way. Through that, and the information he has gathered and shared with us over the last couple of years, he has respect -- heaps of it. If you have a private difference of opinion with him I'd suggest you might address that directly with him rather than spraying it here...'cos that won't earn you any respect, and I guess that's what you're doing this for...isn't it? |
Originally Posted by xxup
misquoted statement made on behalf of someone who is no longer about to post on the forum.
no mention of hollowness , :) So this is a witch hunt over a word Hollowness. :) Thats cool ive substantially answered to that comment in the OZ forum https://www.rx8club.com.au/forum/vie...hp?p=7243#7243 Dont shoot me But ive always known about hymees exhaust being fiberglass packed , but never publicly mentioned it ..Remember it was someone else ( sorry Carl ) If we have to talk exhausts start a thread somewhere else remember this is about my turbo install / design Thanx Dave |
Originally Posted by timbo
I did hope this thread could be kept straight, but hey, it's yours Dave, so you can do whatever.....
there you go nuf said lets move on ! Yours pissed offingly dave |
I am so sorry Ciao to drag you into a forum bashing
It was me that stated the fiberglass thing ,not Ciao . :mad: There was not one mention of a side attack from ANYONE!! .Whoever knows what a side attack is anyway .Sounds like a heart condit. Its a safety issue hear not a beat up Hymee issue . Is'nt that what a forum is about ,informing RX8 owners and( all rotary owners) of the risks ? I dont realy care about ciao shmow hymmens shmymens or anybody else ,what's important is the facts !! Let the Dyno Speak for itself , and if its really as good as Ciao reckons ,I am very interested ,and as we all know ,its all gonna come down to the "bang for bux" HOW MUCH $$$$$$$ CIAO??????? Carl |
Originally Posted by Wildcard
Without intending to hijack this thread, can you please educate us on why Rotary engines and fiberglass mufflers dont mix?
|
From what has been said so far in this thread there is apparantly a reputation for fibreglass packed mufflers to catch fire due to the excess of heat in the exhaust.
Some quick research on ausrotary seems to indicate that older RX's with turbos have been running fibreglass mufflers but that the excessive pressure "pulses" from the rotary engine can cause the fibreglass to be pushed out because it just isn't strong enough, so the muffler ends up over time reducing in effectiveness. Let's not forget that there are also a lot of statements being made about rotary engines since the RX-8 came out that only apply to the older rotary engines. The main one I can think of is the Mineral Oil / Synthetic oil. The Renesis Rotary is, according to Mazda, supposed to be able to handle synthetic but because the older rotary engines don't there are statments made that say that you should not use synthetic oil in the RX-8. I don't have the expertise to know whether the RX-8 and Fibreglass Mufflers = bad but I'm sure that Hymee will either know now or will find out by the time his supercharger project is complete due to the amount of testing he will be conducting, and I'd be surprised if his test car didn't have a Hymee Exhaust. :) |
some quotes from:
http://researchnews.osu.edu/archive/fibrmufl.htm "Selamet also said that glass fibre can better withstand the high temperatures produced in modern exhaust systems, and potentially even insulate the car from that heat." "Historically, though, the North American auto industry has been skeptical about using filling in mufflers, and rightly so, Selamet said. Early European designs used basalt wool, which is packed in short fibres. Studies have shown that over time, these short fibres break up and blow out in the exhaust stream. Then the car gets louder, Selamet said." I couldn't find any info that said glass fibre was flammable, only info that house insulation batts are non-flammable, then there is the glassfibre insulation people wrap round their exhaust manifolds and other car insulations made from glass fibre etc. maybe a hot exhaust can melt the glassfibre into marbles and make the exhaust noisy, but a fire is highly unlikely and it would be enclosed in a metal can. conclusion: glass mufflers possibly deteriorate over time but are likely to be safe. unless someone has evidence to the contrary then the exhaust argument is finished and the thread can go back to a discussion of a custom turbo install. |
As an attempt to keep the side issue separate, and leave this thread for Ciao's turbo development effort, please go here:
Glass-Fibre/Wool packed mufflers Cheers, Hymee. |
So..........."ANYWAY"
Did i read somewhere that you getting it dynoed next week Dave? or soon? Sounds exciting!! |
Whoa, who said a long weekend was relaxing. :eek:
Look forward to hearing more about your install Dave and best wishes for a good result. :) |
Wish I could be there at the Nationals and see your creation in the flesh,but from S.A its about a zillion dollars in petrol at $1.40 p/ltr to get there . :eek:
Carl |
Originally Posted by CarlRX8
Wish I could be there at the Nationals and see your creation in the flesh,but from S.A its about a zillion dollars in petrol at $1.40 p/ltr to get there . :eek:
Carl Come on, it's only money. :D :D |
Originally Posted by Revolver
A certain molar drill merchant is going from SA so at least you'd have company! ;)
Come on, it's only money. :D :D I think I deserve something for this commitment LOL :D |
Originally Posted by takahashi
I think I deserve something for this commitment LOL :D
|
Originally Posted by CarlRX8
Wish I could be there at the Nationals and see your creation in the flesh,but from S.A its about a zillion dollars in petrol at $1.40 p/ltr to get there . :eek:
Carl |
Originally Posted by Gibbo
I'll do you a trade, I am in Adelaide fo a conference that weekend, so we'll swap cars at the airport, you take mine to the nationals and I will drive yours around Adelaide. :D
You'll leave town with a posse and the phone numbers of several girls who 'work for a living'. ;) |
Is there anyway, someone can give me the Greddy exhaust manifold, I will buy it off from someone who has an extra one
|
Originally Posted by SickestRx_8ghini
Is there anyway, someone can give me the Greddy exhaust manifold, I will buy it off from someone who has an extra one
Oh wait I will check my garage ....it was in there beside the spare supercharger and turbo kits that I kept lying around. REV " Bling Bling Alert Carl!!! You'll leave town with a posse and the phone numbers of several girls who 'work for a living'. " Oh come on that is a bit harsh....not all of them work, some just give it away ;) |
hehehehe - lucky you. :D
|
hi i hope its ok to hi jack Carls keyboard,its his little sister JAMIN i want to know how manny ponies is the oz kit pushing.has it been on the dyno yet?"ciao",cause my bro want"s to supercharge his Rx8,because turbo's are awsome,but wouldnt most guys want to be BLOWN ??????oh sh*!t carls comming by all
|
Either put a legrope on that sister of yours Carl or...send her to the Nats. ;) :D :D
|
All times are GMT -5. The time now is 04:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands