Cracked Engine Mount (Pics)
 

Hi all. Well I've fallen prey to the dreaded cracked RH engine mount. My '8' is a late 03 model and falls within the VIN range that experiences the problem, but up until late Dec last year the mounts were still ok. (I had them checked at my last service just before going out of warranty).

Anyway I recently had a minor accident where I rear-ended someone and immediately afterwards noticed the familiar symptoms of vibrations at idle, shuddering at the clutch friction point (particularly if the revs drop low) and could even hear a soft/dull thumping when driving over bumps etc.

I pulled the right wheel off last night and took a couple of pics so that you guys could see what a cracked mount looks like should any of you be experiencing the problem and unsure what a damaged mount looks like.

Luckily the insurance company is going to pay to have them repaired along with the front bumper. Lucky as I've just gone out of warranty!

Cheers, NT, I mean SARotor head. (I've moved again!)

I can't see anything today. Having a bad day.

Could you point out where the crack is?

Good that insurance company is picking up the bill

You should call yourself All state and territory RotorHead.... :).

I just see dirt. Where is the crack, exactly?

dont worry about the crack... :Freak_ani
where did you get your avatar? how did you get away with that? :cwm27:

I usually stay away from crack.
Its a secret and its a secret.

Bwahahaha! I was going to ask the same thing.

:offtopic:
Concentrate on topic.... (MM's avatar is very distracting you know:D nice blond).

OK... Jarod can prob circle the area of question.

I think this must be it:

https://www.rx8club.com/attachment.p...id=95196&stc=1

How much did you have to pay for excess??

BTW - if any part of my car got that dirty, I'd cry.

hmmmm... on the photo. Thx MM.

I was thinking that but this sounds like a manufacturing defect rather than from the trauma... (shit I do sound like a doctor).


MM, you are a sad man. I have seen a pic of your car though. very nice

whats new and why are you so upset about.....? :aroused:

if thats the crack, then it looks like it was caused by the impact of the accident....
its good that the insurance is picking it up for you.

I'm still battling to identify that as a crack, even with the arrows.

NT, wanna confirm for us?

BTW, MM do you have your avatar as a jpeg? :mdrmed:

Well I think MY avatar is hot!!!!!!!!!!

Got a thing for cartoon porn have we Kall? :cwm27:

hahahahaha so many things i could say in replyyyyyyyyyy ohh sooooooooo trying to resist from replying!! lol

That is damn cute.
I've been seeing a lot of those "Cars" cartoon versions of different makes around the internet.
I might have to make one for meself.

Rotor Head do you know what the vin range is that experiences the problem with the mount?

2 red one kissing perhaps? :cwm27:

rotorman, I don't think there is a range ... since it has not been a TSB or recall. Someone please proof me wrong!

To my understanding 2005 model are updated. Gomez was talking about an unshield mount of old.... Rotor Head's seems insulated.....? :dunno:

There is a TSB:
Bulletin # 01-021/06
Issued 6/13/06
Hesitation / Idle Vibration Due To Cracked Engine Mount
2004 - 2005 RX-8 Vehicles with VINs lower than JM1FE******154999 (produced before May 6, 2005)

gotta love the "rice car" in 'Cars'

The one with the mods that "make it go faster"

https://us.st11.yimg.com/us.st.yimg....1940_206001832

I experience similar problem! like vibrating at idle, shuddering at the clutch friction point (particularly if the revs drop low.

I've also went to Mazda to look at it..

They said engine mounts are brand new..

hm...what could it be then?? They couldn't find it...so they called local technician to have a look at it..

Local technician is coming in on coming monday and i'm gonna leave car at mazda for a day.

what could it possibly be??

My car was built in July 2005 and it has suffered cracked engine mounts. replaced under warranty and car is smooth and sweet at idle. I think it is a design fault in our cars, and people will probably have problems all the time with them.

Yep MM is spot on with the area of the crack. Normally there would be a smooth curve from the top mount point to where it levels out and becomes horizontal.

I'll post a pic of the left hand side shortly which isn't cracked for comparison.

Drewman, I'm with AAMI and all I had to pay was my $300 excess.

Interestingly I had a call from Allianz today who administer the compulsory 3rd party personal insurance fund for SA and it turns out the other party in the accident has made a claim for medical expenses. The government will pay for that out of the CTP insurance fund, but I have to pay another $300 excess, ontop of what I pay each year with my rego!!!!!! :-O

OK I'm heading out to take a photo. :)

Rotor_man, have a look at the TSB MM mentioned above, the VIN range is contained in the bulletin. http://www.finishlineperformance.com...21-06-1559.pdf