Need help with oil line question
#1
holla if u hear me
Thread Starter
Join Date: Oct 2008
Location: on a softball field somewhere
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Need help with oil line question
please dont bust my azz....i searched.... i looked but cant find a straight answer.....the line that runs off or the oil filler neck, what does it connect to or does it?...the end of kinda looks like its broken and has a scoop looking end....theres a little bit of oil on the top of my engine and not sure where it came from....added sum oil yesterday and my buddy hit my arm and i think i added a litte too much(im gonna get a catch can by the way)...no oil in intake and im gonna clean my MAF too......just want to know where the line goes....thanks.............its an 04 manual
Last edited by pup; 12-13-2009 at 06:35 PM.
#4
holla if u hear me
Thread Starter
Join Date: Oct 2008
Location: on a softball field somewhere
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
chino thanks for the quick response......i dont know if im having a stupid moment or what but i just cant clearly see where the line connects to.....can you tell me please....thanks again man.....i really appreciate it....from my pic can you tell if my line is broken?
#23
holla if u hear me
Thread Starter
Join Date: Oct 2008
Location: on a softball field somewhere
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
it was like that when i got it......what do think has been done and why.....if i leave that tube disconnected it will just blow oil....correct....i wonder if the disconnected line was just capped off before and it blew the cap.......idk
#24
holla if u hear me
Thread Starter
Join Date: Oct 2008
Location: on a softball field somewhere
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
so basically my free hose is supposed to be where the bolt is......ive had my car for 1 year and this has never happened before and i always check my oil at every other fill up
#25
Surf Hard, Drive Hard
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 12 Likes
on
9 Posts
Yeah, someone broke the elbow off and stuck a bolt in there. No real big deal if you are going to run a catch can. then you probably won't be running it back to the intake anyway.
If I were you, I would either get an elbow and re-attach it where it should be.......(but you might not be able to since who ever put the bolt in there might have screwed it up so it won't take the elbow)................or just pull out the remaining plastic piece from that hose and plug up iy up. You could also just remove that entire hose, leave the bolt, and just got get a tight fitting end cap and put it on the oil filler neck.
If/when you get a catch can, that hose will come off and be replaced by another and you will probably just vent the catch can and not bring it back to the intake anyway. See the attached pic.
If I were you, I would either get an elbow and re-attach it where it should be.......(but you might not be able to since who ever put the bolt in there might have screwed it up so it won't take the elbow)................or just pull out the remaining plastic piece from that hose and plug up iy up. You could also just remove that entire hose, leave the bolt, and just got get a tight fitting end cap and put it on the oil filler neck.
If/when you get a catch can, that hose will come off and be replaced by another and you will probably just vent the catch can and not bring it back to the intake anyway. See the attached pic.
Last edited by Mazurfer; 12-13-2009 at 07:58 PM.