Replacing Battery on Keyless Entry Remote
#1
#1 Legend
Thread Starter
iTrader: (1)
Join Date: May 2004
Location: TEXAS
Posts: 3,904
Likes: 0
Received 0 Likes
on
0 Posts
Replacing Battery on Keyless Entry Remote
So, just now i tried getting into the car, and the keyless entry remote did not work. I unlocked the door with the key manually, and try to start the car... but get nothing.
No cranking sound, no chimes, nothing. The interior lights won't even work.
When I try to start it the only thing the car does is flash the red key symbol in the dash. I have a feeling the car is still "ARMED" and hence won't start.
So, I guess i need to change the battery in my keyless entry remote, and then disarm it.
Does anybody know how to open the keyless entry remote?
No cranking sound, no chimes, nothing. The interior lights won't even work.
When I try to start it the only thing the car does is flash the red key symbol in the dash. I have a feeling the car is still "ARMED" and hence won't start.
So, I guess i need to change the battery in my keyless entry remote, and then disarm it.
Does anybody know how to open the keyless entry remote?
Last edited by BigOLundh; 04-20-2006 at 11:55 AM.
#2
#1 Legend
Thread Starter
iTrader: (1)
Join Date: May 2004
Location: TEXAS
Posts: 3,904
Likes: 0
Received 0 Likes
on
0 Posts
Well, i just called the dealership and they said that even if the remote battery died, the car should still turn over manually.
Tow trucks on the way... and im heading back to the dealership again. Thats two times in the past 3 weeks. I hope its not another dead battery.
-hS
Tow trucks on the way... and im heading back to the dealership again. Thats two times in the past 3 weeks. I hope its not another dead battery.
-hS
#3
Registered
Originally Posted by BigOLundh
So, just now i tried getting into the car, and the keyless entry remote did not work. I unlocked the door with the key manually, and try to start the car... but get nothing.
No cranking sound, no chimes, nothing. The interior lights won't even work.
When I try to start it the only thing the car does is flash the red key symbol in the dash. I have a feeling the car is still "ARMED" and hence won't start.
So, I guess i need to change the battery in my keyless entry remote, and then disarm it. Does anybody know how to open the keyless entry remote?
No cranking sound, no chimes, nothing. The interior lights won't even work.
When I try to start it the only thing the car does is flash the red key symbol in the dash. I have a feeling the car is still "ARMED" and hence won't start.
So, I guess i need to change the battery in my keyless entry remote, and then disarm it. Does anybody know how to open the keyless entry remote?
Make sure your car battery is fully charged. Do you have any aftermarket security devices installed on the car? Since the problem affects both the entry remote and the immobilizer system, I would suspect a problem with the PCM or a car power problem. Only way to find out is to get it to a dealer and have them diagnose the problem. You may want to call Mazda Roadside Assistance and have them truck the car to a dealer.
#4
#1 Legend
Thread Starter
iTrader: (1)
Join Date: May 2004
Location: TEXAS
Posts: 3,904
Likes: 0
Received 0 Likes
on
0 Posts
I caleld Mazda Roadside... and they're gonna be here in a few hours. Until then is there anything i can do at home to try and fix this?
I don't have an aftermarket alarm, and the only thing connected to the PCM and Battery is the Interceptor-X.
On my mothers CRV she had a problem with the Key. The dealer said she needs to keep it away from other metal objects as that may interfere with the chip in the key. I'm thinking that might be my problem as well.
I'll report back after i get back from the dealer.
I don't have an aftermarket alarm, and the only thing connected to the PCM and Battery is the Interceptor-X.
On my mothers CRV she had a problem with the Key. The dealer said she needs to keep it away from other metal objects as that may interfere with the chip in the key. I'm thinking that might be my problem as well.
I'll report back after i get back from the dealer.
#5
Registered
Originally Posted by BigOLundh
I caleld Mazda Roadside... and they're gonna be here in a few hours. Until then is there anything i can do at home to try and fix this?
I don't have an aftermarket alarm, and the only thing connected to the PCM and Battery is the Interceptor-X.
On my mothers CRV she had a problem with the Key. The dealer said she needs to keep it away from other metal objects as that may interfere with the chip in the key. I'm thinking that might be my problem as well.
I'll report back after i get back from the dealer.
I don't have an aftermarket alarm, and the only thing connected to the PCM and Battery is the Interceptor-X.
On my mothers CRV she had a problem with the Key. The dealer said she needs to keep it away from other metal objects as that may interfere with the chip in the key. I'm thinking that might be my problem as well.
I'll report back after i get back from the dealer.
#6
#1 Legend
Thread Starter
iTrader: (1)
Join Date: May 2004
Location: TEXAS
Posts: 3,904
Likes: 0
Received 0 Likes
on
0 Posts
The dealer knows about the turbo and interceptor... and has been really good about warranty service in the past.
Well i just got back, and here's the update...
When the roadside guy came, he tried jumping the car but his portable jumper wasn't strong enough. Then he tried with the truck, and that wasn't enough. Then he put the two together and we got it to turn over.
Oh, he also mentioned the car was too low to tow.
At the dealer we checked the battery load. The battery once charged had the normal amount of juice in it. We tested it with the car off... completely seperate from the car, connected to the car, and connected to the car with interceptor... they all had the same readings.
We're thinking i may have left one of the lights on (again). I guess i'll find out if it dies again.
Also at the dealer two people came out while i was leaving and wanted to talk cars. One of the guys said his Mazda 6 was putting 500 whp down with his 100 shot of nos, with a ported motor. He also said his friend who's a mechanic adjusted his gearings for him. I didn't look too close at the car, but it had tons of NOS stickers and the worlds largest aluminum spoiler. I call BS on the 500whp and lower gear ratio.
and thats my update for the last two hours.
Well i just got back, and here's the update...
When the roadside guy came, he tried jumping the car but his portable jumper wasn't strong enough. Then he tried with the truck, and that wasn't enough. Then he put the two together and we got it to turn over.
Oh, he also mentioned the car was too low to tow.
At the dealer we checked the battery load. The battery once charged had the normal amount of juice in it. We tested it with the car off... completely seperate from the car, connected to the car, and connected to the car with interceptor... they all had the same readings.
We're thinking i may have left one of the lights on (again). I guess i'll find out if it dies again.
Also at the dealer two people came out while i was leaving and wanted to talk cars. One of the guys said his Mazda 6 was putting 500 whp down with his 100 shot of nos, with a ported motor. He also said his friend who's a mechanic adjusted his gearings for him. I didn't look too close at the car, but it had tons of NOS stickers and the worlds largest aluminum spoiler. I call BS on the 500whp and lower gear ratio.
and thats my update for the last two hours.
#7
Registered
Make sure your trunk light is not remaining on. Others have had that problem as a drain on the battery. Check it by removing the pass-through between the back seats to see if the light is on. The light or sound signal you get when you use the remote entry will not work if the trunk or the hood is not fully closed.
#8
#1 Legend
Thread Starter
iTrader: (1)
Join Date: May 2004
Location: TEXAS
Posts: 3,904
Likes: 0
Received 0 Likes
on
0 Posts
I just checked and it wasn't the trunk light.
I'll keep looking around and keeping an eye out. I'll also make sure to be extra caution and ensuring the car is completely closed.
One thing i did always leave open is the hood. But i dont think that could be related.
-hS
I'll keep looking around and keeping an eye out. I'll also make sure to be extra caution and ensuring the car is completely closed.
One thing i did always leave open is the hood. But i dont think that could be related.
-hS
#10
#1 Legend
Thread Starter
iTrader: (1)
Join Date: May 2004
Location: TEXAS
Posts: 3,904
Likes: 0
Received 0 Likes
on
0 Posts
yes and yes... didn't help.
the battery was completely dead.
Oh, while at the dealership i found out the batteries on the remote are also covered under warranty. I'll make sure to swing by next week and get mine replaced
One of mine died 6 months ago, and the other one is getting weak.
-hS
the battery was completely dead.
Oh, while at the dealership i found out the batteries on the remote are also covered under warranty. I'll make sure to swing by next week and get mine replaced
One of mine died 6 months ago, and the other one is getting weak.
-hS
#11
I've been everywhere..man
Join Date: Feb 2006
Location: Chicago--River North
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
back to the original question..."how to replace the battery".
if anyone has actually managed to open their remote, please explain:
the owners manual says "push the tab". i assumed that meant "push it down"...but doing that does not release the key. i only managed to chip the tab!
an obviously poor design. could someone offer more detail about how, and in what direction, to push the tab?
thanks,
saxon
if anyone has actually managed to open their remote, please explain:
the owners manual says "push the tab". i assumed that meant "push it down"...but doing that does not release the key. i only managed to chip the tab!
an obviously poor design. could someone offer more detail about how, and in what direction, to push the tab?
thanks,
saxon
#13
Registered User
Join Date: Jul 2004
Location: Houston
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
The battery you need is a CR2025 if 2004 in your model year. Where the metal spring connects your key to the remote you will find a little slot in the remote. Put a standard screw driver in the slot and twist gently to pop open the remote and change the battery. Make sure you put the new battery in the same + direction.
#14
Guest
Posts: n/a
Originally Posted by BigOLundh
On my mothers CRV she had a problem with the Key. The dealer said she needs to keep it away from other metal objects as that may interfere with the chip in the key. I'm thinking that might be my problem as well.
#1 My keys are always jumbled together with other keys and often close to my cell phone (which is a nice generator of various electrical and magnetic emissions).
#2 I work in an electronics lab with dozens of open, unshielded circuit boards and dubious, high-power pieces of electronic test equipment. My keys are typically in my pocket, thus at bench-height and within inches of various bits of equipment all day long.
#3 If the electronic keys were so sensitive as that there would be a lot more dead keys.
I'd say give the Mazda dealer a chance on your car. If they give you a line of crap like that Honda dealer then hold their feet to the fire and insist they trouble-shoot it to a real root-cause.
Thread
Thread Starter
Forum
Replies
Last Post
cschoeps
RX-8's For Sale/Wanted
0
08-06-2015 12:44 PM