Clutch engage sensor fail/broken car won't start
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Location: Valdosta, GA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Clutch engage sensor fail/broken car won't start
Ok so yesterday I went out to start my car and when I turned the key there was no cranking or signs of it trying to crank, so I pumped the clutch a couple times and it then turned over real quick and stopped. Now I couldn't get it to turn over at all, and I got somewhere I need to be...so if this ever happens to you I want to show you how to quick fix it...I searched and searched yesterday to see if this was on here, but with no luck I figure I'll post it.
The black thing dangling is what is supposed to connect to the little white piston, and you can see a little metal jumper on the white piston that clues on how it works....So this is how I fixed it temporarily, and no I didn't have electrical tape at the time.. I know since this car has been out for so long somebody already posted this but I couldn't find it! I just took one of our little 15 fuzes and taped it onto the black sensor, it seemed to fit just right, and now it works great!
The black thing dangling is what is supposed to connect to the little white piston, and you can see a little metal jumper on the white piston that clues on how it works....So this is how I fixed it temporarily, and no I didn't have electrical tape at the time.. I know since this car has been out for so long somebody already posted this but I couldn't find it! I just took one of our little 15 fuzes and taped it onto the black sensor, it seemed to fit just right, and now it works great!
Thread
Thread Starter
Forum
Replies
Last Post