Injector Installation Help
#1
Boosted!!!
Thread Starter
Join Date: Apr 2008
Location: Puerto Rīco
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
Injector Installation Help
So I was looking at the workshop manual for the RX8 to help me with my injector installation and I cant seem to find out where the primary/secondary/primary2 injectors are. I did read about colors and supposedly the primary2 are yellow wich are the ones im switching out but im not sure if thats correct.
Anyone got any help?
Anyone got any help?
#6
Banned
iTrader: (3)
Anyone want to explain to me why I even bother starting threads like this:
https://www.rx8club.com/series-i-tech-garage-22/fuel-injector-info-150432/
let alone have them made into stickies?
https://www.rx8club.com/series-i-tech-garage-22/fuel-injector-info-150432/
let alone have them made into stickies?
#7
Illudium Q-36 Space Moderator
iTrader: (1)
Anyone want to explain to me why I even bother starting threads like this:
https://www.rx8club.com/showthread.php?t=150432
let alone have them made into stickies?
https://www.rx8club.com/showthread.php?t=150432
let alone have them made into stickies?
#8
Registered
iTrader: (1)
Join Date: Sep 2005
Location: Baltimore, MD
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Anyone want to explain to me why I even bother starting threads like this:
https://www.rx8club.com/showthread.php?t=150432
let alone have them made into stickies?
https://www.rx8club.com/showthread.php?t=150432
let alone have them made into stickies?
Because I used it for my install and it was amazingly useful
#21
Boosted!!!
Thread Starter
Join Date: Apr 2008
Location: Puerto Rīco
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
by the way the injectors are already installed, just finishing up on tweaking how the turbocharger sits and ill be ready to go drive it. Ignition is already installed too and the map is also installed and the car has been turned on to check idle etc. So far so good.
#23
Ramon, did you lube the injector o-rings with silicone and did you pressure-test the system before re-installing the UIM?