Painted the calipers today
#1
Painted the calipers today
Well today the wife and I painted the calipers on the Rex. Love the color love how it came out. It's a Metallic Copper. I disassembled the calipers and painted everything individually. I didn't want to go with red cause I don't think that would have looked good at all. I went with this color to compliment the blue and not look too ricer and faddish. Just a good compliment.
In the pictures it's more orange, but in the light it's beautiful.
#4
You gonna eat that?
iTrader: (1)
Fwiw, I did mine when I bought all new rotors with flat black BBQ spray paint as primer, then gloss black caliper spray paint.
Didn't take the calipers apart.
I measured the hubs & cut circles out of the cardboard the rotors came in and laid them over the rotors.
Hung the calipers on the springs with hooks & covered the spindles with the plastic the rotors were wrapped in.
Didn't take the calipers apart.
I measured the hubs & cut circles out of the cardboard the rotors came in and laid them over the rotors.
Hung the calipers on the springs with hooks & covered the spindles with the plastic the rotors were wrapped in.
#5
Registered
iTrader: (1)
Here, just finished up.
These were spares that were sitting around, but I think I'll swap them over soon. We'll see how the paint and decals hold up to track duty. After 5 years the ones currently on the car have gone from the previous owner's single coat of red to shades of brown and black.
Here's the before. They were stripped, hot tanked, blasted and rebuilt.
I didn't realize that the caliper is not symmetrical until I started applying the decals. So you either center on the caliper's dimensions or on the piston "window". We'll see how it is once on the car.
These were spares that were sitting around, but I think I'll swap them over soon. We'll see how the paint and decals hold up to track duty. After 5 years the ones currently on the car have gone from the previous owner's single coat of red to shades of brown and black.
Here's the before. They were stripped, hot tanked, blasted and rebuilt.
I didn't realize that the caliper is not symmetrical until I started applying the decals. So you either center on the caliper's dimensions or on the piston "window". We'll see how it is once on the car.
The following users liked this post:
AmrTSG (12-05-2019)
Thread
Thread Starter
Forum
Replies
Last Post
Racingjunkie
Series I Wheels, Tires, Brakes & Suspension
2
09-29-2015 05:05 PM