Conundrum
02-26-2003, 09:37 PM
I'm considering getting a RX-8 but I have some minor questions about RX-8.
Question 1:
Base on the pictures I have seen so far, the Rim seems to have that "blade" looking. Does it look like that to you too? Anyone has the rim picture for both side of the car?
http://bilder.autobild.de/bilder/1/29591.jpg
Question 2:
Base on these two pictures, the red one has support beam for the hood, but the silver one does not. Any one know if Mazda going to use gas lift or normal support beam for hood?
http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com//pictures/VEHICLE/2003/Mazda/100076288/022252-E.jpg
http://www.movin2fast.com/modules/Magnish/2003%20Canadian%20International%20Auto%20Show/108-0866_IMG.jpg
Thank You.
tribal azn
02-26-2003, 09:44 PM
Originally posted by Conundrum
Question 2:
Base on these two pictures, the red one has support beam for the hood, but the silver one does not. Any one know if Mazda going to use gas lift or normal support beam for hood?
http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com//pictures/VEHICLE/2003/Mazda/100076288/022252-E.jpg
http://www.movin2fast.com/modules/Magnish/2003%20Canadian%20International%20Auto%20Show/108-0866_IMG.jpg
Thank You.
the pics show that both have strut bars
TJRX8
02-26-2003, 10:15 PM
Con asked about the rod that holds the hood up (or hydraulic struts) not strut bar. Or am I missing a post somewhere?
Conundrum
02-27-2003, 12:24 AM
Yeah, I'm wondering what's holding the silver car's hood up. On the red car, I can see there's a bar holding the hood, but not on the silver.
wakeech
02-27-2003, 12:29 AM
if i was a betting man (which i'm not), i'd say just the regular cheapo plane-jane coathanger...
why?? 'cause it's cheap, light, and almost impossible to break... and if it does, it's super cheap to fix.
Elara
02-27-2003, 03:33 PM
do you mean the bar holding the hood up in this picture?
http://www.elysianplains.com/album/mazda/rx8titaniumfront.JPG
zoom44
02-27-2003, 04:07 PM
in the silver pic(which i think is from the Vegas bunch) i would bet soemone is holding the hood up. there is also some speculation that the hood prop might be attached to the hood it self instead of in the engine compartment, which would explain why it isn't seen in that silver pic at all.
zoom44
02-27-2003, 04:11 PM
to end the previous speculation i attached this photo as evidence and await your decision.
ToRX-8orToZ
02-27-2003, 04:35 PM
Ummm, yeahh.... on the silver pic, isnt the bar on the right side?
Elara
02-27-2003, 04:57 PM
The red car has the same clip on the left side too. So either it's for something else, or perhaps they're interchangeable?
rotarynews.com
02-27-2003, 05:49 PM
I have never seen the gas shocks on the hood of any of the 8's i've opened up.
Here's a high res of one in Detroit... and you can see there is nothing but hinges back there.
http://images.rotarynews.com/images/Detroit2003_1/large//mvc01275.jpg
The trunk, on the other hand, does have gas shocks.
The silver one, pictured above, probably had the pole removed to the photograph, or was croped out of the pic.
Conundrum
02-27-2003, 11:04 PM
Cool, Thanks for the replies and pictures.