I want to go to Pep Boy and replace the locking lugnuts with standard ones. Does anyone know what size to get? Also 13/16 socket seems to fit has anyone used that size to remove a wheel?

I have BIG lug-nuts.

21 mm

At least!!!!

And brass of course.

Originally posted by WHealy
21 mm

thanks whealy.... are the lugnut threads standard so any 21mm will fit?

Why don't you just go to the dealer and buy 4 standard lugnuts?

Some people don't want to spend a single dollar at the dealer but then they wander when the next RX-7 is coming out.
That wasn't necessarilly aimed at you flatso.
ps either 13/16 in or 21mm will work.

Originally posted by flatso
I want to go to Pep Boy and replace the locking lugnuts with standard ones.

If I may ask, why are you dumping the locks?

rx8cited

Just buy the same as a '94 RX-7.

Same question, why dump your lockers?
.
.
.
doc

I am dumping them because in the long run they are more trouble then they are worth. The key is too easy to strip if not used correctly or if the wheels are put on too tightly by your local mechanic with the airgun.

Originally posted by CERAMICSEAL
Some people don't want to spend a single dollar at the dealer but then they wander when the next RX-7 is coming out.
That wasn't necessarilly aimed at you flatso.
ps either 13/16 in or 21mm will work.

not sure what you mean exactly but if I can save some money by getting the same lugnuts at Pepboys for 1/4 the price then I would like to do that so I will have the money to buy the next RX-7 when it comes out :). Don't know if you have notice but Mazda accessory prices are fairly expensive.

thanks for the 13/16 information

Originally posted by flatso
I am dumping them because in the long run they are more trouble then they are worth. The key is too easy to strip if not used correctly or if the wheels are put on too tightly by your local mechanic with the airgun.

flatso,

I'd be worried about making it too tempting to have my wheels stolen.

Yeah, I know, if they really want them blah, blah ....... but why make it easier?

Have you considered taking the locks off yourself when taking it in for service that requires them to come off, then put them back on yourself after service?

If you're not expecting the service to require wheels off, just leave the lock on and don't give them the key.

Just my 0.02cents worth :) .

rx8cited

If you ask your dealer nicely, they may be willing to swap your four standard lugnuts for your locknuts. Lord knows they have a bunch of them sitting around because they remove four standard nuts from every car that gets locknuts installed as part of the PDI process.

hmm... dealer placed the 4 original lugnuts in my center console. Yeah, just ask them I'm sure they have plenty. If they balk then point out that they should have given you the originals when you received the vehicle - they were part of the vehicle that you paid for.