wheels feb '03
wheels feb '03
Since a couple of their contributors read this (Hi Bob!) I'll just paraphrase. It was excerts from an interview with the rx-8 Project manager.
1) Mazda will be announcing a 'suprise' in Jan '04.
2) He confirmed existence of a 280HP engine in development for the rx-8
3) 1 & 2 are expected to be linked.
4) The 280HP is expected to be a 13b N/A (10k RPM+)
Sorry best I could do unless one of the wheels guys OK's it.
Sadly some bastard just obliterated my car:
http://members.iinet.net.au/~isedgman/
Which leaves me short of any rx-8 whatsoever since the arent here til june
-pete
1) Mazda will be announcing a 'suprise' in Jan '04.
2) He confirmed existence of a 280HP engine in development for the rx-8
3) 1 & 2 are expected to be linked.
4) The 280HP is expected to be a 13b N/A (10k RPM+)
Sorry best I could do unless one of the wheels guys OK's it.
Sadly some bastard just obliterated my car:
http://members.iinet.net.au/~isedgman/
Which leaves me short of any rx-8 whatsoever since the arent here til june

-pete
They listed the mechaincal mods to the mazdaspeed rx-8 as being exhaust and brakes. No I got the impression it was to be an MPS version. Mazdaspeed prepared, maybe, but not badged as such for export.
-pete
-pete
he just turned in front of me as if he didnt see me
You can see in the last photo that the FMIC and nose are largely intact. The car was so jacked I hit about halfway up the bonnet.
-pete
You can see in the last photo that the FMIC and nose are largely intact. The car was so jacked I hit about halfway up the bonnet.-pete
Re: wheels feb '03
Originally posted by rpm_pwr
Sadly some bastard just obliterated my car:
http://members.iinet.net.au/~isedgman/
Which leaves me short of any rx-8 whatsoever since the arent here til june
Sadly some bastard just obliterated my car:
http://members.iinet.net.au/~isedgman/
Which leaves me short of any rx-8 whatsoever since the arent here til june

Re: wheels feb '03
Originally posted by rpm_pwr
Since a couple of their contributors read this (Hi Bob!) I'll just paraphrase. It was excerts from an interview with the rx-8 Project manager.
1) Mazda will be announcing a 'suprise' in Jan '04.
2) He confirmed existence of a 280HP engine in development for the rx-8
3) 1 & 2 are expected to be linked.
4) The 280HP is expected to be a 13b N/A (10k RPM+)
Sorry best I could do unless one of the wheels guys OK's it.
Sadly some bastard just obliterated my car:
http://members.iinet.net.au/~isedgman/
Which leaves me short of any rx-8 whatsoever since the arent here til june
-pete
Since a couple of their contributors read this (Hi Bob!) I'll just paraphrase. It was excerts from an interview with the rx-8 Project manager.
1) Mazda will be announcing a 'suprise' in Jan '04.
2) He confirmed existence of a 280HP engine in development for the rx-8
3) 1 & 2 are expected to be linked.
4) The 280HP is expected to be a 13b N/A (10k RPM+)
Sorry best I could do unless one of the wheels guys OK's it.
Sadly some bastard just obliterated my car:
http://members.iinet.net.au/~isedgman/
Which leaves me short of any rx-8 whatsoever since the arent here til june

-pete
real sorry to hear about the loss of the mechanical loved one... i die a little every time i see a wrecked FD...
certainly, get a $400 junker as a cheaper-than-a-taxi mode of transportation until you get your nex Rex...
certainly, get a $400 junker as a cheaper-than-a-taxi mode of transportation until you get your nex Rex...
JC Cosmo
JDM only.
3 rotor twin turbo
208kW (really 300HP)
405N.m @ 3500rpm
leather, sat-nav, climate control etc etc
0-100km/h = 6.0s
1/4 mile 14.3s
fuel consumption measured in minutes :D
www.3rotor.com
www.dmrh.com.au
http://www.autospeed.com.au/A_1243/page1.html
-pete
JDM only.
3 rotor twin turbo
208kW (really 300HP)
405N.m @ 3500rpm
leather, sat-nav, climate control etc etc
0-100km/h = 6.0s
1/4 mile 14.3s
fuel consumption measured in minutes :D
www.3rotor.com
www.dmrh.com.au
http://www.autospeed.com.au/A_1243/page1.html
-pete
Last edited by rpm_pwr; Feb 3, 2003 at 11:19 PM.
Re: wheels feb '03
Sadly some bastard just obliterated my car:
http://members.iinet.net.au/~isedgman/
Which leaves me short of any rx-8 whatsoever since the arent here til june
-pete [/B]
http://members.iinet.net.au/~isedgman/
Which leaves me short of any rx-8 whatsoever since the arent here til june

-pete [/B]
Originally posted by sheylen
MPS means mazdapseed. Or if you don't believe me we can ask it Bob Hall.
MPS means mazdapseed. Or if you don't believe me we can ask it Bob Hall.

Mazdaspeed and MPS are two different things, but probably very similar if not the same as per the type of upgrades.
Last edited by P00Man; Apr 16, 2011 at 04:30 PM.
Thread
Thread Starter
Forum
Replies
Last Post
hufflepuff
Series I Wheels, Tires, Brakes & Suspension
6
May 30, 2016 10:45 AM
duworm
Series I Wheels, Tires, Brakes & Suspension
1
Oct 1, 2015 04:57 PM
jasonrxeight
RX-8's For Sale/Wanted
2
Sep 30, 2015 01:53 PM
GranTouTou
Series I Wheels, Tires, Brakes & Suspension
0
Sep 30, 2015 06:11 AM



