I could've sworn I saw a PCM code list posted somewhere on the forum, but I've been searching for an hour to no avail. Was I hallucinating? Can someone direct me to the thread (if there is one)? And if there is one, it NEEDS TO BE A STICKY!!!!

Thanks

Hmm iunno why u need the codes anyways

No list.. You can't pull code from the PCM via the diagnostic loop & CEL like the 2&3rd gen RX-7.

That would be a long list for all of those codes - there are a couple of hundred codes specific just to the RX8, plus the couple of hundred just in general. I know there are some websites out there that will tell you the basic codes like the P0300's, 400's, and so on. I would be impressed if someone took the time to write down all of the codes and posted them though. Your look at I would say at least 500+ codes

The RX-8 is ODB II compliant, so just look up the ODB II codes.

Here is a link to the codes I just found. I saw several on my web search.


http://au.geocities.com/ozbrick850/obd2codes.html#obd-2

Originally posted by legokcen
Here is a link to the codes I just found. I saw several on my web search.


http://au.geocities.com/ozbrick850/obd2codes.html#obd-2

good job

Originally posted by legokcen
Here is a link to the codes I just found. I saw several on my web search.


http://au.geocities.com/ozbrick850/obd2codes.html#obd-2

Thanks - I didn't know there were standard codes. Now if I only knew what causes them :D

he's right though. someone here mentioned in a post in fall or early winter that you could put the car in "diagnostic mode" and get codes by watching a dash light blink or something. wait a moment and i'll search.........

here ya go. it turns out my memory isn't that bad after all, but it's probably not what you thought.

thread from august (http://www.rx8club.com/showthread.php?s=&threadid=9143&highlight=diagnostic)