Hey guys,

Anyone here using these guages? I'm planning on using them with the RB sensors. They website says that all the senders are in 1/8', and only 1" long. Can anyone point me at sender "extensions" and "adapters"? I couldnt find anything on their website. Also if you guys think there would be any problems with the RB sensors and these guages/senders..

http://prosportgauges.com/52mm_digital_series_gauges.aspx

Thanks!

I have prosport gauges, not digital though. And they come with sensors and I would just use those with them. You can get the RB or prosport sensor adaptors (oil plate and water temp sensor housing) to work with them but theres not to much point on running sensors from another make when they come with them.

I may be wrong on some of this but I'm pretty sure youll get best results when you run sensors that were designed for that particular gauge.

Hey guys,

Anyone here using these guages? I'm planning on using them with the RB sensors. They website says that all the senders are in 1/8', and only 1" long. Can anyone point me at sender "extensions" and "adapters"? I couldnt find anything on their website. Also if you guys think there would be any problems with the RB sensors and these guages/senders..

http://prosportgauges.com/52mm_digital_series_gauges.aspx

Thanks!

It is best to just use the Prosport Oil adapter plate, the Racing Beat plate has a 1/8th and a 3/8th adapter threads only.

So if you buy a Prosport Oil Temp and Oil Pressure gauge both of them use 1/8 threads...the racing beat one wont work unless you buy more adapter fittings.

Where as the Prosport plate has 4 adapter fittings.

Let me know if you need to get setup with gauges, I sell the gauges and pods as combos either with the ashtray pod or the center top mount.

I have this exact setup. The gauges come with everything you need. Use the prosport oil adapter. I got my setup from raceroots at a good price.

It is best to just use the Prosport Oil adapter plate, the Racing Beat plate has a 1/8th and a 3/8th adapter threads only.

So if you buy a Prosport Oil Temp and Oil Pressure gauge both of them use 1/8 threads...the racing beat one wont work unless you buy more adapter fittings.

Where as the Prosport plate has 4 adapter fittings.

Let me know if you need to get setup with gauges, I sell the gauges and pods as combos either with the ashtray pod or the center top mount.


I suggest hitting up brice. I bought my lotek gauge setup off of him and am very happy. Got it for a good price and everything that I needed!

I love my ProSport gauges (Oil Pressure, Oil Temp, Water Temp) and I would get them from
RR you can get everything on there Configure Your Own Gauge Combo page.
http://raceroots.com/index.php/products/mazda/rx8/interior/configure-your-own-gauge-combo.html
There is a pic of mine
http://i178.photobucket.com/albums/w242/caraudioking57/RX-8/My%20RX-8/IMG_0032.jpg

^that link makes it cheaper than ebay or any other online vendor as to the best of my knowledge. and as always free t shirt (i think still) and shipping

Yeah they gave me a great quote. Now just save u a bit and i will have my interior lookin fresh ;)

I love my Prosport OP gauge and oil filter adapter plate. Both have worked flawlessly. Also, with the Prosport filter adapter you can still use the 09+ oil filters, with the racing beat you cannot with out cutting the plastic bracket on the fire wall. Plus the Prosport OP gauge goes to 150PSI, which is good if you have the RE-medy Oil Pressure kit.

http://farm3.static.flickr.com/2802/4452631871_c53eb91060.jpg

Hey guys,

Thanks for the replies! I ended up going with the triple gauge pod over at rotaryfx, is that the same one thats at RR? Also, do any of you guys know the sizes of the sensor holes on the Greddy Oil Relocation kit? Will they fit on the Prosport gauges? 1/8'?