Due to the overwhelming interest in getting rid of the factory air box tray.
You know the one that collects all the dirt and rocks under your new shiny Turbo or CAI install. The one that's a pain in the A$$ to clean.

Well here ya go. BHR's new Airbox Undertray replacement.

Satin Black

http://i59.photobucket.com/albums/g307/Easy_E1/BHR%20Airbox/Shortairboxtray022510005.jpg

Polished

http://i59.photobucket.com/albums/g307/Easy_E1/BHR%20Airbox/Shortairboxtray022510001.jpg

Satin Black $125.00 including shipping
Polished $175.00 including shipping

This will be on the BHR website in the next couple of days. But I thought I would give you all a preview here first.

The BHR Airbox Undertray uses the factory mounting rubber grommets/sleeves/bolts/nuts.
I'm looking at adding a mounting kit with new parts to the order if people would like that. Additional charge for the new mounting kit.
If not just use the stock mounting parts from the factory airbox undertray.


A lot of people saw it at the SoCal Dyno Day last weekend. As a matter of fact Jedi has one on his car with a new Piano Black AEM.

these are straight up SEXY! i saw this in person and the quality of the work is SUPERB

Wow, I may have to get an AEM now.

sweetness

That looks like some amazing welding for a sheet metal product.

That looks like some amazing welding for a sheet metal product.

It's not sheet metal. It's 5052 1/8" aluminum. :spank:


:rolleyes:

Nice, aluminum. Great.

OHhhhhhhh snaps was talking about making one this past week.....very nice.

oooh !!!!!

that looks sweet . Do you have a pic of the shiny one installed ?

as usual BHR product are nothing short of amazing..Easy when are you guys going to offer BHR's new direct deposit for paycheck and ill just get the latest BHR products..i might as well and skip the middle man (chase bank)
:lol2:

oooh !!!!!

that looks sweet . Do you have a pic of the shiny one installed ?

Only pic installed is a Satin Black one on Jedis car. I'll see if I can find the pic.

Is there a concession rate if you get the secret squirrel tuba thing with this ? LOL

Easy: glad you threw up a thread for this new offering.
My initial thoughts: Welds are gorgeous, the paint finish is incredible and it's JUST what an intake like the AEM needs. (which I finally switched over to)

I have some pics, not sure how great they are but let me see what I can find.

http://i32.photobucket.com/albums/d37/Jedi54/Dyno%20Day%202010/IMG_1732.jpg

(note I am missing some of the mounting hardware but that will be corrected this weekend thanks to Gr8Bullet)

i held it :squint:

I see Jedi found the pic.

:bigok:

that is puh-reeeeeeetty. will that fit with racing beat intake? prolly not, i'll have to go look

Nice. I'll have to keep this in mind after my warranty expires at the end of the year...get a new AEM intake to boot!

Bah. You guys show me this AFTER you ship my parts? Well POOP.

that is puh-reeeeeeetty. will that fit with racing beat intake? prolly not, i'll have to go look

nope, the RB doesn't use the tray.

When are you going to release the anoucement of your new Burninator kit?

Soooo tempting.

More and more things coming from BHR, wow!

They look very nice! props to BHR again!
So does the polished tray offering have a powder/ceramic clear coat? Is this an option or left up to the buyer?

^will this tray even work with your TOP MOUNT Turbo Kit?? I dont feel like looking up the pictures.

They look very nice! props to BHR again!
So does the polished tray offering have a powder/ceramic clear coat? Is this an option or left up to the buyer?

That would be something the purchaser could do.



^will this tray even work with your TOP MOUNT Turbo Kit?? I dont feel like looking up the pictures.

Didn't have a top mount to try it on. If you want to be the guinea pig. Send me a PM.

SOrry easy But Im not doing Top Mount

So I assume you were talking about 09 Flaker. lol

:yesnod:

^will this tray even work with your TOP MOUNT Turbo Kit?? I dont feel like looking up the pictures.
Yes it would. I wasn't asking for myself.
That would be something the purchaser could do.
:icon_tup:



Sorry Easy, but I'm not doing Top Mount
Pansy! and fixed

So I assume you were talking about 09 Flaker. lol
:suspect:

When are you guys doing the whole air box? Maybe by.... October?

Soooo that's why you got your AEM intake........ o.0
I held it too chase.....:naughty:
no problem Jorge. I didn't need my tray anyways. :)

When are you guys doing the whole air box? Maybe by.... October?

What "whole air box" ?

silly rabbit, an uninsulated metal shield is for kids ....

Did you forget to take your medication this morning Team?

What "whole air box" ?

The tray and the air box...like the whole assembly man.

The tray and the air box...like the whole assembly man.

Something like this ? We have it already. Had it since last year. :suspect:

http://i59.photobucket.com/albums/g307/Easy_E1/BHR%20Airbox/BHRproducts007-1.jpg

Does that replace all of the airbox components? or just the top portion?

I may not be making sense here - there are three plastic pieces to the factory airbox.... I want them all BHR style!

That unit replaces the bottom airbox tray with a complete unit. Bottom and sides. Top is a bolt on to the base component. It's open in the back (Firewall side).

http://i59.photobucket.com/albums/g307/Easy_E1/BHR%20Airbox/BHRAirBox07092009006.jpg

http://i59.photobucket.com/albums/g307/Easy_E1/BHR%20Airbox/BHRAirBox07092009005.jpg

yup - that's what I want.

Thanks E, I didn't realize you had the whole thing done already.

Presents for my R&R!!!

Box of smokes sold separately. :lol2:

Smoke is bad for the health, this box is cool!
Very cool add-on BHR!

@Team: I run without the plastic tray and my intake temps are very close to ambient temp. In my opinion the radiant heat coming from an aluminium box would be minimal and the airflow inside the AEM is fast enough not to get heat soaked even at a traffic light.

silly rabbit, an uninsulated metal shield is for kids ....

We have the data. How about you? lol

We are also holding his ignition system hostage, lest he consume large quantities of the "BHR Cool-Ade". :lol2:

I swear to God, this is getting rediculous. I drew up almost the same thing 3 days ago as I'm getting a new welder tomorrow or wednesday and this is on my list of todo's. Just wasn't sure if I was going to gold foil the bottom or not, guess I don't have to. Building a braile battery tray into mine though.

Looks real good guys, keep it up.

oooh !!!!!

that looks sweet . Do you have a pic of the shiny one installed ?

I just ordered the polished one today. If there isn't a pic by the time I get and install it, I'll post one.

Are you bringing my polished one with you to Vegas??? Need the bottom to match the top..

Are you bringing my polished one with you to Vegas??? Need the bottom to match the top..

You have the large box Phil. This will not work with your current setup. Unless you want to get rid of the large box. And make me mount all the stuff that's in your large box in the little tray. I don't see that happening. :SHOCKED:

http://i59.photobucket.com/albums/g307/Easy_E1/Phils%20Engine%20Rebuild/LasVegas01202010026.jpg

Oh darn.......your right too much stuff to put in a small box. I would sure look nice.

Phil: I think the setup you have now looks great. don't change a thing.

I suppose I could have the lower section of the air box you have polished. Is that something you would consider?

This may be a stupid question but do you have to take apart the AEM CAI to install this new undertray? I bought my car with the AEM CAI already in it so I'm not sure how to exactly uninstall it since I didn't actually install it... :(

looks like you just disconect 2 of the sections you would have plenty of room to put in the tray.

WTB: as EMS mentioned, just unsrew the clips that hold the coupler and it comes apart.
the AEM is one of the easiest intakes to work with.

This may be a stupid question but do you have to take apart the AEM CAI to install this new undertray? I bought my car with the AEM CAI already in it so I'm not sure how to exactly uninstall it since I didn't actually install it... :(


Disconnect the MAF Sensor wire harnes.
Loosen the second hose clamp from the throttle body forward.
Loosen the hose clamp on the flex coupler on the side towards the engine.
Lift up at the throttle body side and lift it out.

http://i59.photobucket.com/albums/g307/Easy_E1/BHR%20Airbox/BHRAirBox07092009009.jpg

Hay easy where did u get the bhr cover for the tray

Ahh I see, makes sense, thanks for the help fella's :)

Hay easy where did u get the bhr cover for the tray

http://blackhaloracing.com/products-page/bhr-products/bhr-intake-shroud3/

Ez,

is there enough room to sneaky pete that zex box underneath the tray?

i should be picking up one of these fairly soon when i order my mazdaspeed CAI. You guys at BHR always put out great products!

Ez,

is there enough room to sneaky pete that zex box underneath the tray?

Underneath? No. On top like in the picture above? Yes.

well im just about to buy an aem cai so looks like this will be what i need to go along with it =]

Crap, I like the no show idea, oh well. I would get the black one anyway, it's only $10 more and purple would clash with my colors :)

Black would look good on the black tray.

Sounded so nice you said it twice....

Sounded so nice you said it twice..... Droid hic up.

Got my polished one in the mail yesterday. Here's some pics of it installed.

lookin' good.

Thanks. I just remembered that I forgot to put some heat shielding material underneath it. I guess I'll be taking it back out to do that.

Looking good!

I got a box from BHR in the mail today !!! Next step for me is a visit to le little turbo shop

no one told me it was on sale.. i hate you guys.


emailed erik for price on flat black..

no one told me it was on sale.. i hate you guys.


emailed Erick for price on flat black..

Orly. Like it hasn't been available for a couple months. Since SoCal Dyno Day.

:banghead:

Orly. Like it hasn't been available for a couple months. Since SoCal Dyno Day.

:banghead:

The product page is here (http://blackhaloracing.com/products-page/bhr-products/bhr-airbox-tray-replacement/).

Laythor: you n00blet, hurry up and get one installed.

Orly. Like it hasn't been available for a couple months. Since SoCal Dyno Day.

:banghead:

i'm not one of the cool kids who got one on the day of the Dyno.. so stfu!:mad:

i'm not one of the cool kids who got one on the day of the Dyno.. so stfu!:mad:

But your one of the cool kids that get one now. :icon_tup:

But your one of the cool kids that get one now. :icon_tup:

if you ever reply to my email :-)

Can I have the specs on the whole size? Im wondering if my intake piping for the turbo will allow for this mod i dont see why not but just wwant to be sure.

Can I have the specs on the whole size? Im wondering if my intake piping for the turbo will allow for this mod i dont see why not but just wwant to be sure.

Do you have the stock tray in the car now? If you do then this will fit with your system. It's the same basic dimensions as the stock air box under tray.

if you ever reply to my email :-)

So now I have to go to our website. Look up the price and email you back with that info. Hmmmm.

i dont want to polished on, i want flat black... so YOUR website told me to email you. Noob

i dont want to polished on, i want flat black... so YOUR website told me to email you. Noob

$125.00 shipped


But for you,,, $125.00 shipped

Noobette.

Payment sent.. now hurry the f-up!

laythor: your hot pink intake tray is gonna look awesome!

Easy my stock tray is absent............hmmm but i do have it ill take apart the pipes and see if it fits.

laythor: your hot pink intake tray is gonna look awesome!

it'll match the hot pink on the outside of my car. i update my "yay i got hit" thread

Payment sent.. now hurry the f-up!

3 weeks. :wiggle:

laythor: your hot pink intake tray is gonna look awesome!

Jedi! It was going to be a surprise. Now you spoiled it.

Easy my stock tray is absent............hmmm but i do have it ill take apart the pipes and see if it fits.

Sounds like a good idea. Let me know.

I like it!

mad PS skillz Erik... mad skillz

mad PS skillz Erick... mad skillz

Thanks Mat. :eek:

Is that Ray with a shit eatin' grin in the background?

Is that Ray with a shit eatin' grin in the background?

Yep. Was wondering if anybody was going to notice that. And also his RX8 and my RX7.

So does anybody have pics of these installed? Would be nice to see how they look in everybody's cars.

http://i43.photobucket.com/albums/e364/mdobilas/Battery/21478d1a.jpg

BHR undertray and battery relocation... there sure is a lot of room in that engine bay now

Lookin' good!

http://i43.photobucket.com/albums/e364/mdobilas/Battery/21478d1a.jpg

BHR undertray and battery relocation... there sure is a lot of room in that engine bay now

If we knew you were going to relocate your battery..........:spank:

Now that you have all that room, you should install a hibachi grill in there for burgers and stuff.

Had to trim the bottom of mine a smidge with an air saw due to custom piping. It looks 1000 times better than the alternatives. Thanks BHR!

http://www.rx8club.com/attachment.php?attachmentid=160690&stc=1&d=1281584514

http://www.rx8club.com/attachment.php?attachmentid=160691&stc=1&d=1281584514

http://www.rx8club.com/attachment.php?attachmentid=160689&stc=1&d=1281584514

^^^ Badass, im gonna have to get one of these puppies soon... damn you BHR, making me break the bank lol

@Shelldude

Thats looks really good, well concealed and not too flashy.

Looking good shelldude! I suppose we could make future models just a little shorter on the back end to fit a little better on custom apps.

That is BAMF . Just using the new word I learnt off a recent thread .

I think it was in the movie "Sudden Impact" that Clint Eastwood brought us the acronym "JAMF", which is similar. :dunno:

jive ass motherfucker?

have not heard that in ages...

Yep, but the complete phrase was not uttered in the movie.

but they were just a bunch of mfcs

Looking good shelldude! I suppose we could make future models just a little shorter on the back end to fit a little better on custom apps.

I think I unintentionally mislead you. The end of the liner is fine. It was the underside of the hole/cutout for the intake that we had to ream a bit. We enlarged the underside of the cutout maybe 1/2" to accommodate my intake setup.

I think I unintentionally mislead you. The end of the liner is fine. It was the underside of the hole/cutout for the intake that we had to ream a bit. We enlarged the underside of the cutout maybe 1/2" to accommodate my intake setup.

Apparently, John Holmes did your intake for you. :lol2:

it was really tight... had a helluva time getting the clamps back around it so we said screw it and grabbed the saw.... reamed her good.

it was really tight... had a helluva time getting the clamps back around it so we said screw it and grabbed the saw.... reamed her good.

"Yeah? Was that the one called "Logjammin', Jackie?"
The Dude from "The Big Lebowski"