spence15
12-25-2009, 11:11 AM
**UPDATED**
I have a 2006 WWP Mazdaspeed kit with complete 5% tint and black OEM rims, and black eyelids...but I always wanted to paint the top half of the car black. :dunno:
NEW CHANGE, I will no longer do this look for 2 reasons:
1st: Money restraints if I wanted it done right and properly clearcoated etc I would have needed like 3500
2nd: I dont have 3500 and if I did I certainly wouldnt spend it on 2 tone paint jobs.
HERE *WAS* THE LOOK I WANTED:
http://i702.photobucket.com/albums/ww21/spence15_RX8/2tone.jpg
Here is where I stand (CRAPPY CAMERA), minus my eyelids:
http://i702.photobucket.com/albums/ww21/spence15_RX8/P6200058.jpg
What I'm doing now is
#1) trunk debadge, completed with a new coat of black paint (debating keeping spoiler OEM WHITE? or PAINT IT BLACK, OR REMOVE IT) (OPINIONS?)
#2) Roof paint, inside of roof lining, I avoided doing the pillars and the remainder of roof because of insufficient funds and the increased complexity. + many think this will look better the revised way
#3) The hood will see a complete coat of black
#4) the Bumper will also see black, inside the headlights and down just to the reinforcement bar cover.
I will be completing this project around the 14th of January at Phoenix Custom Autobody. http://www.phoenixcustom.ca/
Pictures will follow!
I have a 2006 WWP Mazdaspeed kit with complete 5% tint and black OEM rims, and black eyelids...but I always wanted to paint the top half of the car black. :dunno:
NEW CHANGE, I will no longer do this look for 2 reasons:
1st: Money restraints if I wanted it done right and properly clearcoated etc I would have needed like 3500
2nd: I dont have 3500 and if I did I certainly wouldnt spend it on 2 tone paint jobs.
HERE *WAS* THE LOOK I WANTED:
http://i702.photobucket.com/albums/ww21/spence15_RX8/2tone.jpg
Here is where I stand (CRAPPY CAMERA), minus my eyelids:
http://i702.photobucket.com/albums/ww21/spence15_RX8/P6200058.jpg
What I'm doing now is
#1) trunk debadge, completed with a new coat of black paint (debating keeping spoiler OEM WHITE? or PAINT IT BLACK, OR REMOVE IT) (OPINIONS?)
#2) Roof paint, inside of roof lining, I avoided doing the pillars and the remainder of roof because of insufficient funds and the increased complexity. + many think this will look better the revised way
#3) The hood will see a complete coat of black
#4) the Bumper will also see black, inside the headlights and down just to the reinforcement bar cover.
I will be completing this project around the 14th of January at Phoenix Custom Autobody. http://www.phoenixcustom.ca/
Pictures will follow!