https://thmotorsports.rpmware.com/Client/493c6f3e-e979-4c53-a24c-b17ecfb328bc/thmotorsports-leaderboard.gif (thmotorsports.com)

Finally ready to go!!! The THMotorsports FULL Stainless Steel RX8 Resonated Midpipes.


http://i87.photobucket.com/albums/k133/mx5adam/midpipe5.jpg

http://i87.photobucket.com/albums/k133/mx5adam/midpipe9.jpg

http://i87.photobucket.com/albums/k133/mx5adam/midpipe11.jpg

http://i87.photobucket.com/albums/k133/mx5adam/midpipe10.jpg

http://i87.photobucket.com/albums/k133/mx5adam/midpipe1.jpg

http://i87.photobucket.com/albums/k133/mx5adam/midpipe13.jpg

http://i87.photobucket.com/albums/k133/mx5adam/midpipe6.jpg

http://i87.photobucket.com/albums/k133/mx5adam/midpipe8.jpg

http://i87.photobucket.com/albums/k133/mx5adam/midpipe14.jpg

http://i87.photobucket.com/albums/k133/mx5adam/midpipe15.jpg



YOUTUBE VIDEOS::ylsuper:


Stock RX8 with stock midpipe and Greddy SP2 Cat back.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/55pCWVGP3cU&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/55pCWVGP3cU&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>




Same Stock RX8 but now with our THMotorsports resonated midpipe and Greddy SP2 Cat back.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/-n4JZGo6byE&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/-n4JZGo6byE&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>




VIBRANT 18 INCH Stainless Steel Resonator


CLICK HERE FOR INFO ON THIS VIBRANT RESONATOR (http://vibrantperformance.com/catalog/product_info.php?cPath=1021_1033_1054&products_id=293)


Vibrant Part number 1795

Inlet Diameter: 3"
Outlet Diameter: 3"
Resonator Size: 4" Round Body, 15.5" Long
Overall Length: 18"

WEIGHT: 12lbs


OEM FLANGES (perfect fit)

Stock under braces fit without any issues

Welded bung for the O2 sensor or a aftermarket Wideband O2

ONLY 6 ARE AVAILABLE FOR THE FIRST RUN!!!

PM OR CALL US FOR FULL PRICING OR COMBO DEALS WITH ANYTHING ELSE

THESE ARE IN STOCK AND READY FOR PICKUP OR SHIPPED!!!


For those who are unfamiliar with our company CLICK HERE!!! and check us out!!! (http://www.thmotorsports.com/our-store-and-gallery)



To order Call us at 800-959-0145 ex3 or PM us with your email address so that we can send you a checkout request via Google Checkout or Paypal. We also accept any credit card.

Looking forward in hearing from you guys!!


Adam
WWW.THMOTORSPORTS.COM

Bump for a great company. Saw the midpipe last weekend and I can tell you that it is a very high quality piece. All the welds were flawless. The sound was great too.

If your interested, I have seen these midpipes and the build quality is excellent.

Congradulations on becoming a vendor Adam.

where are the hangers for the midpipe?

^ditto

pm'ed

you don't really need a hanger..it won't fall off

you don't really need a hanger..it won't fall off

correct it wont fall off.

but have you ever run a mid pipe with out a hanger? if so you would know why you want one.

beers :beer:

i'm running my midpipe now without a hanger..perfectly fine

I might check these out, could you PM me a price shipped to 40513?

any chance you could get video clips with HKS HI-POWER?

i'm running my midpipe now without a hanger..perfectly fine

yep,

give it time.


beers :beer:

I run mine without a hanger and it's getting annoying. When you go over big bumps on the highway, it knocks. I had to put spacers under my stock brace to get it to stop bumping on every bump, but it still does on the big ones.

Bump for a great company. Saw the midpipe last weekend and I can tell you that it is a very high quality piece. All the welds were flawless. The sound was great too.

If your interested, I have seen these midpipes and the build quality is excellent.

Congradulations on becoming a vendor Adam.



thank you guys!!!



where are the hangers for the midpipe?

the midpipe is much lighter than the stocker...we did not see a need for one since i have mine on for almost 3 years now without these. And I had an Rx7store one too without any banging or clearance issues....but the welds fell apart and the metal quality was poor.

I run mine without a hanger and it's getting annoying. When you go over big bumps on the highway, it knocks. I had to put spacers under my stock brace to get it to stop bumping on every bump, but it still does on the big ones.


I can get hangers welded on for those who would want that :yesnod: :biggthump:




Thank you guys!!!



and yes....:40oz:....indeed!!! It is Friday!!!





Adam
THM

Thank you guys...PM's responded to!!!


Dyno results coming soon!!!



Adam

Price shipped to 53045 please.

Thanks!

Great to see more variety.

shipped to 27604. thanks!

my rp supercat doesn't have a hanger and it's just fine.. i don't see what the big deal is.

Those look really high quality! i'll spread the word to the locals here

any chance you could get video clips with HKS HI-POWER?

Very interested would also like to hear a clip with the Hks hi power also before further looking into it

those are some beautiful welds

Price shipped to 53045 please.

Thanks!

PM sent!!!

Great to see more variety.

Thank you....I agree!!!

shipped to 27604. thanks!

PM sent too!!!

my rp supercat doesn't have a hanger and it's just fine.. i don't see what the big deal is.

Those look really high quality! i'll spread the word to the locals here


Thank you sir!!!


Very interested would also like to hear a clip with the Hks hi power also before further looking into it

you have PM...if anyone in the Chicago area has an HKS Hi power on their 8 please contact me and I can get that going with some sound clips/videos.

those are some beautiful welds

Indeed they are...lots of work went into them.



Adam
THM

Great pipe and a great guy. Def. pick these up from THmotorsports! I saw it the other week and maaan it is a very nice pipe. unfortunately i already have the mazsport one. Im even contemplating on getting this one. the mazsport one is bulky.

Curious on price shipped to 45230. PM sent

Great pipe and a great guy. Def. pick these up from THmotorsports! I saw it the other week and maaan it is a very nice pipe. unfortunately i already have the mazsport one. Im even contemplating on getting this one. the mazsport one is bulky.

Thank you...glad you liked it :yumyum:

Curious on price shipped to 45230. PM sent

Pricing sent!!!




Adam
THM

Bump for THMotorSports!!!!

Great group of guys here! I've known Adam for a little over a year now,(met on the freeway while he flew by me in his rx8 with a 3 foot flame shooting out the tailpipe!) and both he and Eddie have always taken good care of me.

Heck Adam got me into Autocross and showed me a thing or two :P.

For any with fitment questions, that's my rx8 in the video's above. Fitment is awesome! slides in like butter. My RX8 gets the beating of the Chicago streets and I have no issues with
banging or any noise coming from the midpipe, and my pipe has no hanger.

If any are in or close to the chicago area and you wanna see/hear and come for a ride, I'd be more then happy to take ya for a spin.

Bump for THMotorSports!!!!

Great group of guys here! I've known Adam for a little over a year now,(met on the freeway while he flew by me in his rx8 with a 3 foot flame shooting out the tailpipe!) and both he and Eddie have always taken good care of me.

Heck Adam got me into Autocross and showed me a thing or two :P.

For any with fitment questions, that's my rx8 in the video's above. Fitment is awesome! slides in like butter. My RX8 gets the beating of the Chicago streets and I have no issues with
banging or any noise coming from the midpipe, and my pipe has no hanger.

If any are in or close to the chicago area and you wanna see/hear and come for a ride, I'd be more then happy to take ya for a spin.

How are those dyno results coming....we are eager to see!!!



Adam
THM

yeah I was wondering about that too :)

Anyway what about shipment to J4x1x6?

yeah I was wondering about that too :)

Anyway what about shipment to J4x1x6?



shazy has exceeded their stored private messages quota and cannot accept further messages until they clear some space.


still cant send you that PM with price bud!!!



Adam
THM

PM a price to 02184. thanks

oh crap i'll delete some now... sorry about that.

PM a price to 02184. thanks

oh crap i'll delete some now... sorry about that.

All good.....

All PM's sent!!



Adam
THM

whats the price shipped to 34668, thanks

whats the price shipped to 34668, thanks

PM sent!!!

how would it sound if you kept the OEM cat and just add the midpip in?

how would it sound if you kept the OEM cat and just add the midpip in?

a midpipe is a hollow piping without the cat. So adding the cat would give you exactly what you have now.

yeah i didnt mean to say it that way, what i ment to say is how would it sound if i installed this midpiping on my OEM exhaust, taking out the old cat for this

more sound, but the stock exhaust muffles pretty well, so it won't be as loud as most stock cat + aftermarket exhaust combos.

here's my car with a resonated midpipe + stock cat: http://www.youtube.com/watch?v=KZJXC3SjEyw

more sound, but the stock exhaust muffles pretty well, so it won't be as loud as most stock cat + aftermarket exhaust combos.

here's my car with a resonated midpipe + stock cat: http://www.youtube.com/watch?v=KZJXC3SjEyw

Thanks mysql for beating me to the answer....lol



Adam
THM

Halloween special - $50 off

the midpipe is much lighter than the stocker...we did not see a need for one since i have mine on for almost 3 years now without these. And I had an Rx7store one too without any banging or clearance issues....but the welds fell apart and the metal quality was poor.

I can get hangers welded on for those who would want that :yesnod: :biggthump:

Could you measure the weight of your mid-pipe?
Halloween special - $50 off
Curious. PM me the Halloween special price shipped to 22932.

Thanks!

-Chike

please pm me the Halloween special price shipped to 75094

Shipped to 23703?

I was also wondering what you would suggest as being the best exhaust to go with this. I have been looking at the HKS Legamax, but it quite pricey and to be honest, I know very little about the exhaust and what would be best for the RX8. To be honest, I have only been going off of the sounds I hear from the videos posted.

I currently have the AEM CAI, any suggestions for exhuast?

Thanks

please pm me the Halloween special price shipped to 75094

You got PM!!!


Shipped to 23703?

I was also wondering what you would suggest as being the best exhaust to go with this. I have been looking at the HKS Legamax, but it quite pricey and to be honest, I know very little about the exhaust and what would be best for the RX8. To be honest, I have only been going off of the sounds I hear from the videos posted.

I currently have the AEM CAI, any suggestions for exhuast?

Thanks

I can do $889 SHIPPED on the HKS!!!

but the best exhaust we have is the Agency power one!!

check out our post.

http://www.rx8club.com/showthread.php?t=181859

LMK!!!

2 in stock



Adam
THM



Could you measure the weight of your mid-pipe?

Curious. PM me the Halloween special price shipped to 22932.

Thanks!

-Chike

12 LBS.

you have PM!!!

LMK guys... $50 off is still good!!!


Adam
THM

I may be sending you a PM shortly, my supercat is about to go out and may look into this!

I may be sending you a PM shortly, my supercat is about to go out and may look into this!

that is the difference in the parts that we used to make these.

Hit me up when you are ready.

I have 2 left

i'm running my midpipe now without a hanger..perfectly fine

Says the non engineer.


Stress is a sucky thing, theres a reason the hangar is there. It may weigh LESS, but its not weightless.


I will PM later this evening on my options.


I would not buy one without a hangar..I dont need that all sagging in a few years..when its too late, cuz all the flanges are all warped, and you're ultimately screwed ever getting things to seal correctly down the road without replacing everything.


Been there, did that.

Says the non engineer.


Stress is a sucky thing, theres a reason the hangar is there. It may weigh LESS, but its not weightless.


I will PM later this evening on my options.


I would not buy one without a hangar..I dont need that all sagging in a few years..when its too late, cuz all the flanges are all warped, and you're ultimately screwed ever getting things to seal correctly down the road without replacing everything.


Been there, did that.


A hanger can always be welded on.


Adam
THM

whole sale pricing on the next midpipe purchase!!!

pricing shipped to 02155 please?

pricing shipped to 02155 please?

you go PM!!!

price decreases!!!

Re-quote to 02155 with the price drop please?

Re-quote to 02155 with the price drop please?

PM sent with new pricing!!!


-Adam

price decreases!!!

Price sent to 98121. Whats the cost to adding the hanger and with out?

92118?

Any comparisons between this midpipe and others, like BHR's, RB DR, etc etc?

i have the turbo xs non-res racepipe...too loud
do u think this pipe will quiet the beast???
shipped to 31014...thanks

Quote shipped to 08234

Thank you!

i have the turbo xs non-res racepipe...too loud
do u think this pipe will quiet the beast???
shipped to 31014...thanks

yeah its a massive vibrant rez so it will definitely help the noise cancellation and the raspyness.

Quote shipped to 08234

Thank you!

PM's sent!!!


-Adam

I still didnt get my quote to 92118, rageeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Price sent to 98121. Whats the cost to adding the hanger and with out?

92118?

Yeah i was staring at the chick in your signature and totally missed you.


PM sent now for sure.


-Adam

price shipped to 91761

price shipped to 91761

you got PM!!!

ok well i installed this mid-pipe along with exoticspeed r1-t 3in catback and obx header! very very very loud! the flange would not fit bolt on.. had to rethread and modify it a bit! GREAT quality product, love it...

http://s14.photobucket.com/albums/a312/martelmarkus/?action=view&current=P1080002.flv&newest=1

Pricing quote sent to 32927?

pm me for price to 72076.. I am in neeed of one of these...

could i get a PM with the price please?

All PMs sent!!!

Interested price shipped to 55430? Thanks Adam

Interested price shipped to 55430? Thanks Adam



Ohhh...stig...lol.


you have PM!!!

thanks adam I am looking at adding this to my Racing beat catback for a Head turning exhaust note...... :owned:

thanks adam I am looking at adding this to my Racing beat catback for a Head turning exhaust note...... :owned:

NP,

that should be a good combo...LMK if you have any questions or when you are all set.


Thank you


-Adam

Could I get a price quote shipped to 41015, and I would need one with hangers idk if that effects the price. Also are the gaskets for the exhaust able to fit on this 3 inch pipe without any problem??

Price quote to 92130 please!! thanks

Is it possible for overseas shipping? Im in portugal, Pm if available, i will give info you need

awesome product, thanks

how much cost the shipping to spain??

thanks

Are these in stock, can you give me a price shipped to 28210?

Thanks

All PMs sent!!!

Got the PM, thanks, Do you guys happen to know the weight of this Midpipe? Thanks

Got the PM, thanks, Do you guys happen to know the weight of this Midpipe? Thanks

12 lbs


-Adam

updated pm to 32927, discussing it with my dad

updated pm to 32927, discussing it with my dad

you got PM!!!


LMK boss

price quote for shipped to 91745? company address.

How much shipped to 91342??

How much is it shipped to 34652?

And it will directly bolt on to a Greddy SP2? I love the tone from that video. XD

price quote for shipped to 91745? company address.

PM sent!!!

How much shipped to 91342??

PM sent!!!

How much is it shipped to 34652?

And it will directly bolt on to a Greddy SP2? I love the tone from that video. XD

Yes it will bolt right up nicely!!! ............not sure if you saw the first post and the video of the Blue RX8 with the Greddy SP2 exhaust. So there is your proof boss!!!


-Adam

Mine's coming in this week!!! I'll post up video with my MS exhaust with it on. Thanks THM:wiggle:
-Martin W

Pm'd 33067.

Price quote shipped to 03034?

Can you quote me for Canada, Alberta, T3H4X6. thx

pm'd

All PMs responded to!!!

Got my THMotorsports Resonated Midpipe today and everything fit great and It sounds soooo nice. It didn't make it obnoxiously loud or even raspy really. I'll put up a link for video later and pics tomorrow when there's some light. Thanks THMotorsports!

PM me price please!

Got my THMotorsports Resonated Midpipe today and everything fit great and It sounds soooo nice. It didn't make it obnoxiously loud or even raspy really. I'll put up a link for video later and pics tomorrow when there's some light. Thanks THMotorsports!


Sweet!!!

thank you for your order!!!





PM me price please!

you have PM!!!

mine came today and it looks glorious! haha, cant wait to get that sucker on :rock:

i will be ordering mine next week! :D

Does anyone have a video of this installed with the stock exhaust? Thanks. Looking for a sound clip btw.

Does anyone have a video of this installed with the stock exhaust? Thanks. Looking for a sound clip btw.

theres one on the first posts... look for it

54880 please

i will be ordering mine next week! :D

Does anyone have a video of this installed with the stock exhaust? Thanks. Looking for a sound clip btw.

theres one on the first posts... look for it

Thanks guys....



All PMs sent!!!


-Adam

PMs sent!!!

Just ordered mine not five minutes ago! Friendly guy right there!^^^^ Cant wait to get it and put it on my 8 =DDD

Just ordered mine not five minutes ago! Friendly guy right there!^^^^ Cant wait to get it and put it on my 8 =DDD

Sweeet!!!
already shipped out....and you got our last one.

More to come.

trying to make some time to have the 2nd get THM midpipes made!!!



I will keep you guys posted.



Adam

Does this throw CEL? If so any fixes people have come across?

Can I get a shipped price to 68410, with the hanger welded on?
thanks

Does this throw CEL? If so any fixes people have come across?

yes it will throw a CEL due to not having a cat. ( catalytic efficiency ) you can get a defouler.

-Adam

Can I get a shipped price to 68410, with the hanger welded on?
thanks

I havent had any time to make more...we do have Agency Power dual resonated pipes with a hanger in stock BTW @ $216 SHIPPED!!!


LMK

-Adam

pm price to 07606 thanks

pm price to 07606 thanks

Sorry we do not have these anymore. It takes a lot of time for me to make these and I am not sure when i will make them again...perhaps this winter.

check out our sale on the AP midpipes @ $216 SHIPPED!!!




http://thmotorsports.rpmware.com/Client/493c6f3e-e979-4c53-a24c-b17ecfb328bc/thmotorsports-leaderboard.gif (http://thmotorsports.com)


Agency Power Dual Resonated Midpipes w/ hangar @ $216 SHIPPED!!!

http://d5otzd52uv6zz.cloudfront.net/f22b4798-cefc-45a5-a015-550fa3f4692b-800.jpg

http://d5otzd52uv6zz.cloudfront.net/028a66ab-7fc6-4571-9673-400e500c8ade-800.jpg

http://d5otzd52uv6zz.cloudfront.net/3e208d59-b1f4-4f4f-9178-5b4628992767-800.jpg


Product Review:

Roaring Rotor, Tuesday, March 30, 2010

2004 Rx8 GT 6SP MT – Exotic Speed S1-T Catback – K&N Typhoon II Intake

I just got this installed on Saturday March 27th 2010. Weight reduction and free flow are a big plus for this. Installation was Simple if you have a hardware kit – but most of the hardware Depending on your Cat-back don’t fit right, esp the Spring bolts. Remember that the Header Bolt heads don’t turn, they are locked in place, and you turn the Nuts on them, suggestion is to get some royal purple Penetrating Lubricant hitting each bolt both sides, and where the pipes come together and let it sit for a good 10 minutes or more and then the nuts come right off. First startup noticed more smoke than normal obviously since emission restriction cat was gone, and idle was much louder and grumble, much like a modded srt4 without the turbo spool. Once you give it low RPM’s it retains the tone of your Exhaust well for mine is very deep. when you get over the 3500rpm+ and the secondary injectors fire it releases the Rotary screaming and sounds like a race car. can definitely tell it rev’s up and down faster, and noticed a significant power Boost for sure. if you have an already loud exhaust with the Cat – beware because it is EXTREMELY Loud and mine produces 6”+ Fireballs when running for awhile and revving up to around 5500-8000RPM and letting off. I am Very happy with this product and THM’s service to get it and the price they offer it for! can’t go wrong! just be careful and shift low when Police are around because i Guarantee you’ll get a ticket if you Romp down on it


Limited Quantities!!! :naughty:

all in stock!!!

ready to ship!!!

LOCAL PICKUP OK!!!

PM with price shipped to 22180 . thank you

Will this bolt up to an otherwise stock exhaust? Also, how does it affect noise? I'm looking for a lot at high RPMs, but not deafening around town.

Will this bolt up to an otherwise stock exhaust? Also, how does it affect noise? I'm looking for a lot at high RPMs, but not deafening around town.



PM with price shipped to 22180 . thank you



Sorry guys these are not currently in production...at least not at this moment.

check out our Agency Power midpipes though....@ $216 SHIPPED its a sick deal!!!


http://www.rx8club.com/showthread.php?t=198620



-Adam@THM

Price sent to 35023. thx!

Price sent to 35023. thx!

sorry dude not currently in production...maybe in the distant future.

I will PM you


-Adam

I got my midpipe! It looks amazing. BUMP for a great seller, super fast shipping and great customer service. Thanks!

I got my midpipe! It looks amazing. BUMP for a great seller, super fast shipping and great customer service. Thanks!

Thank you sir!!!

How does the sound compare to the AP dual-resonated midpipe?

How does the sound compare to the AP dual-resonated midpipe?

Well this one was designed with much higher quality materials. Better Stainless steel, better flanges, better resonator that has a 4 year warranty!!!

However I currently don't have these made...It takes me a while to make these...even though I have a jig and all. But I have no time.

Perhaps in the spring/summer I will have some more made.

-Adam