Fs: Dual nozzle nitrous kit and more!!
Fs: Dual nozzle nitrous kit and more!!
I have been planning on going nitrous with my car for some time now. With alot of research and time spent PMing Charles R. Hill, i decided to go with a dual nozzle setup. Both Nozzles would have been tapped into the intake flange where it meets the metal intake. (Charles had this setup on his car awhile back). However, I have decided to go turbo instead of nitrous. Just for the simple reason that a kit came along and i had the money to do so.
The Nitrous kit itself i bought and has been used for about two bottles total. Its basically a new kit. Everything is included with the kit that was originally there. In addition to the standard ZEX kit, there is a second nozzle and all the lines and fittings needed to do the dual nozzle setup. the lines and fittings for the second nozzle are new and are still in original packaging. One of the Nozzles is New looking, the other has some minor scrathces.
Here are the four shorter lines and tees and a spare line that i was goin to use to give me some flexability on where to mount the purge.
For the whole kit dual nozzle setup i would like to get $450.
I also have a AutoMeter Nexus series Nitrous gauge. This is NEW never installed and is still in the box. I would like $75 For the gauge.
I Also have - also posed in a previous Thread awhile back - a set of TSW Thruxton wheels. They are 18x8 with a +40 Offset. I would prefer that these go local. They are in good condition with some wear on the lip from daily driving and rock chips. I am asking $400 for the set.
I also have an emanage ultimate harness that i would like to sell. It has the rewiering done to it per a thread by MM for NA use. It was rewired to remove fuel also. $75 for it.
I will post pictures of anything if interest is shown. All prices are Plus shipping if shipping is required. Thanks for looking
The Nitrous kit itself i bought and has been used for about two bottles total. Its basically a new kit. Everything is included with the kit that was originally there. In addition to the standard ZEX kit, there is a second nozzle and all the lines and fittings needed to do the dual nozzle setup. the lines and fittings for the second nozzle are new and are still in original packaging. One of the Nozzles is New looking, the other has some minor scrathces.
Here are the four shorter lines and tees and a spare line that i was goin to use to give me some flexability on where to mount the purge.
For the whole kit dual nozzle setup i would like to get $450.
I also have a AutoMeter Nexus series Nitrous gauge. This is NEW never installed and is still in the box. I would like $75 For the gauge.
I Also have - also posed in a previous Thread awhile back - a set of TSW Thruxton wheels. They are 18x8 with a +40 Offset. I would prefer that these go local. They are in good condition with some wear on the lip from daily driving and rock chips. I am asking $400 for the set.
I also have an emanage ultimate harness that i would like to sell. It has the rewiering done to it per a thread by MM for NA use. It was rewired to remove fuel also. $75 for it.
I will post pictures of anything if interest is shown. All prices are Plus shipping if shipping is required. Thanks for looking
Last edited by Phish806; May 14, 2009 at 06:54 AM.
Nope no Purge. I was just going to use an extra selonoid that a friend of mine had. The line is a 4ft line i believe. Its not needed in mounting hte purge i just wanted to have it on hand for some more options
Thread
Thread Starter
Forum
Replies
Last Post
TotalAutoPerformance
Vendor Classifieds
12
Oct 17, 2018 09:00 AM
jasonrxeight
RX-8's For Sale/Wanted
2
Sep 30, 2015 01:53 PM
Digitz0070
Series I Aftermarket Performance Modifications
5
Sep 25, 2015 10:58 PM
