View Full Version : Injector Installation Help
alienRX8 02-19-2009, 11:05 PM So I was looking at the workshop manual for the RX8 to help me with my injector installation and I cant seem to find out where the primary/secondary/primary2 injectors are. I did read about colors and supposedly the primary2 are yellow wich are the ones im switching out but im not sure if thats correct.
Anyone got any help?
Primaries are normally Red - on the outside of the rail with 4 injectors. P2 and Secondaries are yellow - P2's on the inside of the Primary Rail and the Secondaires on the Secondary rail (the one with two injectors only).
chickenwafer 02-19-2009, 11:15 PM You want to swap out the two injectors in the TOP rail mounted in the middle. Those are the P2 injectors.
^^^ That was an easier explanation....
alienRX8 02-19-2009, 11:49 PM cool thanks :D need to know eactly since im meeting up with my mechanic tomorrow to start work on it :D
thanks!
MazdaManiac 02-24-2009, 02:31 AM Anyone want to explain to me why I even bother starting threads like this:
http://www.rx8club.com/showthread.php?t=150432
let alone have them made into stickies?
Anyone want to explain to me why I even bother starting threads like this:
http://www.rx8club.com/showthread.php?t=150432
let alone have them made into stickies?
HAHA - you care about stuff....
;)
baysj 02-24-2009, 07:08 AM Anyone want to explain to me why I even bother starting threads like this:
http://www.rx8club.com/showthread.php?t=150432
let alone have them made into stickies?
Because I used it for my install and it was amazingly useful :)
alienRX8 02-24-2009, 07:30 AM sorry didnt see that thanks for burning my flame suit GOD haha
Charles R. Hill 02-24-2009, 08:22 AM I am beginning to understand, now, Ramon.............:lol2:
This job makes me wanna punch a Koala Bear sometimes.:lol:
baysj 02-24-2009, 08:44 AM What did the Koala do to you?
Charles R. Hill 02-24-2009, 08:46 AM It was a reference to a funny Super Bowl commercial.
http://www.youtube.com/watch?v=79tMMFja-Fw
I got it Charles.
MazdaManiac 02-24-2009, 09:35 AM "Oh dear!"
Charles R. Hill 02-24-2009, 09:54 AM ..... and Easy would have you all believe I am his co-worker who doesn't respect him. My daughter's boyfriend, yes. Easy, no.
"Hey Dummy". :lol2:
MazdaManiac 02-24-2009, 09:56 AM That's my favorite part of that commercial.
Charles R. Hill 02-24-2009, 10:03 AM Mine, too, besides the Koala bear.
Hey, MM, clear some PM space willya?
J.Cab 02-24-2009, 10:57 AM MM,
Just wanted to know if there was a waiting list on fuel injectors (730cc to be exact). I am getting ready to have the car on jacks for about 1.5 weeks and would like to do the fuel injectors at once as well.
Easy_E1 02-24-2009, 11:06 AM ..... and Easy would have you all believe I am his co-worker who doesn't respect him. My daughter's boyfriend, yes. Easy, no.
"Hey Dummy". :lol2:
http://i.realone.com/assets/rn/img/7/9/8/7/25807897-25807901-large.jpg
alienRX8 02-24-2009, 01:23 PM haha I love that commercial
alienRX8 02-24-2009, 01:24 PM by the way the injectors are already installed, just finishing up on tweaking how the turbocharger sits and ill be ready to go drive it. Ignition is already installed too and the map is also installed and the car has been turned on to check idle etc. So far so good.
Easy_E1 02-24-2009, 01:30 PM Keep us posted.
Charles R. Hill 02-24-2009, 02:40 PM by the way the injectors are already installed, just finishing up on tweaking how the turbocharger sits and ill be ready to go drive it. Ignition is already installed too and the map is also installed and the car has been turned on to check idle etc. So far so good.
Ramon, did you lube the injector o-rings with silicone and did you pressure-test the system before re-installing the UIM?
dannobre 02-24-2009, 06:58 PM Primaries are normally Red - on the outside of the rail with 4 injectors. P2 and Secondaries are yellow - P2's on the inside of the Primary Rail and the Secondaires on the Secondary rail (the one with two injectors only).
HUH ;)
Primaries are red...go into the block The small fuel rail
Secondaries are the outside 2 on the other fuel rail that goes into the manifold...and P2's are the inside 2 injectors....these 4 are all yellow stock
Yeah you are right..... I was typing too fast (and a bit buzzed) - LOL
But I am too lazy to go back and fix it.
alienRX8 02-24-2009, 07:06 PM Ramon, did you lube the injector o-rings with silicone and did you pressure-test the system before re-installing the UIM?
My mechanic did it so I hope he knows what he is doing haha
dannobre 02-24-2009, 07:08 PM Rum and Cokes again ;)
Damn..I want to move to Hawaii :)
Yeah - I tend to do that sometimes.... especially on vacation.
Charles R. Hill 02-24-2009, 07:25 PM Rum and Cokes again ;)
Damn..I want to move to Hawaii :)
You can hide in my luggage, Dan, as Michelle and I are headed out to see Kane and Kimi next week.;)
And secret number one is out..... LOLZ
I still have a few more though.
dannobre 02-24-2009, 07:35 PM Don;'t tempt me....The Boss is complaining about us needing a holiday :)
alienRX8 02-24-2009, 09:46 PM Pfft Hawaii, its nice ill give you that. But the best rotaries are in Puerto Rico :P
|