hey guys...quick question...

How do I pull these plastic thingies out?? I tried pulling them. I tried pushing them out from the top. Nothing seems to work. I don't want to force it too hard since they're plastic. I don't want them broken off... ...tips?? suggestions??

Thanks in advance!

http://i22.photobucket.com/albums/b318/shaolin_dropout/exhausttrim2.jpg

http://i22.photobucket.com/albums/b318/shaolin_dropout/exhausttrim1.jpg

get a thin surface blade wedge in the seem of the center cap and pop it out, if you can get to it the post is a self setting post you can squeeze it and that should help it slide out

heres a doodle,,, and some pics to help understand how they work....

I think I tried that..They seem to be stuck....but I'll wash them a bit and try it properly again when I get home tonight....

Thanks, man! :D

dont be affraid to break them either, I have a whole bag of emm sitting in my basement for times whem i take my bumpper off or trunk liner off or whatever,,,
they re pretty cheap...

It takes quite a bit of force to get them out. Just keep trying.....you'll get them off eventually.

are you putting in a new exhaust? if so you dont even need to take those off.

Yeah just break them...You can get a new set of whatever size at your local autozone.

pull harder they are not so easy to brake :)

This might be of help
http://www.mazdatrix.com/faqrx8/exhfinish.htm

flat head screwdriver is all you need

^+1

loosen up the opposite side and it'll help as well.