so i search and search :banghead: bud i can't find it
so anyone help me, i got some LEDS I want to wire one set to the dome lights
so when you open the doors they lid and the other set i will like to wire it to the dimmer ??

help any one ???

PM RotaryRasp, he might be able to help you. The man is a wiring guru.

thanks

sebastian tap them into the courtesy lights, i'm making my own footwell lights out of 12v cold cathodes.. i'll show you next week at the meet.

To be a little more in depth.. you have to power (+) from somewhere then ground your lights to the green/black connector (-) from the driver side kick panel. The green/black wire is the door trigger that goes with the courtesy lights.

Thats Why You Blow You Ac Fuse Last Time Bro Hahahaha

nono, my fuse blew because there was a grommet in my radiator fan so the fan couldn't turn at all.. NOOB.

i would also like to know where to connect my leds i have made a set of red and blue into the same board. i have the red hooked up to the driving lights and the blues i need help to hook into the door lights so that when i unlock or open my door they come on and fade out with the rest of the lights.

that would be the courtesy light circuit. They fade out.

that would be the courtesy light circuit. They fade out.

i just need know know which wires to tap into. i dont have a wiring guide

Blue red stripe for power and green black stripe for ground. Get it from the harness that comes out of drivers door.....

Blue red stripe for power and green black stripe for ground. Get it from the harness that comes out of drivers door.....

thank you