So I was looking around the forum and i seen the bodykit section. I finally desided that i like the Veilside 2 bodykit the most and I want to get one in the distant future.

How many of you have them? Did you have any problems with yours? What website did you order yours from? what did your total cost come out to be? (im going for the whole set, side skirts and all)


I searched a little but im lazy. ps. thats me in my sig.

http://www.veilside.com/veilsideusa/aero/mazda/RX-8%20D1GT.htm#

this is the one... I dont really like the hood though.

ewwww. that kit be the nasty. contact JonDemand for help with kits. they are a forum vendor and get you lots of goodies and even sexier kits.

never heard of veilside

^ lol!!! :lol:

lmao, good 'ol chris for ya!

-Steakboy

i remember people calling it failside. anyone heard of that? LOL

i remember people calling it failside. anyone heard of that? LOL

:lol2:

...

get mazdaspeed kit, its so SeXy.............................






im gonna go take a cold shower

Im sorry but i gotta say MS is way overplayed. If you want veilside go get it , not my thing tho ( although i like the rear and side skirts). Look at Chris car , now thats aggressive :).

feilside is ED isnt it?

I can never understand what youre talking about chris but you look like the guy I should be talking to about this bodykit.

well there is no such thing as veilside version 2....its either version one or d1-gt.....you dont want to get a replica because fit is awful on it....have you surfed veilside's website for pics and info?....wh have a vendor here that can get it for you at a good price as well.....pm lazi for that part...other than that what you wanna know?

I can never understand what youre talking about chris ...

No one does.

just smile, nod and direct him over to the pizza

yeah i didnt think thats what it was called, someone else said it to me. Im going to go on their site to do some research.

Sides and Rear are in stock in USA too.
No fronts yet though....

:)

thats only for pie....and brian wtf r u talkin bout??

??????????????

Looking at our inventory in quickbooks....
Telling you what is in stock at VeilSide USA.
Just FYI kinda stuff....

ooh if your real i would love to find out where i can get some impossible to find VS emblems and front windshield banner

do you know when the fronts are going to be in stock?

Impossible?

We have tons in stock

Which emblems? The rock emblems or the small stainless steel emblems?

We recently got the windshield banners in. We have a bunch.


oh looks like we got a front bumper in stock today. Just got a container last night.

No diesrespect to veilside, but the kit for the 8 is horrible... reminds of something Bomex or wings west would make...

Veilsidebrian, maybe you can tell the designers to actually make a good looking kit for the 8.

i fit right in with chrism....just the female version...

i have a failside combo :rollingla

V1 front lip and D1GT sides and rear....just not a fan of the D1GT front (no offense suga)

:D:

Impossible?

We have tons in stock

Which emblems? The rock emblems or the small stainless steel emblems?

We recently got the windshield banners in. We have a bunch.


oh looks like we got a front bumper in stock today. Just got a container last night.

the windshield banner was supposed to be discontinued and i have the stone emblem in front i wanted the oval emblem for the rear.....put some pics up of the ones you have....lets see some product!

I don't like a lot of our kits too much, but I DO like the RX8 kit. The D1GT kit is pretty nice in my opinion.
There is only one guy who designs the kits... President Yokomaku.

I don't know of any oval emblems that we have.
Windshield banners were never discontinued, we just have had a hard time getting them made... but not they are done and ready.

On a sidenote - brian what do you reccomend doing about the melting tips for the D1GT rear for people who have "other than stock" exhausts?

do you have any places you can recommend brian on where to get the banner?

On a sidenote - brian what do you reccomend doing about the melting tips for the D1GT rear for people who have "other than stock" exhausts?

mine doesnt melt.....i have a borla and there is plenty of clearance....
i think the V1 rear is the culprit... :D:

I suppose with the urethane rear lip, you could try to fabricate or buy a metal heat shield to put on there. I know that some aftermarket ones exist. sometimes they offer carbon ones... other than that....i don't know what to tell you. :(

banner - order direct from us or order from one of OUR dealers. It's going to be boxed up by me anyways....

I suppose with the urethane rear lip, you could try to fabricate or buy a metal heat shield to put on there. I know that some aftermarket ones exist. sometimes they offer carbon ones... other than that....i don't know what to tell you. :(

banner - order direct from us or order from one of OUR dealers. It's going to be boxed up by me anyways....

hey i just have a question...i just PM'd one of the forum vendors about the D1ht body kit and he said veilside does'nt make urithane body kits... i was under the impression that's all they made. i have the MS front facia made out of fiber glass. It looks great but it's fragile as hell. i just hit some crap on the highway and it cracked the bottom left corner of it :banghead: ... so now im looking to get either the V.1 or D1GT body kit.
thanks in advance
-Max

the windshield banner was supposed to be discontinued and i have the stone emblem in front i wanted the oval emblem for the rear.....put some pics up of the ones you have....lets see some product!

how do u like the kit? is yours fiberglass or urithane?

V.1 is urethane and unbreakable.
D1GT is fiberglass as far as I know.

ive got the authentic V1 and its definitely urethane.


my D1GT skirts and rear are frp...but they are a replica also....
im not sure about the authentic D1GT tho

ive got the authentic V1 and its definitely urethane.


my D1GT skirts and rear are frp...but they are a replica also....
im not sure about the authentic D1GT tho

thanks guys...i've had some bad luck with my fiberglass kit recently and vowed now to get another. i think Urethane is the only way to go if your ride is lowered.

thanks guys...i've had some bad luck with my fiberglass kit recently and vowed now to get another. i think Urethane is the only way to go if your ride is lowered.

i agree....but when looking at JDM kits...im told that most are made in frp unfortunately...

so, if you want the hawt lookin body kits you have to compromise unfortunately...

:D:

Making a full bumper out of Urethane is pretty much NOT going to happen.
Urethane is pretty heavy and it is really flexible. Put those two together and you will NOT have a good full bumper.

Our D1GT kit is full FRP fiberglass. We offer a warranty with all our kits though. If you break anything for any reason, you can buy a replacement for 50% off. Find me anybody else who does that. A fiberglass kit is probably going to break at some point for sure, no matter who makes it. So, the fact that we offer this warranty is pretty rare I think.

The version 1 kit is urethane. It is much "stronger" than the FRP. But just ask anybody who has one, they are heavy and flexible.

I hope this helped with questions and concerns.

Let me know what I can do!

mine is frp and its damn strong (i have the real D1-GT).....not like that crappy US knock off FG thats thin as hell....i am lowered and i have accidentally scraped a few times and so far its sturdy.....i honestly cant complain at all

Making a full bumper out of Urethane is pretty much NOT going to happen.
Urethane is pretty heavy and it is really flexible. Put those two together and you will NOT have a good full bumper.

Our D1GT kit is full FRP fiberglass. We offer a warranty with all our kits though. If you break anything for any reason, you can buy a replacement for 50% off. Find me anybody else who does that. A fiberglass kit is probably going to break at some point for sure, no matter who makes it. So, the fact that we offer this warranty is pretty rare I think.

The version 1 kit is urethane. It is much "stronger" than the FRP. But just ask anybody who has one, they are heavy and flexible.

I hope this helped with questions and concerns.

Let me know what I can do!

thanks for answering my questions... I did'nt think urethane was heavier... i'll have to get back to you towards the end of june when you guys get some more kits in. one concern- is the rear bumber complete or is it just a bottom peice that you have to mold on?

@ Fortunate Few: Maybe u should check with Nalin. I think he's the "Failside Expert"

thanks for answering my questions... I did'nt think urethane was heavier... i'll have to get back to you towards the end of june when you guys get some more kits in. one concern- is the rear bumber complete or is it just a bottom peice that you have to mold on?

rear bumper is all one piece :D:

Yes rear D1GT bumper is a full bumper
rear Version 1 lip is just a add on lip

chrism - glad you enjoy the products. Good to know there are people who bought the real product and can tell others that it is durable!

all the locals on the east coast know my car, the fit and finish of the product and have always complimented me on it.....like i said i have no complaints....