RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   VividRacing.com (https://www.rx8club.com/vividracing-com-59/)
-   -   Sale On Brake Package!!!! (https://www.rx8club.com/vividracing-com-59/sale-brake-package-82951/)

VividRacing.com 02-15-2006 01:42 PM

Sale On Brake Package!!!!
 
We have put together a full front and rear brake package for your RX8 which includes all rotors, pads, lines, and fluid all in one happy little package!!! Below is a list of all parts included in the package!! The whole package is a total of $735.00 plus shipping. Please PM or call for shipping prices!!!


Rotora Mazda RX8 Drilled & Slotted OE Rotors

http://www.vividracing.com/catalog/i...oradrilled.jpg

Rotora performance discs are designed to meet the challenges of track and road racing. CNC machined, Rotora’s performance replacement rotors features slotted, or cross-drilled and slotted combination: all are applied to the disc’s front and back surfaces to ensure maximum heat and gas dissipation for greater stopping power and minimize warping and cracking caused by repeated, high stress, high temperature braking. In exceeding all vehicle manufacturers’ specifications and tolerances, Rotora's performance brake rotors match the vehicle’s OE (original equipment) rotor’s dimensions and are fully compatible with its hubs, calipers and wheels. With an “e-coat” (black) plating finish as an added protective layer to reduce corrosion and prolong rotor life, Rotora’s high-quality and specifications are assured that every component meet and exceed worldwide ISO 9000 quality standards.

Agency Power Front and Rear Steel Braided Brake Lines RX8 03+

http://www.vividracing.com/catalog/i...piecelinea.jpg

Agency Power now has a wide variety of steel braided brake line and clutch line kits for most high-end performance cars. The brake line and clutch line kits are made in the USA to meet strict D.O.T. certifications. The steel braided lines are a smoke color with the AP logo printed on it. The CNC machined fittings are in classic Agency Power Gold to separate you from the competition. All kits are assembled for a quit and easy install. Include fittings, hoses, and necessary hardware.

Steel Braided lines improve component performance over the stock rubber hose. With rubber hose, the fluid under pressure flexes the hose, cause loss in firmness and reaction. With the steel braided lines, the response is firmer giving you more control.




Project Mu Front and Rear Brake Pad NS RX-8

http://www.vividracing.com/catalog/i...projectmu1.jpg

Street Brake Pad with Superior Initial Stopping Power - Developed specifically for the street, NS outperforms any stock brake pads. Reliable in any weather or road conditions, NS gives outstanding initial stopping power which is a prime importance on the street. In addition to reducing brake dust and squeal, NS helps keep rotor wear to a minimum. Applicable Rotor Temp: (F&R) 0 to 400 deg. Celsius


Motul RBF600 Synthetic DOT4 Brake Fluid (x2)

Extreme thermal resistance and stability.
The elevated boiling point of RBF 600 FACTORY LINE (312°c / 593°F) enables effective braking even under the extreme conditions of competition.
Very efficient in the rain: the very high wet boiling point (216°c / 420°F), is superior to conventional brake fluids and provides a particularly efficient braking system in rain and minimizes the risk of vapor lock.

09Factor 02-28-2006 11:23 AM

hmmm Very Tempting Dan

VividRacing.com 02-28-2006 11:35 AM

It's a nice package, let me know if you were interested and I'll put it all together for you.


Originally Posted by 09Factor
hmmm Very Tempting Dan


Bricktop 03-02-2006 09:25 AM

Is this set-up much more noisy than stock? I put aftermarket pads and rotors on my previous car and it made the worse grinding sound whenever I stopped. Is that the morm for non-OE brakes or did I just have a bad set-up?

VividRacing.com 03-02-2006 10:57 AM

The NS are made to be a street ready performance pad. They give you the quiet sound with the optimum stopping necessary for your modded vehicele. So to answer your question, no they won't be noisy.


Originally Posted by Bricktop
Is this set-up much more noisy than stock? I put aftermarket pads and rotors on my previous car and it made the worse grinding sound whenever I stopped. Is that the morm for non-OE brakes or did I just have a bad set-up?


RX-Aight 03-02-2006 11:48 AM

looks like a good price, what 'bout calipers?

VividRacing.com 03-02-2006 01:24 PM

If you are interested in a full big brake kit please pm me which you were interested and I can get you a price. Thank You


Originally Posted by RX-Aight
looks like a good price, what 'bout calipers?


toca 03-03-2006 03:51 PM

r u going to have this deal for awhile need to save of some cash first

XeRo 03-03-2006 04:16 PM

dammit Dan...that price is too good...you're gonna cause me a divorce..

VividRacing.com 03-03-2006 04:25 PM

Yes we will, take your time


Originally Posted by toca
r u going to have this deal for awhile need to save of some cash first


VividRacing.com 03-03-2006 04:27 PM

Hahaha, that wouldn't be good. Just tell her you wouldn't want her to be widdowed so you need this to stop your car....wouldn't want to t-bone a bus of unsuspecting kids. hahaha


Originally Posted by XeRo
dammit Dan...that price is too good...you're gonna cause me a divorce..


dccr 03-04-2006 07:12 PM

*edit* posted in wrong forum

hondasr4kids 03-04-2006 07:14 PM

any chance of a 2 piece brake kit?


All times are GMT -5. The time now is 10:41 AM.


© 2024 MH Sub I, LLC dba Internet Brands