Notices

Painting Body Parts

Thread Tools
 
Rate Thread
 
Old Jul 4, 2011 | 11:45 PM
  #1  
Bluedevil04's Avatar
Thread Starter
Registered
 
Joined: Apr 2007
Posts: 25
Likes: 0
From: Navarre, Fl
Painting Body Parts

So I finally found the rest of an authentic used mazdaspeed parts for cheap..I have a trunk lid with the spoiler and the bumper a different color shown below..I was bored today so i put them on to see how well they fit..My question with the trunk lid..should I take the spoiler off and install it on my original lid and just get the spoiler painted..body shops said this would be a better option because it will be difficult to match new lid with original paint on the car..(2004 the paint is not new)..If I decided not to do that option they would have to blend and clear coat the original body..I am not looking for perfection but what option would be better..i took a pic of all of it on my car dont mind the wood holding the sideskirts in place.


Name:  IMAG0334.jpg
Views: 62
Size:  80.5 KB
Reply
Old Jul 5, 2011 | 01:02 AM
  #2  
RXeligion's Avatar
The X is silent
 
Joined: Mar 2011
Posts: 688
Likes: 2
From: New Lebanon, Ohio
A reputable body shop will be either to go either route and make it look good. Furthermore, they will be able to tell you which route is cheaper. Either way, you can pretty much count on your painter wanting to blend the paint into you fenders, doors, hood, and quarter panels so that it will look the best it can. Go with whatever your painter suggests, but make sure he is reputable and make dont try to go at this "the cheap way."
Reply
Old Jul 5, 2011 | 01:07 AM
  #3  
Cole33's Avatar
Registered
 
Joined: Jul 2010
Posts: 287
Likes: 1
From: Wood River, IL
The cheapest way should be to remove the spoiler and have it painted to match your car. That is less material to paint that way.
I'm not an expert in painting cars, but it just makes sense that way.
Reply
Old Jul 6, 2011 | 02:00 AM
  #4  
monchie's Avatar
I HATE SPEEDBUMPS!
 
Joined: Nov 2007
Posts: 8,549
Likes: 8
From: Las Vegas, NV
Just leave it as it is...lol
Reply
Old Jul 6, 2011 | 03:14 AM
  #5  
laythor's Avatar
I zoom therefore I am.
 
Joined: Mar 2007
Posts: 4,919
Likes: 12
From: San Jose, CA
I would hope they paint everything from the edge of the front door rearwards, best way to blend in the paint. I would suggest taking off the spoiler whichever way you go you're going to need to take it off to paint it properly.
Reply
Old Jul 7, 2011 | 03:38 AM
  #6  
slvrmzdrx8's Avatar
Stock - O - Licious
 
Joined: Apr 2011
Posts: 224
Likes: 0
From: Colorado
Not to thread jack, it is on the same subject here. I seemed to have a slight boo boo with my 8 today . . . result is that my front bumper is a little jacked up now. Pretty scratched, missing some paint and a little chunk missing. Bottom line, imma need a new one, no point in cobbing this one up with fiber glass or bondo (Iv never been one to half *** **** lol) Long story short, how much you fellas think its going to set me back to have a bumper painted on my car. I can mount it, possibly prime it if the shop is down with me doing it. What am i looking at though, also i say on the bay there is a store that sell's Mazda oem bumpers that come pre painted with Mazda OEM paint codes, paint has a lifetime warranty and seems really legit. My concern was if it would look good, just because its the same exact paint code it still might not blend right , right? thanks for any help guys, and again i don't mean to threadjack bluedevil.
Reply
Old Jul 8, 2011 | 08:40 PM
  #7  
Bluedevil04's Avatar
Thread Starter
Registered
 
Joined: Apr 2007
Posts: 25
Likes: 0
From: Navarre, Fl
Thanks for all the replies..Its going to shop in a few weeks..gonna take the spoiler of the yellow lid and put it on mine..it is cheaper and it will still look good..
Reply
Old Jul 8, 2011 | 08:45 PM
  #8  
MBTwenty's Avatar
Big Machine
 
Joined: Apr 2011
Posts: 118
Likes: 0
From: Columbia, Kentucky
It's going to look good, can't wait to see it finished. I really like those spoilers.
Reply
Old Jul 8, 2011 | 08:54 PM
  #9  
c0ldf1ame's Avatar
Registered
iTrader: (5)
 
Joined: Mar 2004
Posts: 1,394
Likes: 0
From: los angeles, ca
it looks like x-men colors haha
Reply
Old Jul 9, 2011 | 12:54 AM
  #10  
Bluedevil04's Avatar
Thread Starter
Registered
 
Joined: Apr 2007
Posts: 25
Likes: 0
From: Navarre, Fl
Yea..i wasn't really a spoiler guy but after I put to see if I like it..t totally changes the look of the car for the good!!
Reply
Old Aug 18, 2011 | 11:19 PM
  #11  
Bluedevil04's Avatar
Thread Starter
Registered
 
Joined: Apr 2007
Posts: 25
Likes: 0
From: Navarre, Fl
Here's an update..finally got my car back from my shop and the rest of the kit looks great!! I cant believe it took me this long to get it on!! I guess I need to put on my swift springs that have been sitting in my garage for years. Should I get 19s and spacers to make this look a little better? I know this is not the section to ask this but I thought I would pose the question.
Name:  IMAG0364.jpg
Views: 51
Size:  77.0 KB
Name:  IMAG0366.jpg
Views: 65
Size:  124.7 KB

Name:  IMAG0367.jpg
Views: 45
Size:  90.1 KB
Name:  IMAG03651.jpg
Views: 56
Size:  88.6 KB
Reply
Old Aug 18, 2011 | 11:36 PM
  #12  
dmedz8's Avatar
Needs Boost!
iTrader: (5)
 
Joined: Jul 2010
Posts: 828
Likes: 0
From: Lincoln, CA
Looks great man, Congratz
Reply
Old Aug 19, 2011 | 03:11 AM
  #13  
slvrmzdrx8's Avatar
Stock - O - Licious
 
Joined: Apr 2011
Posts: 224
Likes: 0
From: Colorado
Sexy!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
D13
Series I Exterior Appearance and Body Kits
4
Aug 22, 2015 11:42 PM
AllSeeingChris
RX-8 Parts For Sale/Wanted
6
Aug 16, 2015 12:35 PM
Mr.Durden
RX-8's For Sale/Wanted
4
Aug 12, 2015 02:21 PM
AussieGray
RX-8's For Sale/Wanted
0
Jul 16, 2015 03:58 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 03:18 AM.