Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Red Sign of Raditor in my RX-8

Thread Tools
 
Rate Thread
 
Old Mar 1, 2011 | 10:10 PM
  #1  
shaz3333's Avatar
Thread Starter
Registered User
 
Joined: Mar 2011
Posts: 2
Likes: 0
From: Faisalabad Pakistan
Red Sign of Raditor in my RX-8

Hye
i have a 2006 model RX-8.There is a red sign indicator coming in my meter display.Can anybody guide me what is this for?and how to fix it
awaits
Shaz
Reply
Old Mar 1, 2011 | 10:55 PM
  #2  
Mazurfer's Avatar
Surf Hard, Drive Hard
 
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
It's your Engine Coolant Level Warning Light.

I know English probably isn't your first language, so I will try to keep it simple.
I also need to be careful about what I'm about to explain to you and how I explain it.

You first need to make sure your coolant level in the coolant bottle is okay, there are marks on the side of the bottle that are hard to see, but that will tell you that your level is okay. See the below picture for where the marks are.




If the level is NOT where it should be, the car is running hot(does the gauge with the needle sit about where it normally does?), then the below won't work for you and you need to find out how you are loosing coolant. Do notgo to the next steps unless you know that you are not loosing coolant, and your gauge with the needle is okay(usually about 2 marks to the right of center.)


If the coolant level is okay, then you are most likely not having any leaks.
If no leaks, then there is a float inside the bottle that tends to not float anymore when it should be floating and this causes that light to come on.
It's a known problem in this car, but to really cure it, you have to buy a new coolant bottle.

However, if you are okay with checking your coolant level often, then you could unplug the sensor at the connector beside the bottle.
This will turn the light off, but then you would be responsible for checking your coolant level often and you won't get that warning light should you have a leaky hose or something in the future. See the below picture for the connector to unplug.




Again, you really need to make sure that you have the proper amount of coolant and have no leaks or other problems before just unplugging this sensor.


Hope I explained that well enough.
Attached Thumbnails Red Sign of Raditor in my RX-8-coolant_mark.jpg   Red Sign of Raditor in my RX-8-coolant_sensor_locale.jpg  

Last edited by Mazurfer; Mar 1, 2011 at 11:07 PM.
Reply
Old Mar 1, 2011 | 11:47 PM
  #3  
monchie's Avatar
I HATE SPEEDBUMPS!
 
Joined: Nov 2007
Posts: 8,549
Likes: 8
From: Las Vegas, NV
I didn't know they have RX8's in Pakistan
Reply
Old Mar 2, 2011 | 07:03 AM
  #4  
shaz3333's Avatar
Thread Starter
Registered User
 
Joined: Mar 2011
Posts: 2
Likes: 0
From: Faisalabad Pakistan
Yes there are many RX 8 in pakistan now imported from japan....
thanx Mazurfer for ur help.i will check and contact you again if i have any problems
shaz
Reply
Old Mar 3, 2011 | 12:04 AM
  #5  
monchie's Avatar
I HATE SPEEDBUMPS!
 
Joined: Nov 2007
Posts: 8,549
Likes: 8
From: Las Vegas, NV
^ cool
Reply
Old Mar 3, 2011 | 01:50 AM
  #6  
DocBeech's Avatar
I drive at Red Line.
iTrader: (1)
 
Joined: Jul 2010
Posts: 2,137
Likes: 5
From: Dallas, TX
He will have to upgrade the suspension to hold the weight of all the PE4. Otherwise the wheels will rub :P
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Supernaut6
RX-8's For Sale/Wanted
0
Aug 11, 2015 07:28 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 04:01 AM.