So I decided to change the stock coils on my 8 for some LS2 truck coils. I was able to pull some off of ebay for 300$ shipped (set of 8, selling the other four) so 150 for the 4 I need. Additionally I'll be getting this wiring harness. and a set of msd wires and ngk OEM plugs. I'll be posting my progress and hopefully end up with a nice DIY for people who are looking into doing this.

any advice or input is appriciated

 

Ill take the other four

 

sorry, someone already asked for them. I'll let you know if they don't go through with it since I won't be able to ship them till after new years.

 

You wont regret it. I've had mine in for awhile.

 

Damn who did you buy those off of? I got a set of 4 for $80 NIB...let me know if get stuck, built my kit for just under $275 with everything. I've a wire diagram if you need it.

 

ebay. I still have to order the wiring harness, and the msd wires. already have the plugs. Hopefully it'll be straight forward

 

Please PM me it

 

Subscribed

 

Doin the same project. If you could pm the wiring diagram that would be great. Thanks in advance.

 

+1 you should do a diy

 

nice.

as far as input - BHR might be able to provide some

 

Where are you getting your MSD wires and specs on them?

 

I think we've provided more than enough input at this point.

 

true, I've read almost through all of you msd coil project thread. Pretty interesting stuff. One question tho: do I need to do anything to the dwell times of the coils?

 

BHR does not have one.

 

So. When does that patent get on the books...

 

what should i set the spark trig output on my microtech lt10s to? falling edge or rising edge? thanks zack

 

i know someone has to have a microtech with these coils.

 

update: finally got everything I needed and I went ahead and installed everything today. I'll try to post pictures when it get warmer. Overall I didn't notice a lot of difference except that now the power delivery is smooth as opossed to before where the engine kinda hesitated at high rpm's, also my idle is a lot smoother. I just filled her up so I'll report on gas milage as soon as I have a baseline. I did not change the plugs just yet so that might affect the results.

Cheers

 

any info on the spark trig output setting for a microtech?

 

Any Pics of coil setup?

 

what did you do for the bracket? and can you shoot me that wiring diagram? (yes, necropost, sorry.)