FS: Greddy Turbo Kit (perfect for custom build)
Thread Starter
The Man
Joined: May 2006
Posts: 57
Likes: 0
From: Tampa Bay Area
FS: Greddy Turbo Kit (perfect for custom build)
SOLD
Selling my used Greddy Turbo Kit I'd bought awhile back. I never had the chance or money to finish the project or install it. Bought it used from a guy in Tampa, guessing around 20k miles on it, not really sure. Bought from a guy that was stripping his car to trade-in, so everything worked at that time, been sitting in a box in my garage since then. I have since moved from Florida to Indiana, looking for a job, and short on money.
The pipes had oil in them when I bought the kit so the turbo must be getting a lot of blow-by so probably needs to be rebuilt. Needs new couplers and clamps but will send all the originals to make it easier to spec out new ones. Includes a spare engine oil pan and 6AN weld bung for the oil return line. Had a nipple mounted just after the compressor. No cracks in the manifold or downpipe, and have ceramic-painted black. The support bracket for intake pipe was broken when i bought it, so I had a local shop weld a new aluminum brace on, but no hole drilled as I don't know exactly where it needs to be until it's ready to mount. Includes a Greddy Type-R BOV (previous owner had installed).
No EMS is included. I had originally bought the Interceptor-X f/ Turbo, but after having it sitting in the garage for a year decided to trade it out for a NA model so i could actually use it. So I have a Interceptor-X for NA for sale in another post (https://www.rx8club.com/rx-8-parts-sale-wanted-44/fs-interceptor-x-na-w-dash-display-185363/).
This is the perfect kit for someone looking to build a custom Greddy Kit using a BNR or MM turbo.
Asking $1500 or best offer, plus shipping (local preferred).
As a bonus for local buyers, I'll trade out my plastic undertray that has been precut from when I test fitted the cold pipes last year.
I will take trades front and sides of a genuine Mazdaspeed body kit in Velocity Red (no knock offs) or a set of 17x9 Enkei RPF1's (gold-painted preferred).
I'm located in the Indianapolis, IN area and willing to drive a few hours to meet someone to save on shipping.
Selling my used Greddy Turbo Kit I'd bought awhile back. I never had the chance or money to finish the project or install it. Bought it used from a guy in Tampa, guessing around 20k miles on it, not really sure. Bought from a guy that was stripping his car to trade-in, so everything worked at that time, been sitting in a box in my garage since then. I have since moved from Florida to Indiana, looking for a job, and short on money.
The pipes had oil in them when I bought the kit so the turbo must be getting a lot of blow-by so probably needs to be rebuilt. Needs new couplers and clamps but will send all the originals to make it easier to spec out new ones. Includes a spare engine oil pan and 6AN weld bung for the oil return line. Had a nipple mounted just after the compressor. No cracks in the manifold or downpipe, and have ceramic-painted black. The support bracket for intake pipe was broken when i bought it, so I had a local shop weld a new aluminum brace on, but no hole drilled as I don't know exactly where it needs to be until it's ready to mount. Includes a Greddy Type-R BOV (previous owner had installed).
No EMS is included. I had originally bought the Interceptor-X f/ Turbo, but after having it sitting in the garage for a year decided to trade it out for a NA model so i could actually use it. So I have a Interceptor-X for NA for sale in another post (https://www.rx8club.com/rx-8-parts-sale-wanted-44/fs-interceptor-x-na-w-dash-display-185363/).
This is the perfect kit for someone looking to build a custom Greddy Kit using a BNR or MM turbo.
Asking $1500 or best offer, plus shipping (local preferred).
As a bonus for local buyers, I'll trade out my plastic undertray that has been precut from when I test fitted the cold pipes last year.
I will take trades front and sides of a genuine Mazdaspeed body kit in Velocity Red (no knock offs) or a set of 17x9 Enkei RPF1's (gold-painted preferred).
I'm located in the Indianapolis, IN area and willing to drive a few hours to meet someone to save on shipping.
Last edited by RXtreme8; Jan 30, 2010 at 11:01 PM.
just got a 2700 dollar bonus so I may be interested but just not quite sure because after new parts rebuild and an ems that money will be gone and It will sit in my apartment untill I can either install or pay for an install
Thread Starter
The Man
Joined: May 2006
Posts: 57
Likes: 0
From: Tampa Bay Area
I will take trades front and sides of a genuine Mazdaspeed body kit in Velocity Red (no knock offs) or a set of 17x9 Enkei RPF1's (gold-painted preferred).
I'm located in the Indianapolis, IN area and willing to drive a few hours to meet someone to save on shipping.
I'm located in the Indianapolis, IN area and willing to drive a few hours to meet someone to save on shipping.
Thread Starter
The Man
Joined: May 2006
Posts: 57
Likes: 0
From: Tampa Bay Area
Thread
Thread Starter
Forum
Replies
Last Post
Mxttz0r
New Member Forum
34
Jul 5, 2019 03:19 AM
jay_tibo
Series I Aftermarket Performance Modifications
22
Sep 13, 2016 08:10 PM
RicerX1
West For Sale/Wanted
5
Jan 11, 2016 05:59 PM
Touge
Canada Forum
0
Sep 1, 2015 10:47 PM
