Okay, looks like a little furry got hungry...

Anyone got a wiring diagram?

 

Go here:
http://69.108.208.137/ryang/modify/r...8_manuals.html

 

what the hell happened to ur car ? -_-

 

I'm 99% sure it was a squrriel. Ate the wires straight back to the harness. Now theres three little wire nubs.

Thanks very much Go48.

 

Would anyone be able to upload pictures of there 8 of the same place under the hood (near the master cylinder)? Today I am going to be cutting back the harness to see whats what and I would love to have a picture to look at.

Thanks!

 

Rodents strike again. Seen about four threads like this!
Damn sure glad I have a pretty tightly sealed up garage for mine.
I'll try to take a pic, but with this broken heel, I don't get around too much at the moment.
What year is your car?
Go48 provided that good link.........it should eventually show you what you need to know.

 

Its an 04 GT. Looks like i won't need the picture after cutting away more of the harness, It's pretty obvious what goes where. There are three ground wires and the two wires for the brake resouivor (sp?) level.

Now, I do have small crimps. Do I use those or should I solder it and just tape. I have wire of the correct gauges ready (wish I had the same colors too) and everythingelse I need I should have.

 

PS ~ What happen to your heel?

 

I would solder and shrink wrap them(if you have some), if not......I think I'd run down and get heat shrink at a hardware, electrical, or auto place. I ALWAYS feel better with solder and heat shrink. Buy two sizes.......one to fit over each individual wire and then a size that will fit over all together and shrink them up.

 

Looooooong F'ing story.
Here's the short version.
Broke it surfing in early April, three months later on the very day the Doc says it's all better, I stumbled going into the house, smashed it down, and fractured in a different spot.
I might be over this all by Christmas! Argh!

 

That really sucks about your ankle. If it makes you feel any better I was running into the house to get the phone but my cat jumped out in front of me and to make a long story short, looks like I have a broken knuckle and or finger. Going for an x-ray in a bit.

I do have heat shrink so thats what I'll do.

Now for my last hurdle... Do I need a new clip? Or how do I do this? I can definitely work out something that I am reasonably sure won't be a problem, but would prefer input from others.

 

Sorry, i know the pictures are awful.

 

Move the camera away a little bit from the object, and use zoom if you have it. What is that, a connector?