For those who have experience with Volk Ce28N and Advan RS, what offset and dimensions would give me an aggressive look with a good amount of concavity? I am looking for ce28n or rs in 19s.

I'm looking for a staggered setup. I cant find the answer to my questions through the search so hopefully someone can chime in. Thanks in advance guys.

 

As close as you can get to stock. That's a 45 mm off set.

 

really? i thought lower numbers (ie. +35, 30, 22, etc) tend to yield more agressive looks.

 

oh boy.. way to steer him the wrong way.

lower numbers do make for more aggressive (i.e. moves further out)

what do you plan on staggering with? 8.5 and 9.5? here's the overall plan for most people regardless of wheel. (as long as you clear brakes)
+34 on front will fit fine with no rubbing and for the rear it's in the range of +40 unless you roll the fenders. rolling the rears will allow you go to lower up to about +34 as well.
also, rubbing depends on your tire size as well. a lot of us typically go 245/35/19 F and 275/30/19 R, but it does make the front wheel a little larger than the rear. be prepared to sacrafice a lil handling with this staggered set up.

most of the people i've seen here w/ ce28's have gone non-staggered and i believe 8.5 all around. it's your choice.

 

http://www.1010tires.com/WheelOffsetCalculator.asp

beers

 

even better

http://www.rims-n-tires.com/rt_specs.jsp

 

good job..

if only that link would end the stupid..

beers

 

arr ex eight: I think you should post pix of your advans in here.