20B Peripheral Ported
20B Peripheral Ported
Originally Posted by '87 Turbo II
Well this is the 14k redline FC. If you look at the calibration it was idling around 8 or 9 hundred. My car idles at 750 on colder days.
________
LoveAnalSexx
Last edited by Renesis_8; Sep 11, 2011 at 12:55 PM.
Seems I have seen a few other videos of that dyno run with this car also ,damn thing is nice. This one scares me though,,,RX-7 Blown 20b
Don't meen to hijack the thread.
Don't meen to hijack the thread.
Originally Posted by '87 Turbo II
Well this is the 14k redline FC. If you look at the calibration it was idling around 8 or 9 hundred. My car idles at 750 on colder days.
Like I said 14k redline. Look at the way it's calibrated. It is a custom made 16k tach. the first line is at 2,000. That idle looks like it is bouncing just below halfway between the 2 and the 0 i.e. 800 to 900.
Originally Posted by Renesis_8
Does it go to 14k? I doubt it, but damnnn that motor is insane, the shop is about an hour drive from me.
http://forums.streetfire.net/showthr...3864#post63864
http://www.mpsys.ca/MPSv1.htm
Originally Posted by '87 Turbo II
Like I said 14k redline. Look at the way it's calibrated. It is a 16k tach. the first line is at 2,000. That idle looks like it is bouncing just below halfway between the 2 and the 0 i.e. 800 to 900.
-Cody
Originally Posted by CohdeyTakahashi
Correct. I was freaking out too, then noticed the damn redline. But regardless, that's pretty f$^&ing low for a peripheral ported 20b, no?
-Cody
-Cody
Alright then, you win what can I say. the sheer fact that it's still running will have me believe that the custom gauge, although cool and matches stock really well

it may have manufacturing defects becaus eit's a oneoff. I know that's not what this discussion was about, but just notable.
I will give in and say you're right about that though.

it may have manufacturing defects becaus eit's a oneoff. I know that's not what this discussion was about, but just notable.
I will give in and say you're right about that though.



