{ FS } Revi Duct, headlight, shocks & springs, 1 rim, front plate bracket, & + OEM parts.
06-01-2012, 11:42 PM
#1
OEM shocks & springs, front plate bracket, & + OEM parts.
Category: Accessories
Price: $400
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I
Location (US State/Canada/Int): FL
Item Condition: Used
https://www.rx8club.com/se-sale-wanted-141/selling-stuff-also-interested-stuff-233271/
here are the parts i have and their prices
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
OEM shocks with springs and top pieces for rear for simple bolt on installation. less than 48k miles. no leaks at all nothing blown. $100
oem auto-style vfad stand-in tube, good for making extension from revi duct to oem intake box. $15 or free with revi duct.
Sold
oem rim. some scratches and curb. $90shipped Sold
oem halogen (not hid/xenon) headlight. some mild haze, can be fixed with headlight restoration kit. $135 shippedSold
Revi duct. id rather have a AEM intake. dont have the mounting screws for it, but they are available from RB for cheap! (see post #6). $100 shipped! with a intake duct so you can make an extension to your intake boxSold
vfad assembly. $25
heater switches, $15 each or $25 for the pair.
shifter panel, $10 or $30 with switches included
front license plate bracket with screws $20
gas pedal $10
brake pedal $5
prices lowered
Last edited by Ricky SE3P; 07-13-2012 at 10:02 PM.
06-02-2012, 11:47 PM
#3
REW 8 with JDM stuff..
I might buy the duct, I just have a question. Do you know if this works with body kits? If not, can you just tell me how long the drop is from the bottom of the air box connector the top of the ram air vents?? I wanna see if this can reach down to the grill on my Mint Blue front or not
Last edited by J_Ro; 06-02-2012 at 11:57 PM.
06-03-2012, 01:29 AM
#6
Registered
iTrader: (4)
Join Date: Oct 2011
Location: Fort Mill, SC
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Xero,
I had a duct that I also lost/misplaced the mounting hardware for. I contacted RB and these are the part numbers & prices needed for the mounting kit: (Assuming all you have now is the duct alone)
(1) 93522 - $3.75
(2) 93523 - $4.75 ea
(4) 93010 - .35 ea
(1) 91106 - .20
(2) 94008 - .30 ea
=$14.45, and you have to call RB to order this.
Hopefully this passes on some assurance to a potential buyer. When I sold mine, I just sent the buyer the above list.
GLWS
I had a duct that I also lost/misplaced the mounting hardware for. I contacted RB and these are the part numbers & prices needed for the mounting kit: (Assuming all you have now is the duct alone)
(1) 93522 - $3.75
(2) 93523 - $4.75 ea
(4) 93010 - .35 ea
(1) 91106 - .20
(2) 94008 - .30 ea
=$14.45, and you have to call RB to order this.
Hopefully this passes on some assurance to a potential buyer. When I sold mine, I just sent the buyer the above list.
GLWS
Last edited by AwptiK; 06-03-2012 at 01:32 AM.
06-03-2012, 11:08 AM
#8
Xero,
I had a duct that I also lost/misplaced the mounting hardware for. I contacted RB and these are the part numbers & prices needed for the mounting kit: (Assuming all you have now is the duct alone)
(1) 93522 - $3.75
(2) 93523 - $4.75 ea
(4) 93010 - .35 ea
(1) 91106 - .20
(2) 94008 - .30 ea
=$14.45, and you have to call RB to order this.
Hopefully this passes on some assurance to a potential buyer. When I sold mine, I just sent the buyer the above list.
GLWS
I had a duct that I also lost/misplaced the mounting hardware for. I contacted RB and these are the part numbers & prices needed for the mounting kit: (Assuming all you have now is the duct alone)
(1) 93522 - $3.75
(2) 93523 - $4.75 ea
(4) 93010 - .35 ea
(1) 91106 - .20
(2) 94008 - .30 ea
=$14.45, and you have to call RB to order this.
Hopefully this passes on some assurance to a potential buyer. When I sold mine, I just sent the buyer the above list.
GLWS
06-03-2012, 11:57 AM
#11
apparently my memory greatly decieves me... from the bottom of the opening that goes to the intake, to the top of the duct opening, is 5.5 inches. considering though where it sits on the oem bumper to pull air, it should still fit okay in your bumper
06-07-2012, 02:28 PM
#20
Registered User
Join Date: Jul 2011
Location: SW FL
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
I work in naples florida, i live in fort myers.. nearest point could be halfway down aligator alley down i75 on a rest stop..
lmk if your interested in doing that.
google maps says its 125 miles from naples to miami.. we could meet halfway 62 miles to the nearest rest stop.
link from google maps.
https://maps.google.com/maps?saddr=M...a=ls&z=9&via=1