{ FS } WB Winning Blue Authentic MazdaSpeed/MS Bumper
07-20-2010, 10:40 PM
#1
WB Winning Blue Authentic MazdaSpeed/MS Bumper [PRICE DROPPED!]
Category: Exterior - Body Parts
Price: $0
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I
Location (US State/Canada/Int): FL
Item Condition: Used
Facts:
*Mazdaspeed USA will not be bringing in anymore MS Bumper into the USA, I bought the last WB bumper, there are quite a few more primer ones, so you can try your luck. THIS IS YOUR CHANCE.
*Holes were drilled for fog bracket, Grille was cut to fit the foglights.
*Fog Bracket not included.
*CAUTION* Multiple Cracks - see pictures.
see story https://www.rx8club.com/showpost.php...53&postcount=8
*Cracks are not really noticeable unless you look for it. It could also be easy an easy fix for anyone who has a working relationship with their body shop, I don't have one, hence the selling.
*Have no problems fitting or mounting
*WB is a tricky color, you might/might not have paint matching issue, but color is perfect on my car.
Crack 1 - Right Fender, have no problem lining up with the plastic clips.
Paint chipped
Crack 2 - Not really noticeable but would be easy fix.
Crack 3 - Side Marker clip - again, no problem clipping the side markers.
Foglight holes
Lines up with fenderwell
haha when my friend working and me chilling.
It will be sent by the box below the stock bumper.
desmond_dna@hotmail.com or pm me if interested. Thank You for looking at my thread.
also have the stock bumper in the pictures above for sale.
https://www.rx8club.com/rx-8-parts-sale-wanted-44/stock-front-bumper-w-front-air-dam-fog-light-bracket-201492/
and mud guards
https://www.rx8club.com/rx-8-parts-sale-wanted-44/wb-winning-blue-front-mud-guard-flaps-201493/
SOLD!
Last edited by dezau; 09-28-2010 at 07:41 PM.
07-21-2010, 07:31 AM
#2
Turb O'd
iTrader: (1)
Join Date: Feb 2006
Location: Germany
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
I am very interested in this! To be honest though, the price looks a little too steep for how beat up it is, specially for that huge crack in the corner of the headlight area. It's easily visible when installed and I just feel that it would cost to much to repair it to warrant a $700 price tag.
07-21-2010, 11:56 PM
#3
Registered User
iTrader: (1)
Join Date: Apr 2008
Location: PA-Atown
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
im interested also, i had urethane m-1 Mazdaspeed replica which was fitted on my car, i don't know if you'd be interested in taking mine off my hands and coming down in the price some...my car when i purchased it was also called winning blue metallic but is more on the green side....also i have other mazda parts im looking to get rid of if your interested
07-22-2010, 04:10 PM
#7
I am very interested in this! To be honest though, the price looks a little too steep for how beat up it is, specially for that huge crack in the corner of the headlight area. It's easily visible when installed and I just feel that it would cost to much to repair it to warrant a $700 price tag.
im interested also, i had urethane m-1 Mazdaspeed replica which was fitted on my car, i don't know if you'd be interested in taking mine off my hands and coming down in the price some...my car when i purchased it was also called winning blue metallic but is more on the green side....also i have other mazda parts im looking to get rid of if your interested
pmed
lol guys, story!
well you know... there's a set back when you set the car low
hate to see it happened, but hey! i'm taking the blow and i'm learning from it
life sucks
10-12-2010, 07:34 AM
#20
Registered User
iTrader: (1)
Join Date: Apr 2008
Location: PA-Atown
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
hey hows it going?
im just wondering about it saying sold is that for OEM or the mazdaspeed, im interested in the mesh and that black strip that goes accross the front of the bumper where the license plate would go, if you still have that id like to purchase it, thank you very much
im just wondering about it saying sold is that for OEM or the mazdaspeed, im interested in the mesh and that black strip that goes accross the front of the bumper where the license plate would go, if you still have that id like to purchase it, thank you very much
Thread
Thread Starter
Forum
Replies
Last Post
Jst4fun
RX-8 Parts For Sale/Wanted
18
04-17-2021 07:43 AM
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM
