rotoryfan1991

iTrader: (4)

Category: Drivetrain
Price: $6500
Private or Vendor Listing: Private Listing
Location (US State/Canada/Int): KY
Item Condition: Used

If interested feel free to message me with any questions.

This is a COMPLETE swap WITHOUT the REW engine block / Haltech ECU / ID Fuel injectors.

Engine
-Rx8 engine front cover modified to fit the rew block
-Rx8 oil pan cut / welded to fit motor mount
-Rx8Performace stainless motor mount

Ignition
-AEM smart ignition coils x4
-MSD spark plug wires x4

Fuel
-Walbro 485 e85 in tank pump
-modified fuel pump housing
-8 AN nylon braided fuel feed line from tank
-8 AN feed lines to fuel rails
-6 AN return line to stock fuel feed line
-Aeromotive 1000 fuel pressure regulator
-FPR gauge
-Custom fuel rails

Coolant system
-Koyo radiator meant for a skyline
-Custom mount for radiator
-Mishimoto aluminum radiator fan shroud
-Custom aluminum coolant lines
-Custom AN lines to heater core

Turbo setup
-Garrett GT42 turbo T6 large divided housing / Anti surge housing
- AN oil feed and return lines
-Custom fully divided thick Stainless steel turbo manifold
-Twin Precision wastegates
-Greddy Type R blow off valve
-Custom 5" to 4" Stainless steel downpipe with wideband bung
-Custom 4" Stainless steel midpipe
-Vibrant 4" Stainless steel flex section
-Custom aluminum turbo piping
-Vibrant intercooler
-Vibrant / Mishimoto couplers and t bolt clamps
-Wiggins style quick release clamp on throttle body to intake piping
-MAF bung welded onto intake
-Intake air temperature bung welded to intake
- AN PTFE boost vacuum lines / adapters
-Black Turbo blanket
-Turbo intake filter

Custom intake manifold
-1 off intake plenum
-Ross Machine racing velocity stacks
-Ross machine racing 90mm throttle body w/ supra tps adapter and sensor
-Vacuum ports welded to bottom
-Fuel rails mounted to top of runners
-Universal billet aluminum gas pedal
-Custom throttle cable

Misc
-Ac compressor with mounting bracket welded on
-Custom Ac lines to use the Rx8 condenser
-Custom bracket to hold Rx8 Eshaft position sensor
-Custom -10 AN oil lines to both stock oil coolers


Also includes the complete Rx8 engine bay wire harness / fuse box etc that has been modified (this will need some cleaning up cosmetically.

rotoryfan1991

iTrader: (4)

Fuel system / Complete engine bay wire harness / Stainless oil cooler lines / Engine mount / Modified engine front cover not pictured as they are still being removed from the car.

rotoryfan1991

iTrader: (4)

rotoryfan1991

iTrader: (4)

Joe814

iTrader: (1)

rotoryfan1991

iTrader: (4)

Thank you,

Price drop to $7950

COMPLETE 13b rew swap setup ready to bolt in and go.

Price includes everything needed besides engine / ecu / injectors.

rotoryfan1991

iTrader: (4)

Bump

Had some offers but still available.

rotoryfan1991

iTrader: (4)

Still available.

Dropping the price $800!


$7,150 for the complete swap only missing, engine / ecu / injectors.

That is around $10,000 LESS than I have invested in these parts and labor.

comebackqid

iTrader: (13)

Any chance you can sell just the Haltech and fuel/injectors set up? If so whats the price?

rotoryfan1991

iTrader: (4)

Messaged

rotoryfan1991

iTrader: (4)

Price dropped to $6,950

rotoryfan1991

iTrader: (4)

Bump

Another price drop !


$6500

Can include the Haltech ps1000 + wiring if interested in making a deal.

Thanks !

rotoryfan1991

iTrader: (4)

Price drop !

$5999 full swap.

No engine

Ecu / fuel injectors can be added for extra.

rotoryfan1991

iTrader: (4)

SOLD.

Thank you to everyone who was interested in the swap.
Hopefully the new owner will make good use of it !