30! I'm #9 and I don't have mine yet!

 

Blu: this is getting ridiculous!
I have tried to be patient, I have sent you PM's, I have posted on this thread asking you to reply to my PM's, and NOTHING!!


You added my name (Anonymous ) when you updated this thread on 6-3-07 and yet I have heard NOTHING as to the progress of this Group Buy. I have since asked you at least on two different ocassions to refund my money as I have lost all faith in your ability to complete this Group Buy.

Deposit? Deposit for WHAT?! Are you telling me that you put down a deposit SO big for ALL these dampers that you don't have any money left over to refund a few sets?? If so, that's **** poor business management. A purchase order deposit should never be more then 50% of the total purchase so where's the rest of the money ????
I just so happen to have a copy of the Cashier's Check I sent you and it was paid on July 9, 2007.

You're right; at times things do not go as planned but typically in the aftermarket world, people step up and take responsibility for their actions (or lack of) and do what is necessary to remedy the situatoin.

I do not feel I am being unreasonable in my request and I have a feeling I am not the only one here who feels this way.
I am asking that deviate from your prior statement and issue me a refund by the close of business on Friday or I will need to persue other means of recovering my funds.


Jedi54


How many people have ACTUALLY received their dampers?? Please place an update next to your name so we can see where this group buy stands. (since blu isn't saying much)


2. zephir (Paid in full) SHIPPED
3. moRotorMotor ( Paid in full) SHIPPED
4. VarneyMazdapm'd
5. looking4(Paid in full) came in late to the group buy
6. maxxdamigz (Powder coated black, Paid in Full) will ship
7. Rotary Wolverine (paid in full) SHIPPED
8. dbullock (Powder coat in black) (Paid in Full) will ship
9. Mazurfer(Black Powder coat)(Paid in Full) will ship Nothing received
10. avenger (Powder coat black, paid in full) will ship
11. arr ex eight pm'd
12. genjuromikos(paid in full) SHIPPED
13. colin204 (Powder Coated black, paid in full) will ship
14. dannobre (Paid in full) DROPPED OFF AT MAZSPORT
15. Habinero (paid in full)
16. Renwar1 (Paid in full)
17. DrewMan (Paid in full)
18. slavearm (Paid in Full)
19. Im_DANomite (paid in full)
20. BLACKOUT pm'd
21. Anonymous.....??????? LOL(Painting it black, mail check recieved) Still Waiting on mine
22. Citzen (paid in full)
23. LabDad (Mail check recieved) SHIPPED
24. LabDad will ship (there was an agreement made prior to his order being placed)
25. LabDad will ship

I told you I had more.....

26. rx8speeddmon
27. MazdaJeffpm'd
28. Cavalier(paid)
29. GW-8 (Powder Coated Black) Mail Check recieved
30. MidLife8 (Powder Coated Black) (Paid)
31. boanjangnararmine(Paid)

 

Wow
This has been really long. Any updates or are we to assume this is a lost cause group buy? Just pop your head in and give us an update.

 

*Pops head in*

BTW I am not a business Jedi54...

I am shipping dampers today.....I will PM tracking numbers shortly

 

I updated the list on the first page as to who is gettting the dampers.....

I am recieveing all of everyones pms......I am not responding to any new orders until I can get more dampers to ship to people.

 

Not sure how that changes anything Blu.

When are you expecting your next batch of dampers to arrive?

 

Blu, I still do not have a refund. Please contact me about a refund within the next few days.

IF you continue to ignore my request then at least have the courtesy to follow my 2nd requst.

If or when you receive my dampers... DO NOT PAINT them. I paid for paint, keep it.

 

where are the tracking #'s and have the dampners shipped???????????????/

 

I don't know...............mine finally said shipped early last week and so far, no tracking ID and no dampers!

 

Tracking VIA USPS:

Dan Bullock: 03070020000382182442
Thura Htein: 03070020000382182435
Samuel Turner: 03070020000382182428
Colin Chapman: 03070020000382182411
Christopher Wall: 03070020000382182404

It was my birthday this past weekend and I was out of town

 

happy birthday blu.
Can you please confirm that you read my post about refund or not painting the dampers. I honestly don't mean to be a bother to you, I just want to make sure that at the end of this GB that I just get what I want. (refund OR unpainted dampers)

 

Don't worry Master Jedi.......

The force is with you.

The dampers have not been lost to the dark side.

 

LOL.....

Jedi I can do that for you but why unpainted?

 

Thank you sir!

 

they'll stand out a bit more and match my ugly green S-techs.

 

See your PM's as my blacks came in on Tuesday or Wednesday, but the site has been down.

 

Got my set. Painted, well packed, and undamaged on first inspection. Certainly glad I don't have to check this thread anymore.

I win!!

 

Installed my painted black ones this morning and all is good. Was mildly concerned what the paint job would look like, but am fully satisfied.

Couple of notes and comments: See the pics as well.

1.) I would recommend assembling the dampers the night before and letting the thread glue(loctite or whatever) have a chance to dry. I did that assembly and then just let them sit in the foam protectors all night.

2.) Don't throw away those foam protectors around the dampers either , as I used them to wedge between the hood and the windshield area just for protection in case I had trouble and got tired of holding one side of the hood with one hand while undoing the bolts for the hood bracket, sliding that bracket in(make sure you put it between the hood and the stock bracket....see pics), and putting the bolts back in. It's a piece of cake, but better safe than sorry.

3.) I was afraid that there would be a pretty big gap from fender to the hood after install, but to my surprise it's really not that bad. You can make some very minor tweaks for alignment after you are done, so you might not want to torque them all the way down on the hood side . See pics, but look at your gap real close even before you start, so you will get a good idea of how much it changes without having to measure it.

4.) Total time for install was less than 20 minutes for sure. Oh........don't forget to take out the stock hood prop bar if you like. Just pry out the black plastic piece on the drivers side like any other plastic retainer.

5.) Digital cameras are great, easy to take a bunch and then just delete!! I know it's a lot of pics between this thread and the next, but everyone likes different angles and pics also help to make a decision on whether to do it or not. Sorry for the lighting, but it was early in the garage this morning.

If I think of anything else, I'll edit this thread, but it's a pretty easy install. Oh.......damn those torque spec's aren't very much!


Already thought of something.......I haven't cut my hood gasket yet, I just unclipped it at the last clip and kinda folded it into the engine bay for now. Might cut it later and am also looking at that piece were the last clip is on the gasket........trying to see if that's what creates the small gap or not. That end of the damper may touch there first??????

 

2nd set of pics
Make sure you put the bracket inbetween like in photo #1. I know that it's a no brainer, but............you'd be surprised how many won't read the directions!
I know the gap looks big in the 3rd and 4th photos, but it's really not. I'll go out and measure it soon.

 

I've had mine installed last week and I do agree with your assessment, Mazurfer. Definitely assemble the dampers the night before to let the thread lock set. I don't know about anyone else, but I had a hell of a time trying to find the right size socket for the hood bolts. 13mm was too loose and 12mm didn't fit!. I ended up using the 13mmm socket but being very careful. Overall I am very satisfied. I didn't cut the hood gasket as per the instruction manual. With the hood closed, it does bulge up 1-2mm towards the windshield but I'm sure that is from me not removing the obstruction of the gasket and the damper body. I'm willing to live with that.

 

Hmmmmmmmmm..........my 12mm fit fine, and I didn't cut my gasket either(yet), but I did undo the last clip and fold it back into the engine bay....for now. You can see that in a couple of the oics.

 

Glad to see everyone is happy again

Now for the rest of the dampers.....

 

Blu: I need to buy you for another favor; lets go back to painting my set if you can.
Looking at Mazsurfer's set, the paint looks great and I'm starting to like the Tein green less and less. I apologize for changing my mind again.

Let me know if this will be an issue,
Jedi

 

No problem...


TO ALL THE ARE STILL INTERESTED I GET YOUR PMS I AM NOT TAKING ANY NEW ORDERS UNTIL I KNOW I CAN SECURE PRODUCT THANKS

 

when will these be available again?