R3 Lowered with 20mm Spacers
3 Attachment(s)
Here are some pics of my car with tanabe gf210 springs and ICHIBA v2 20mm spacers
|
4 Attachment(s)
After
|
Fisher, love the look with the spacers,really pushes the tire out nice.
and what maybe a 1 1/4 drope with spring |
the web site says 1.4/1.2 f/r
|
how much $$$$ for both springs and spacers and did it change the ride much, you need some oil cooler screens
|
ride is maybe alittle harder i would say close to the r3 stock.
for price about 250 for the springs and about 250 for the spacers. ya i should look in to those screens |
i just got tanabe gf210 springs installed too lol
I have ichiba spacers too. Question... does your front seem a little bit higher than your rear ?? I just got my springs installed like a week ago and i just recently got them preloaded but my fronts are stiill a tiny bit higher than my rear. |
any trouble installing springs on stock r3 shocks?? read alot of stuff about the rear sitting to high on some occasion
|
none at all it went very smooth ill take a side shot of the car so u can see the stance
|
the rear does seem to squat a little but now with the spaces its not as noticable
|
1 Attachment(s)
side view
|
Your 8 looks good Fisher! I think that's how the R3's should come stock!
I have a pair of ichiba's too. Good product, but i recommend using beefier acorn nuts when mounting them. I didn't trust the tiny ones they came with & they are easy to strip haha. |
Can you post some pics of that front lip too?
|
hehe ya the lug nuts well those a cheap openended ones the place i got the spaces from sent 1 set with longer studs so i couldnt use oem lugs i am getting new ones tomorrow ill take a pic with the new lugs.
Sure ill get some more pics of the lip up |
I'm more interested in that front lip. Got any better pictures of it?
EDIT: is it the Odula lip? EDIT2: yup, it is. I know what my next purchase is. |
Looks great! Off topic I know but what exhaust are you running?
|
its a trust/ greddy u can only order it from japan, greddy usa says they still need to make it / fit it to the North american market ... looks like its made and fits to me :)
fyi i got it through japanparts nothing but good things to say about them |
Rotaryrx8,
I told u! Cut the front ones by one coil. I promise that it will lower the front by only about 1/4 inch and make it lower than the front. It wont change the ride or the dynamics of the springs.
Originally Posted by Rotary-RX8
(Post 4254467)
i just got tanabe gf210 springs installed too lol
I have ichiba spacers too. Question... does your front seem a little bit higher than your rear ?? I just got my springs installed like a week ago and i just recently got them preloaded but my fronts are stiill a tiny bit higher than my rear. |
Originally Posted by whiterx8man
(Post 4305574)
Rotaryrx8,
I told u! Cut the front ones by one coil. I promise that it will lower the front by only about 1/4 inch and make it lower than the front. It wont change the ride or the dynamics of the springs. Also, don't hi-jack this QUALITY thread with your ricer fail. The OP is doing things the correct way. |
Could you go with bigger spacers? Do you think the Ichiba 22mm spacers work for the rears without rolling the fenders?
|
Originally Posted by fisher
(Post 4255399)
side view
|
it looks like 22mm should fit no problem i kinda wish i got the bigger ones :)
and ill get some pic this week of the fron lip up ... got to wash the car heheh |
Originally Posted by Fisher
(Post 4313986)
it looks like 22mm should fit no problem i kinda wish i got the bigger ones :)
and ill get some pic this week of the fron lip up ... got to wash the car heheh |
Really liking that lip...too bad it only fits the R3 bumper :( ... they need to make a solid lip for the non-r3s
|
Originally Posted by paimon.soror
(Post 4314571)
Really liking that lip...too bad it only fits the R3 bumper :( ... they need to make a solid lip for the non-r3s
Fisher - can I steal that SBM front bumper? hahaha....you Canadians got lucky, since you got that color on the R3s! IIRC, you got white R3s as well, right? She's looking good. Any plans for aftermarket wheels, or are you just going to keep the BBSs long term? |
All times are GMT -5. The time now is 08:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands