Power drops at 6500-7000 and comes back
So when I take my car, 09, to redline WOT it has good pull and power till about 6500 and then it seems to plateau for just a little bit then the power comes back. From what I searched and read it could be plugs maybe but seems those impacted the whole upper and or lower range. Car has 16K on it. Its not critical but thought I would ask. I am sorry if this has been covered a bunch and please point it out if it already is. Not really sure what to search...
|
Oops. I found it.
https://www.rx8club.com/showthread.p...ght=loss+power Seems that it is most likely ignition related. I will research it. I know fold said 20K is the life and I am close, plus I have no idea what kind of driver had it the first 15K. After more reading, gonna check the ignition, cat, and I noticed the battery had some corrosion dust so will clean that up too. I will report my finding in case someone uses this thread one day. |
mine drives like a dream at 20k.
|
Well, I did an ECU reset and that seems to have fixed it! Has more power now than ever. Maybe just needed that after the cat back and intake change. Running like a champ now.
|
Don't always assume that a Series I fix will apply to an S2...it is a mistake to do so.
Any high RPM breakdown is usually and always Spark Plug related first.,,sticking SSV second. I am convinced so many have renewed coils and plugs together when it was only necessary (in some cases) to renew spark plugs only. Please fill out your Signature.. https://www.rx8club.com/series-ii-technical-trouble-shooting-160/%2A%2Astop%2A%2A-please-read-before-posting-what-series-ii-rx-8-a-221326/ |
Yeah I will followup on the plugs. Thanks for the help.
|
it can just as easily be fuel too; fuel pump, fuel pump high speed relay, injectors
9 out of 10 times people here are simply guessing at a misdiagnosis and swapping parts needlessly, so take most of it with a bag of salt |
Originally Posted by nohc
(Post 4080883)
Yeah I will followup on the plugs. Thanks for the help. Kinda blunt on the whole signature thing there buddy but sure if I get around to it.. Thanks
Any internet forum can only advise, correct diagnosis is not always easy, IMO it is always easier to start looking at what is common rather what could be a remote or less known issue, in so many things it is better and easier to start at the source (ignition) and work back...Yes it "could" be Fuel Pump related, however, I seriously doubt that as the FP in S2's is a later improved generation and is not know to give any issues for S2's like in Series 1's...it is only <3 years old. |
I had edited my post right after. No worries. I am still getting use to the culture here.
|
Also didn't realize why the signature was important until I read other peoples and makes sense. Thanks for the help and suggestions on this. It seems to be fixed for now but I will reference this in the future if needed.
|
Is there a different path the intake air could be by passed, I have always got that same feeling around that rpm, and it feels like a kind of ajustement the engine makes to be able to reach the higher rpm range
|
No.
Its called your SSV actuator opening up....might be a bit slow? I had mine stick, once, for a split second, that was an extremely humid day...plus heat. I don't think S2's will be immune from being cleaned (the SSV)...at some stage of their life. |
Originally Posted by ASH8
(Post 4081943)
No.
Its called your SSV actuator opening up....might be a bit slow? I had mine stick, once, for a split second, that was an extremely humid day...plus heat. I don't think S2's will be immune from being cleaned (the SSV)...at some stage of their life. So, any easy way to clean that? I'd noticed that on my dyno and have been looking change that to a smooth line. If I could get rid of the drop I have a 6200, I'd be feeling much better. Heck, could we just "stick" the SSV open? :D I read that one of the turbo kits opens the valave at 500RPM on an S1. Would that work for us? |
Check this out from Jon...he posts EXCELLENT DIY Videos...
Knows more about them than I.. Intake Manifolds are not exactly the same in S2's BUT, all the basics are with some slight changes. https://www.rx8club.com/series-i-do-yourself-forum-73/diy-remove-ssv-beta-teaser-video-184663/ |
My engine has always plateaued a bit around 6500-7000rpm. It feels like it's about to run out of air, and then it doesn't. My understanding is this lag is caused by waiting for the third set of intake ports to open.
|
All times are GMT -5. The time now is 05:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands