RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series II Technical and Trouble shooting (https://www.rx8club.com/series-ii-technical-trouble-shooting-160/)
-   -   Cel p0411 (https://www.rx8club.com/series-ii-technical-trouble-shooting-160/cel-p0411-210605/)

RogueTadhg 01-19-2011 06:41 AM

Cel p0411
 
Per the 2009 workshop manual: "Secondary air injection system incorrect upstream flow"

I have not done any intake/exhaust modifications to the car. The only modifications I've done is to add lights.

All lights still work - so there's not a fuse popped.

What else do you think could cause the problem - because being an actual problem.

Edit:
A piece of the puzzle, the CEL popped up on the morning that South Carolina has it's ice storm. I'll take her in sometime soon.

The main reason why I made this post is because another thread (Yes, I searched :) ) mentioned the same CEL error was caused by blue tape. I was hoping there would be another off the wall reason.

jrx13 01-19-2011 08:44 AM

I would start by checking all the connectors to the air pump.

Also you can leave the hood open, start the vehicle cold and listen/feel the air pump. It should stay on for like 30 secs or so.

RogueTadhg 02-14-2011 04:02 PM

Air pump was replaced.

BlackRX8GT 05-21-2011 05:03 AM

what if air pump wasnt replaced and the guy before you suppose ofly added aftermarket headers will that affect anything


All times are GMT -5. The time now is 04:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands