Turbo kit greddy with haltech??? recommendation
1 Attachment(s)
I have mazda Rx8 R3. 2009. Greddy turbo kit
I need some help and recommendation. I'll use Haltech and I have no problem with this. I I'm considering changing the cold side of the original turbo greddy, injectors and walbro fuel pump. I have full exhaust and I am thinking about 9 pounds. Any recommendations or any changes I have to do? what size injectors do you recommend and brand that is plug and play? With my combination and 9 pounds touches the 300? http://i804.photobucket.com/albums/y...5b55f679b0.jpg Attachment 223919 Representando desde la isla del encanto Puerto Rico. |
Originally Posted by gamaliel31
(Post 4540761)
I'll use Haltech and I have no problem with this.
I have used most tuning solutions for the 8 (not the Haltec however) Have never heard of anyone having success with Haltech . I have however, heard of many people who have had success (Series 1) with either Cobb AP or Mazdaedit.
Originally Posted by gamaliel31
(Post 4540761)
I I'm considering changing the cold side of the original turbo greddy.
To4e 57 trim To4e 60 trim Greddy 20g
Originally Posted by gamaliel31
(Post 4540761)
Any recommendations or any changes I have to do? .
Originally Posted by gamaliel31
(Post 4540761)
what size injectors do you recommend and brand that is plug and play? With my combination and 9 pounds touches the 300? . You will need around 10psi at 7500rpm to make 300whp with the greddy kit . The wheels above will fall just short of this . |
keep in mind the OP is asking about boosting an S2.
|
Originally Posted by paimon.soror
(Post 4540930)
keep in mind the OP is asking about boosting an S2.
Will edit my response . Edit Ummmmm - did someone move this thread into S2 or am i going loopy ? |
The only person I know of to try the Haltech was dannobre. And IIRC, it was unsuccessful even after working with Haltech to try and resolve the issues.
For injectors, the S2 injector setup should suffice but you will have to wait and see as this has not been done yet AFAIK. |
Put down the drink!
lol jk, yea i think it was just moved |
Originally Posted by Brettus
(Post 4540931)
Ummmmm - did someone move this thread into S2 or am i going loopy ?
|
Originally Posted by 9krpmrx8
(Post 4540942)
The only person I know of to try the Haltech was dannobre. And IIRC, it was unsuccessful even after working with Haltech to try and resolve the issues.
For injectors, the S2 injector setup should suffice but you will have to wait and see as this has not been done yet AFAIK. |
Originally Posted by RIWWP
(Post 4540945)
You are loopy.... :suspect:
I si no te gusta brega con esa pa. Puerto Rico los duros en rotores. |
1 Attachment(s)
Originally Posted by Brettus
(Post 4540922)
No -one has fitted a greddy kit to a S2 to my knowledge so you are in uncharted territory.
I have used most tuning solutions for the 8 (not the Haltec however) Have never heard of anyone having success with Haltech . I have however, heard of many people who have had success (Series 1) with either Cobb AP or Mazdaedit. Yes , do this . Suggest one of the following or anything else of same size/flow that fits . To4e 57 trim To4e 60 trim Greddy 20g Too many to list here - read the Greddy fixes thread and as many Greddy FI install threads as you can. ID1000s secondaries would be a good bet . But as no-one has done this before can't be sure about that. You will need around 10psi at 7500rpm to make 300whp with the greddy kit . The wheels above will fall just short of this . Attachment 223915 |
What about MazdaEdit?
|
Originally Posted by gamaliel31
(Post 4541217)
Thanks for the information. But no offense edit mazda cobb and I do not like at all and the cobb S2 does not work. In my case I have 2 options Haltech or FuelTech.
] |
Well it's good that we have someone else trying other options.
I encourage the attempt .. good luck and keep us updated please. |
from what I been researching adaptronic stand alone is the way to go in the s2 rx8
|
Yeah, so long as there is no involvement from Turdblown.
|
Originally Posted by J6speed
(Post 4541396)
from what I been researching adaptronic stand alone is the way to go in the s2 rx8
Post your reference material please |
Of course, keep you posted and send pictures of the process
|
2 Attachment(s)
[QUOTE=Brettus;4541341]Mazdaedit will work for sure - PM me if you can't make the Haltech work properly.[/QUOTE
I made a mistake when typing. True mazda edit works well. Excuse is that English is not my primary language.: Dubs: Puerto Rico los Duros en Rotores. Puerto Rico does it better. Attachment 223891 Attachment 223892 |
Too clean for words ^^
I'll just say.... Wow |
Originally Posted by J6speed
(Post 4541396)
from what I been researching adaptronic stand alone is the way to go in the s2 rx8
|
no not at all from A shop around my area called Rotarywerks.(MIAMI) well know most of the guys from are Facebook group MI8CREW go there to get rebuilds and stuff so i asked him about tuning my s2 he said he has tuned only one S2 before and it's running adaptronic and that would be the only way to go for now,
|
This guy is running microtech LT10 |
All times are GMT -5. The time now is 03:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands