RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series II Exterior Appearance and Body Kits (https://www.rx8club.com/series-ii-exterior-appearance-body-kits-166/)
-   -   RX8 Hood (https://www.rx8club.com/series-ii-exterior-appearance-body-kits-166/rx8-hood-230585/)

ErickDR 03-16-2012 12:53 AM

RX8 Hood
 
hi guys, i tried some search but i couldnt find it...even went to my Mazda dealership and they didnt knew...
My question is: do the series 1 hoods (Aftermarket Carbon fiber ones) would fit on the S2??
im about to build my rx8 for some local Car Shows (just for fun) and ppl over here really likes CF (dont ask why)
thanks guys

MinHoSII 03-16-2012 02:02 AM

S1 aftermarket hoods fit S2 :icon_tup: Just keep in mind you generally get what you pay for.

EightCostsMoney 03-16-2012 06:47 AM

+1000 on that! I learned that the hard way with a hood I got for my old 350Z. The biggest mistake I ever made was to buy a cheap hood. It cost me a arm and leg to get it to fit and it still never looked right.


Originally Posted by MinHoSII (Post 4213874)
S1 aftermarket hoods fit S2 :icon_tup: Just keep in mind you generally get what you pay for.


ErickDR 03-19-2012 11:17 PM

thanks a lot guys, that's great to know...the idea im thinking is this one: mazdatrix rear bumper (already installed), mazdatrix side skirts, R3 front bumper with large spoiler or buying a carbon lip from japan (need help to decide that one) and a carbon hood, already have my rims painted in hyper black and my car is white ... thanks for any opinion and help about this

Rx strength 03-26-2012 06:31 PM

Carbon fiber hood and spoiler
 
4 Attachment(s)
I am very pleased with my Seibon hood and spoiler. The fitment is great. The hood was able to use original hardware and needs no hood pins. It closes very solidly and looks great. Just don't purchase through Illstreet customs out of South Carolina-lousy customer service.

paimon.soror 03-26-2012 06:46 PM

dude no offense, but that spoiler is hairy ass ugly

Rx strength 03-26-2012 07:07 PM

Ugly
 
3 Attachment(s)
Seriously? Anybody else got an opinion? I think the stock ones are just too small and plain. I've had many compliments. How about a side angle view?

LifeAfterRx8 03-26-2012 07:09 PM


Originally Posted by Rx strength (Post 4222271)
Seriously? Anybody else got an opinion? I think the stock ones are just too small and plain. I've had many compliments. How about a side angle view?

It looks as if you super glued an ironing board to the back of your trunk.

Prophet 03-26-2012 07:33 PM


Originally Posted by Rx strength (Post 4222271)
Seriously? Anybody else got an opinion? I think the stock ones are just too small and plain. I've had many compliments. How about a side angle view?

It's looks like crap. Hood is nice but the wing is awful.

Rx strength 03-26-2012 07:38 PM

What type of spoiler do you like?

godesshunter 03-26-2012 08:15 PM


Originally Posted by Rx strength (Post 4222271)
Seriously? Anybody else got an opinion? I think the stock ones are just too small and plain. I've had many compliments. How about a side angle view?

The fact that its carbon fiber is cool but the appeal ends there.

You may be able to pull it off if the rest of the car complimented it. You need to get moar low and a sharp wheel tire combination at the very least to start.

And for Gods sake lose the pin stripe!

Rx strength 03-26-2012 08:35 PM

1 Attachment(s)
Yeah, I hate the pinstripe. The bad part is, when I bought it, they charged me $175 extra for it. I told them to go ahead and remove it. I would appreciate any advice on removing the pinstripe. I also would like to go to black wheels, but I'll probably wait until I need the tires replaced. As far as the spoiler, I like it and that's the only thing that counts. After getting these replies, I did some searching and found a couple of cars with the same spoiler. They both got love it or hate it comments. I also noticed that the consensus on this forum seems to be that spoilers are pretty much bad in general with a lot of people saying either it's not really functional or it makes it look like a teenager's riced-up Honda. My opinion is that the back end is rather plain and abbreviated needing something to balance it out. I also got mine right after seeing the 2011 Rolex 24 at Daytona and really loved the class winning Rx8. Besides, now I know I can touch up the wrinkles in my shirt when I get to work. How much starch do you want in your collar.

Rx strength 03-26-2012 08:42 PM

I looked at your pictures and see that you are a small spoiler guy. What I do like, though, is those sort of half side skirts. I guess that was your old car. Would you please give me some information on those? I'm addressing LifeAfterRx8.

mistahjg 04-12-2012 02:16 AM


Originally Posted by LifeAfterRx8 (Post 4222272)
It looks as if you super glued an ironing board to the back of your trunk.


^^^^ :rofl: bro dont tease the guys decision making,

my opinion would be like, i wouldn't put that wing on my 8,
not something i would spend time on anyway. n if i saw your car in person
i would glance at it, and then move on with my life.

your money,your car, your decision, if it makes you happy then a + 4-u


http://www.flickr.com/photos/77117762@N08/6920952236/http://www.flickr.com/photos/77117762@N08/6920952236/ by http://www.flickr.com/people/77117762@N08/, on Flickr

J2daG1990 02-18-2015 09:49 AM

The best CF wing I have seen fitted to an RX8 is in my opinion the Carbon Fibre Universal GT 57" ones you get off of eBay.

Cheaper than the premium brands but looks the bol*ocks.

Your one looks a bit sh*t because the design is just a straight line and it doesn't suit the curvature of the bumper...

9krpmrx8 02-18-2015 02:04 PM

Nice 3 year bump.

J2daG1990 03-02-2015 05:08 AM


Originally Posted by 9krpmrx8 (Post 4665485)
Nice 3 year bump.

Sorry I'm fairly new, not a lot of posting has been happening lately since last year, lets pick it back up again!

( I did get a warning for it... lol)


All times are GMT -5. The time now is 09:10 AM.


© 2024 MH Sub I, LLC dba Internet Brands