RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series II Exterior Appearance and Body Kits (https://www.rx8club.com/series-ii-exterior-appearance-body-kits-166/)
-   -   Mazda Part Number Help and Information..here... (https://www.rx8club.com/series-ii-exterior-appearance-body-kits-166/mazda-part-number-help-information-here-224753/)

ASH8 10-26-2011 10:12 PM

Mazda Part Number Help and Information..here...
 
Mazda OEM Spare Parts information is available here... right here... right now... in the form for Genuine MAZDA Part Numbers and or Diagrams Pictures showing Mazda Spare Parts pertaining to that area of your inquiry.

Whatever Series RX-8 you own..or any other Mazda

A "Parts Diagram" is also available to help if you are reassembling something you have dismantled and or are not sure how it all goes back.

I can now "search and interpret" all Mazda models for the USA, Canada, Australian, and UK/Europe markets..

To ensure 101% accuracy please post your VIN Number, or post what your Spare Part request is here in this thread or
separately PM me your VIN Number if you do not want to disclose VIN # here in this thread.


The VIN # is usually located on your cars Bulk Head or Fire Wall or in the front pages of your Service Handbook.

Depending on your Region (country) it will look like the following EXAMPLES..

JM1FE1C45A0404332 (North America or Canada)
JMOFE103290301052(Australia)
JMZSE103180200332 (Europe)
JM6FE103110100332 (General Market)
JM7FE103100100332 (General Market)

With your VIN number you and I can be 100% sure of the correct Paint Color or Trim Combination or Transmission and or features
..like Stereo's, with or without Spoiler or Sunroof or correct Suspension or Brake details , etc, etc

Please keep in mind that I am in Australia and there could be a slight delay, however I try to check out the club site daily.

BTW:::The Side (Left Hand or Right Hand Side) of any car (either Left- LHD or Right Hand Drive - RHD)
is determined as you sit in your car, left is left, right is right.
NOT as you are looking at your car from the outside.


MAZDA PARTS MATCHING
Sometimes when you are repairing your car you may lose a Nut, break a Bolt or Stud, or lose a Screw or a Clip??.
Let me know and I can tell you where you may find the same part you need from somewhere else in your car that is perhaps not so important.
At least you can get your car back on the road while you wait for a new replacement to arrive.


I can also tell you if the Part you are looking for can't be purchased new but may be used in another MAZDA model from a Junk Yard or Car Wrecker.

ALSO.. If you have any old Mazda Parts with Part Numbers attached I can tell you exactly what model Mazda's they are designed for
from 1970 on-wards, all I need is the Mazda Part Number.


Every Mazda Part and Part Number ever made can tell you the history and model use of said individual OEM Spare Parts.
Every OE Mazda Part and Mazda Special Tool PART NUMBER is dissected into three sections.
1. The actual Model Number (code) of the original Mazda this Spare Part was made for (FIRST ALL NEW MAZDA MODEL USED IN) (4 Numbers/Letters).
2. The actual Vehicle LOCATION of the said part and where it is located or installed (2 Numbers).
3. The actual Part Number of the said part (4 Numbers/Letters).

Three Examples..

N3R1-18-541 Oil Pressure Switch
N3R1 - is for 2009 Series 2 RX-8 - 18 is Location of Engine Electrical - 541 is the actual Part Number.

0839-52-310B Bumper Bar Centre Rear.
0839 - is from 1971 RX-2 Capella - 52 is Location of Body Panels - 310B is the actual Part Number.

49-F042-001 Wrench, Fuel Pump
49 - is Mazda Special Tools - F042 is from 2003 RX-8 Series 1 - 001 - is tool Part Number.


SO WHAT DO I NEED FROM YOU..

1.VIN NUMBER..and Year of RX-8...
2.THE 'PART' YOU REQUIRE AND sometimes IT'S LOCATION... IS IT ON THE LEFT OR RIGHT SIDE OF CAR?...'see above in RED'
3.A REPLY FROM YOU FOR ANY OTHER RELEVANT INFORMATION CONCERNING THE PART INFO YOU WANT FROM ME...


TO TRY AND KEEP THIS THREAD CONCISE WITHOUT UNRELATED COMMENT IF YOU WISH TO 'SUBSCRIBE' USE THE
"Thread Tools" LOCATED ON THE TOP RIGHT CORNER OF THIS THREAD..Please.

I recommend purchasing your OEM parts from RX-8 Club forum Vendors like Mazmart and or our forum on-line Advertisers.

PLEASE BE AWARE: DO NOT REQUEST HELP OR PART NUMBERS IF THE INFO IS ALREADY
COLLATED WITHIN THIS THREAD.... SO READ IT BEFORE YOU MAKE CONTACT WITH ME


ooooooooooooooooooooooooooooooooooooooOOOooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooo

THE USE OF NON GENUINE MAZDA PARTS...


Please be very careful on what renewable and non genuine replacement car Parts you install or have installed in your Mazda.

40+ years ago I used to think that I could not see much or any difference between genuine and cloned or replicated new parts, or the so called better engineered 'performance' or copied Mazda Parts as being a money saver for car owners as they were a 1/4 of the price than from a new car Mazda Dealer 'Spare Parts Department".

Well a WARNING, most are not better, in fact they are inferior and poorly made where you can not see The inside. And or down right dangerous.

A few recent reminders...

1. eBay RX-8 Ignition Coils (for Spark Plugs) while they look 99.5% OEM and original, they simply are not, they are inferior and a cheap knock off which will not last and in actual fact puts your CAT and Engines reliability at risk, many of these cheap Coils last only a few hundred miles.

2. Cloned 'Clock Springs', these are a multi-tasking module directly behind your Steering Wheel, it's purpose is for electrical supply to Steering Wheel push buttons, audio, indicators and most importantly Air Bag power supply and ignition in case of deployment.
Currently in 2015 Toyota Australia are trying to locate many of these installed cheap knock offs and will sue those sellers who are putting Toyota's reputation at risk and also severely compromising the safety of the owner driver.

It is just not worth the risk to you, your family or other road users.

Ash

ASH8 10-26-2011 10:16 PM

1 Attachment(s)
Example...


What is the part number for a new Series II Oil Filter and new Coolant Tank for my 2009 RX-8.

JM0FE103290300456
N3R1-14-302 Oil Filter
N3H1-15-350M Coolant Tank Assembly

https://www.rx8club.com/attachment.p...1&d=1320051128

godesshunter 12-02-2011 09:27 PM

Interior door handle part number
 
Does anybody know the OEM mazda part numbers for the interior door handles? I have a crazy idea to do with them but ill delve into that later. Thanks

ASH8 12-03-2011 02:55 AM


Originally Posted by godesshunter (Post 4137002)
Does anybody know the OEM mazda part numbers for the interior door handles? I have a crazy idea to do with them but ill delve into that later. Thanks

F151-58-330C02 Right Inner Door Handle $112.00 USD
F151-59-330C02 Left

This is the metal pull part, lock knob and black steel backing plate (not seen).
Black plastic finisher or escutcheon is separate again.

godesshunter 12-04-2011 03:47 PM

Perfect. Thanks.

bhammer 12-27-2011 12:11 PM

Alternator - Series II
 
Does anyone have the part number for the Series II alternator? I am researching with a company on a high output alternator.

ASH8 12-28-2011 03:18 AM


Originally Posted by bhammer (Post 4151817)
does anyone have the part number for the series ii alternator? I am researching with a company on a high output alternator.

Here ...
N3R1-18-300

bhammer 12-28-2011 11:39 AM


Originally Posted by ASH8 (Post 4152285)
Here ...
N3R1-18-300


Thank you Ash!!!

mazdaspeed306 02-05-2012 03:26 PM

R3 bumper and sides mazda #?
 
Hey does anyone know the mazda part number for the R3 front bumper and side skirts, i've tried searching and cant come up with a number, the reason why i'm asking is because I've phoned 3 mazda dealers and and they all say they need the vin number, 2 of them didn't even know what a R3 rx8 was and the 1 that remotely kinda knew what it was said there was 26 different options :banghead: I am wanting to put the front and sides on my 09 GT thats why i'm asking. Thanks

ASH8 02-05-2012 03:43 PM

Give me a moment and I will give you some numbers..

DEALER part guys (some) don't use the term R3 as it is not listed ANYWHERE in ANY Mazda EPC...

It is With Side Spoilers LARGE..

ASH8 02-05-2012 04:02 PM

And YES..a VIN Number will confirm showing up to 6 different (R3) front Bumper covers with or without headlamp cleaners....

Supply a VIN and I can confirm exact Part Numbers..

Used up to June 1st 2009..
F1Y7-50-03XAAA Front Bumper (Primed NOT Painted).

Side Step Skirts "Spoiler Large" and ARE colour Coded (painted)
F197-51-P40A85 Right (85 Crystal White Pearl)
F197-51-P50A85 Left (85 Crystal White Pearl)

AGAIN your VIN will confirm Colour...I am not listing every colour...Please read OP in this thread. :)

mazdaspeed306 02-05-2012 04:05 PM

I'm not sure didn't even know there were options for large or small, i knew there were options on with or without headlight washers, because i wanted to get rid of that anyways.

550rwhrex 02-13-2012 10:49 AM

I'm looking a Mazda motorsports and don't see the side skirts

bhammer 02-13-2012 12:46 PM

Ash, I'm looking for the part number for the trim peice that covers the access to the parking brake adjustment nut. Don't know if it comes in different colors but I need black. For a visual, on a US model, it is the part that is in the forward right corner of the cup warmer.

Some how, during my upgrade, I lost the part. It probably got swept up by accident.

ASH8 02-13-2012 02:58 PM

1 Attachment(s)
F151-55-721A Cover Hole

https://www.rx8club.com/attachment.p...1&d=1329166692

eoph 05-07-2012 03:52 PM

R3 Fog Lamp Assembly
 
So the fog light lense on the right side is cracked open from a rock, and i was looking at mazda-parts.com for a replacement. But I've noticed they have 2 options for it, being the same price for 290.xx, with one having the description LAMP(R)-F.FOG - 2009, and the other 2009-11. Is there any difference? which one should i buy?

ASH8 05-08-2012 04:25 AM


Originally Posted by eoph (Post 4258065)
So the fog light lense on the right side is cracked open from a rock, and i was looking at mazda-parts.com for a replacement. But I've noticed they have 2 options for it, being the same price for 290.xx, with one having the description LAMP(R)-F.FOG - 2009, and the other 2009-11. Is there any difference? which one should i buy?

FF14-51-680A Right Side Fog Light Assembly (only way to get the glass)
FF14-51-690A Left Side

amdhunter 05-28-2012 01:04 AM

Part number for 2009 R3 Back Seat Trunk access door.
I need one to Dremel through. :)

JM1FE172090403062

ASH8 05-28-2012 04:20 AM


Originally Posted by amdhunter (Post 4273186)
Part number for 2009 R3 Back Seat Trunk access door.
I need one to Dremel through. :)

JM1FE172090403062

They are not cheap...

Only available (from Mazda) as a complete assembly, this is the Lid which includes the storage pocket (box) behind the Lid.

F151-64-50XA-02 Lid Box Storage. ($118.00 USD)

amdhunter 05-28-2012 02:13 PM


Originally Posted by ASH8 (Post 4273216)
They are not cheap...

Only available (from Mazda) as a complete assembly, this is the Lid which includes the storage pocket (box) behind the Lid.

F151-64-50XA-02 Lid Box Storage. ($118.00 USD)

Darn! I have to get creative I guess.

Marvel 06-17-2012 11:48 PM

2006 rx8 mt. (vin number redacted). I'm looking for the plastic piece inside the driver's side door that the exterior door handle uses as a pivot to open the door when the handle is pulled. That's the best way I can think to describe it. I think there is a spring attached to this piece somehow but I'm not sure since mine broke and the spring fell off. Here is a picture of the broken piece:

http://i.imgur.com/wuwtN.jpg


Here is another angle. The broken piece is on the right. You can see a part of it dangling off. The metal thing on the left is the lock cylinder:

http://i.imgur.com/YFcSY.jpg


Thanks! I'm also wondering about the part number of the white plastic circular clips used to hold the door panel on. I broke a couple of those getting into the door to snap those pictures.

ASH8 06-18-2012 04:42 AM

First..FULL MARKS M8 for supplying your full VIN #..it helps me so much... :)
And of absolutely no use to anyone else.

Your Door Trim Clips # GJ6A-68-AB1 $0.90 cents each.

Now the pics, again, thanks.....

ANYTHING to do with the outer Door Handle is part of the Door Handle.
Your Galaxy Gray Handle for Left Side is # GJ6A-59-410N-91
It has been slightly modified and improved, new for $50.00

aprtur 07-22-2012 05:10 PM


Originally Posted by ASH8 (Post 4182356)
Supply a VIN and I can confirm exact Part Numbers..

Used up to June 1st 2009..
F1Y7-50-03XAAA Front Bumper (Primed NOT Painted).

*snip*

Is there a part number somewhere for a pre-painted bumper, like japanparts has here? I see that V4-919 seems to include everything I'd need for the R3 style bumper....however, that's much, much shorter of a number than any part number. Thanks ASH8!

ASH8 07-22-2012 06:30 PM

Nope...that is something offered in Japan only...

In this case Distributors (outside of Japan) do not import these 'assemblies' or kits, mainly because of the numbers (quantities) involved..the Japan Parts one converts to $915+ shipping ($1000+ at a guess (cubic size)).

The 'V4' Part Number says this is a factory "Accessory Kit" (also in the RX-8 Accessory PDF), for Japan Only for reasons stated above.

Be careful about JP, they are a good company, but many of their web prices are also old ones.

F1Y7-50-03XBBB Front Bar Cover 'Primed ONLY' R3 (no headlight washers).
F1Y9-50-03XBBB Front Bar Cover 'Primed ONLY' not R3 (NHW)

Plus, now the car (RX-8) is out of production these Kits will not be re-stocked, so once sold out, you then go to separate individual OE parts.

aprtur 07-22-2012 08:52 PM


Originally Posted by ASH8 (Post 4312467)
Nope...that is something offered in Japan only...

In this case Distributors (outside of Japan) do not import these 'assemblies' or kits, mainly because of the numbers (quantities) involved..the Japan Parts one converts to $915+ shipping ($1000+ at a guess (cubic size)).

The 'V4' Part Number says this is a factory "Accessory Kit" (also in the RX-8 Accessory PDF), for Japan Only for reasons stated above.

Be careful about JP, they are a good company, but many of their web prices are also old ones.

F1Y7-50-03XBBB Front Bar Cover 'Primed ONLY' R3 (no headlight washers).
F1Y9-50-03XBBB Front Bar Cover 'Primed ONLY' not R3 (NHW)

Plus, now the car (RX-8) is out of production these Kits will not be re-stocked, so once sold out, you then go to separate individual OE parts.





I had a feeling that would be the case....sounds like I'll need to jump on buying a pre-painted one, if I really want to get it that way. Thank you for your help, though, ASH.

*edit* I did find these part no's in an online EPC system and the accessory catalog, however....how do they show up for you?

F1Y7-50-03XB16
F1Y7-50-03XA16


All times are GMT -5. The time now is 03:24 AM.


© 2019 MH Sub I, LLC dba Internet Brands