RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series II Aftermarket Performance Modifications (https://www.rx8club.com/series-ii-aftermarket-performance-modifications-162/)
-   -   turbo xs '09 (https://www.rx8club.com/series-ii-aftermarket-performance-modifications-162/turbo-xs-09-a-189607/)

RX8pwnage 01-19-2010 04:13 PM

turbo xs '09
 
turbo xs informed me their exhaust fits all models of rx8, including the 09s. I was under the impression the 09+ was different somehow, and that 04-08 catbacks woudnt fit properly. Anyone got any input?

EMart11b 01-19-2010 05:12 PM

Exhaust manifold and midpipe are the same. Our catbacks are different, I believe they sit lower and the tips are bigger and in a slightly different spot.

Not 100% on the actual differences I just know that the catback is different.

SayNoToPistons 01-19-2010 09:28 PM

I believe the clearance for the catback is different with the series II RX8s compared to the series I.

michaelsk8er 01-20-2010 07:43 AM

I know the CAT is different as it states so in the Service Highlights, along with the emission system itself. I believe the catback is mounted higher up and the tops are slightly higher and further apart.

Racing Beat and several others have different exhausts listed for each model.

RX8pwnage 01-20-2010 08:11 AM

^+1 seems everyone agrees the series 2 catback mounts in a different placement. Wonder how turbo xs catback fitsboth models? :dunno:

michaelsk8er 01-20-2010 02:03 PM


Originally Posted by RX8pwnage (Post 3395234)
Wonder how turbo xs catback fitsboth models? :dunno:

Probably like crap or not at all :-).

lzhmax 02-04-2010 09:19 AM

I'm sure that s1 catback wont fit on s2.
The mounting position is different.

discomonkey 04-01-2010 07:00 AM


Originally Posted by lzhmax (Post 3416137)
I'm sure that s1 catback wont fit on s2.
The mounting position is different.

i installed it on my 09 R3 the only thing is that its loud as shit and....it melted my shrouds....

OSSHWA 04-02-2010 01:23 AM

At the moment, isn't it pretty much only Racing Beat that offers an '09+ specific cat-back?

Mysticalsnake 04-20-2010 04:13 AM

i used the Exoticspeed R1-T cat-back on my 09 rx-8 and just trimmed the shrouds a tad so the tips didn't touch. Other than that it fits fine.

My neighbors do hate my car with the Rotary Performance race mid-pipe coupled with the R1-T cat-back though...

rx7guy27 04-20-2010 05:08 AM

I put the turbo-xs with race pipe on my 2010 R3 fits fine, had to get some different hangers so that the pipes would sit lower from the shrouds.....Its a little loud but I think some of you are over doing it.....I had a racing beat header with a hi-flow cat and similar style exhaust set up on my 2nd gen and it was 3 times louder then my 8 which has no cat.....if its droning inside I suggest you spray the bottom with some rubberized undercoating which you can get at any autozone for a few bucks.....I drive it and can still here my stereo without having to blast it, so I dont know what you are all talking about......


All times are GMT -5. The time now is 02:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands