I'm never gonna answer a question for you. You don't even try to give me the necessary info.

 

I apologize,

Wheel Diameter (F/R):
18"/18"

Wheel Width (F/R):
9.5"/9.5"

Wheel Offset (F/R):
They are listed as +12/+20, but obviously can be switched around if needed.

Suspensions Changes:
Stock

They currently have 225/40/18, but that isn't nearly enough tire. I was thinking 255/40/18

 

Not gonna work at all.

 

After searching through the thread I think i just about got my answer fitment wise.
I'm going to be running 18X8.5 +30 on stock shocks with s-techs and I was wondering
if i would have any issues running stock 225/45 tires. Newb to the wheel business haha

 

No but you should run 245/40 instead

 

Planning on it once I've killed these tires, thanks

 

Looking at:

F: 18x8.5+30
R: 18x9.5+35

And trying to figure out tire sizes..

I've been searching for an answer without having to ask, but I might as well be on the safe side before I spend $2k

I was thinking,
F: 245/40
R: 265/35

Any fitment issues or rolling needed?

-Dropped on S-Techs

Better suggestions are more than welcome.

 

Do the 9.5 +35 with 265s front and rear. May need a fender roll

 

Alright thank you!

I know I've seen 9.5+35 with 275/35 and they had slight rubbing in the rear, we'll see how close I get.
(Same springs/rims on said car)

 

Work CR-Kai Kiwami
18x9.5 +38 F+R
245/40 F+R
K-Sport Coilovers 1.5" Drop

Work CR-Kai Kiwami
18x9.5 +38 F+R
245/40 F+R
K-Sport Coilovers 2" Drop

 

10mm spacers remove rear bumper tab and roll fenders. I had the same setup

 

XXR 530

18x8.75 +35mm (F + R)

I want to know which tire to put on the four corners without rubbing.

I have stock coil spring but I planned to drop it of 1".

thanks

 

245/40

 

Will it look a little bit agressive ? And will I need to roll my fender ?

thanks

 

Better than stock. No rolling needed

 

Why not 255/40 ?

 

Rays RE30 Hyper Bronze
F/R: 18x9.5J+28 (17.7lbs)

Tire Options:
F/R: 265/35R18 Advan AD07 (26.2lb)
F/R: 245/35R18 Triangle TR968's (24lb)
F/R: 235/40R18 Federal 595's(26.5lb)

Stance GR+ Coilovers

Looking to have the tire tops even with the fenders, nothing too dramatic. Thinking the 9.5J+28 fronts might have been a bit too much for the AD07's as the tire profile is super square at almost 11"... Rolling fenders im ok with, I've done it to all 3 of my FD's, but I'm not looking to push the camber more than F:~-2.0 deg R:~-1.5 deg(my reading shows max stock camber adj. of around -1.7?)I leave the rest to the experts...

 

been looking at varrstoen 2.2.1 at

[18x9.5+30] OR [18x9.5+22] WILL IT FIT?

I have oem suspension but may get springs in the future.

May get 245's or 255's, which do you guys suggest?

 

Not good if you lower the car

 

Those are very wide tires. Would require a pull and remove the rear bumper tab. You would also have to be lowered atleast 2 inches all around.

 

Lower the car first or those will look stupid

 

Drop: Front 1.75, Rear 1.5
Rim Diameter and Width: 17x9
Tire Size: 215/45/r17
Offset: +15
Basic Fender Roll and Stock Camber
Will it fit???

 

Probably. Will it look stupid? Definitely

 

lol, im tesst fittin it only, but i just wanted an opinion, i got two sets im looking to buy
18x8 +40 or 17x9 +15 or +20 i forgot what he said, gonna test both and see, but yeah
just wanted to get an opinion, thanks

 

I want some work XD9's will 18x10 + 38 all around fit on stance gr+ coilovers?