Shop says: too low for alignment
the local place i went to told me that i needed to remove my rear bumper and exhaust (rr single)
i think im around 26" from the ground to the top of the fender. he wanted $170 to do the alignment and take off the bumper and exhaust. Normally he charges $75 should i look around for a place that can do it without that mess? I already took my exhaust off in an attempt to cut down the price |
Why would they need to take all that off? They never have had to remove anything to do mine.
|
Originally Posted by 9krpmrx8
(Post 4413258)
Why would they need to take all that off? They never have had to remove anything to do mine.
when he attached it, he pointed that the laser would hit the rear aero flare/exhaust shroud. He told me that other shops may have an alignment laser with longer/adjustable arms to accomodate for lowered cars but he doesnt have that. |
Oh well the place I go has adjustable ones. But I'm also not hellasunk either.
|
Originally Posted by 9krpmrx8
(Post 4413271)
Oh well the place I go has adjustable ones. But I'm also not hellasunk either.
https://lh6.googleusercontent.com/-i...2/IMAG1608.jpg your suggestion is to call around? |
Yes call around, and your not flush because you are on coilovers and much lower than I was when I had stock wheels and spacers.
|
^+1 iknow, im just messin with you 9k.
thanks. Im going to call around now. |
I don't know how far you are from Aberdeen, but there is a shop on route 35 that has the alignment rack installed flush to the floor so getting onto the machine is no problem. I usually go there for alignments and they do a great job. The shop is called Advanced tire and auto center, inc. Here's a link to their website: Advanced Tire & Auto Center | Aberdeen, NJ | Serving friends and neighbors for the past 16 years!
|
i had this issue lowering mine, the usual gauges wont fit over the top of the tire. you will need some one with 4 wheel laser alignment, i think the machine is called 'hunter' over here, not sure if its the same in the U.S
|
Originally Posted by HockeyRX-8
(Post 4413291)
I don't know how far you are from Aberdeen, but there is a shop on route 35 that has the alignment rack installed flush to the floor so getting onto the machine is no problem. I usually go there for alignments and they do a great job. The shop is called Advanced tire and auto center, inc. Here's a link to their website: Advanced Tire & Auto Center | Aberdeen, NJ | Serving friends and neighbors for the past 16 years!
they are about 40min away from me according to google maps. Know of any shops closer to NE NJ? Essex county? |
The last time I got my car aligned there, it cost $75. And I don't know of any shops near Essex...sorry.
|
|
^ i should have checked this thread...
I called up bulldog motorsport in clifton (15min away from me) and they quoted me $175 |
Originally Posted by SayNoToPistons
(Post 4413945)
|
That shop is complete crap. Find a place that has one built into the ground so there is no ramp to drive up on. You shouldn't have to pay more than $65 for it.
|
I get mine done at tireman. the one tech is the only one who would touch my car with the 360 forged rims on. they have rubber alignment pieces for the rims. also they have a drive on flush with the floor rack. It was 125 for 3 years all the alignments I want and to my specs. with out the 3 year was 75 for 4 wheel
|
Make friends with someone who works at a dealership.
|
My car is quite low....but removing the bumper won't help the problem anyway...it is more of a problem getting it over the air-jack setup on most alignment racks...or getting it up on the rack in the first place
You need to find a place with some accessory ramps and a few brains.....and you will be OK At 26" there should be lots of room |
ask around for where the local competitors get theirs done, your SCCA region etc.
26" to fender lip is high for STX, just fyi |
All times are GMT -5. The time now is 02:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands