I think 19's is a bit big for the rx8, but to each their own.

specs?

18x9 +32 all around.

looks good!

BBS LM's 18" (reversed mounted faces)
18 x 8 +35
18 x 9 +35

Attachment 224683

Attachment 224684

The 360 Forged wheels are amazing looking bits of kit!

Looking to get some new rims for my 8, what are some suggestions or places to look? I'm relatively new to all this so I'm not really sure

^ Try TireRack.com

This is my 04' GT with XXR 530 18x8.75 +25 (F) and 18x9.75 +25 (R) on BFG KDW2 225/45R18 and 245/40R18 rear on Tein Basis coilovers

Alright I need some help guys lol. I just got a set of Enkei Raijins from a friend for my 8. How does the fitment look?

The specs are 18x8.5 +50 all around. I'm a total fitment newb so tips would help regarding a decent looking fitment haha. Thanks

Attachment 288304
Attachment 288305
Attachment 288306

(Sorry for the picture quality :/ )

If you were looing to go flush, I would look into maybe a 20mm spacer or so, since you have similar wheel specs to the factory ones, maybe check out the sticky on "going flush with factory wheels" if you havent already. Other than that, I like it. I see you have the Tein sticker, so if you have coilovers, maybe go down with it just a touch? That's just my opinion though, do what fits you and your area. I have pretty bad scraping problems if I'm not careful around here

http://www.flickr.com/photos/9krpmrx8/11166978865/

^ I officially started saving money for SF Challenges or GTS's yesterday thanks to your car.

I love it.

you should find a set of these:

http://www.d3wheels.com/Volk%20Racin...%20Phantom.jpg

^very sexy but I have decided to save up for some advans...I know I'll get bored of the RPF1s by the time I get enough money for them
http://www.evasivemotorsports.com/mm...n_tciii_dg.jpg

Thanks guys. I love the TCII's. I like the RG-D's as well but the GT is just so classic.

http://advan.tbone.com.au/media/Advan_GT.17050.png

^
the GTR face (concave) TCII is a winner.

XXR 527 best pic I got at the moment... Car is lower now, but cant get a new pic till winter is over and the car cover is off.

I've never seen that wheel before Scott. VERY NICE!


My Rpf1s
https://scontent-a-dfw.xx.fbcdn.net/...98748759_n.jpg

After thumbing through all 48 pages I have decided that I am probably going to get some Enkei RC-T4's. I seen a lot of similar wheels in this thread.

Still need a drop but 18x8 +30 and 18x9.5 +35

Should have done the rear size all around imo

My old weds 18x9.5 +15 18x10.5+12

And my new lxz's same specs.

Evo X MR BBS
18x8.5 +38
245/40/18
Mazdaspeed suspension

Sorry for the bad picture, I'll take a better one with a real camera soon.



Attachment 200860