New Chrome wheels!
 

Just put on some 18 x 8 chrome Avenue wheels. I went for these because they have a little of the fat and skinny spoke look (classy) with the bolt on pattern between them (sports/race look). Any feedback would be appreciated.

looks very nice....

Hey, just checked out your site (jenkins-crew) - what are the radio buttons for?

neons, strobes, and stuff like that. Turning it into a show car.

pretty nice

i need to roll i think...
im getting 19 x 8.5 fronts with 38 offset
9.5 rears with 42 offset.
i think 245s and 275s will be my tire sizes(what is best 30 or 35s?)
do i need the rolling tool? looking for tips.
thanks

Maybe yes maybe no, what drop do you have?
(Mine is the H&R and is very low with a 275 tire)
Rolled a week ago and still small rub, the plastic part by the rear bumper.
Cut of a small piece and all is well now.
A fellow member is coming by today to roll his fenders.
Will try to take some pictures....

Axis Crux - 19x8 (+42) on all four corners wrapped in Falken Azenis ST-115s, 235/35/19

would like to hear results...and see picts.
thanks
andy

Fellow member rolling worked out great!
Fun in the sun, beer and wine, yeah...
Dude in picture will help me install Revi, Exhaust, and sway bars soon....
(More beer & wine,)

I do not think you will have to roll your fenders. I have 19x8.5 w/38 offset and 19x10 w/44 offset, wrapped with Nitto Nt555's Extreme ZR 245/35/19 front and 275/30/19 rear and no rolled fenders here.
I have the Tein S-Tech springs as well, all with no issues!!!!
I will try to post some pic's in a little bit........

Maybe not with the Teins but you will/would with the H&R!

finally some pic's
 

Here are some pic's I took right after I put them on!!!!

You are right on that one. Those springs drop the car more than mine.
But that LOOKS pretty damn nice. Kudo's to you Modena.

i feel the need to drink now...

thenks, looks great. i did not know that the "rolling tool" was such an elaborate device.
anyone buy one or know what they go for? and/or...how much to roll them at the beer wine shop?

thanks for the info!
btw, your car looks low and mean with that set up!
it almost looks like the tires themseves have made the fenders bulge out of pure need.

nice rubber.

Here is another shot.

Thanks a lot for the compliment....

thats tight.!! are those 18s or 19s and what offset? and whats the drop on the H&Rs?

Volk Racing GT-C gun metal in 19 8.5 F and 19 9.5 R with Nitto NT555 the tire size's are 245-35-19 F and 275-30-19 R.
(No clue about the offset)
Drop with the H&R is about 1.5 inches (if not more) front and back....

are you still running factory shocks or?

Yes, OEM shocks did cut the rubber thingy in half when I got the springs of...
(Bump stop if that’s the word?)

yep, that's the right word. it floors me that nobody has come up with a "dropped shock" for our cars (except for coilovers, but who wants to spend over a grand when all they need is a shorter shock?) Whoever is the first ones to bring that to market correctly will probably make a fortune. Maybe there are advantages/disadvantages to having springs/shocks as opposed to a full blown coilover setup, but I'm no expert on that so I won't even try to go there. Those wheels/stance on your look awesome, can't wait to do some work on my car in that area, should have a drop by June, wheels are going to take longer though (big sigh)

your car is real clean man! Good job!

Pirelli PZero M&S on Enkei MM2 18X7.5 wheels.

ADR M Sports

Those look good on the blue

Mine done recently...

good looking not meant to be big... otherwise it will bust my bank
I just want to empty my stock rims which are now ready for some semi slick (R tyre) for the trackdays

http://www.step-hen.com/rx8/CRW_0781_RJ.jpg

20" rims
 

Hey guys, I know I've been a member for a long time, but I've been on here before i bought my RX8. Well I finally got one and I can't be happier. I bought it in Feb. Its a 2005, and I started on some serious mods... Lemme know what you think....

Bling Bling, not bad man!

Consolidating from another thread: SSR GT2 18x8
https://www.rx8club.com/attachment.p...chmentid=51713

I have a similar setup for bodykit as you.. Ings Wing and all.. :P

Are those enkei RP03s. What size are they. Those are the rims i want but in 19s.

GOT ANYMORE PICS.

rp03 18x8 +40

the links https://www.rx8club.com/australia-new-zealand-forum-37/meet-enkei-boys-62155/

ILIV48 there have the 19" :cool:

Coming soon, Volk GTV or TE37 in Dimond black!!!!

18X9 Mistros
 

These where the first upgrads to the car. :cool:

My lightning
 

TSW thruxtons 19 x 8 front 19 x 9.5 rear, :D :D

Lets keep getting more rims in here. I like the RX-8 with the Work Wheels on it. Lets get that one in here.

cant believe no one put the dark chromes in here....i know it says aftermarket but i still think they deserve a pic!

http://memimage.cardomain.net/member...12_74_full.jpg

Finally took some pics of the Speed Star D5R's. I have been very pleased with them :) The color match is perfect with the Ti Grey.

They are 18X8 front 18X9.5 rear with Falken Azenis RT615's (245/275) :)

tri-spokes.... anyone (me thinking about it :D )

http://www.ezzy-style.com.au/esm8oragne1.JPG

old school meets new school..........could turn out pretty nicely if u ask me.

It would be interesting to see.

Husker, that's a great looking "8" with the MS kit and the wheels set it off perfectly and I don't even like strakes but on your car they look GOOD. Nice job!!

Try these

18x18.5 MKW's

SSR Competitions 18x85 on falkens 245/40 offset is 42.

i'm taking the trophy here! j/k
SF Challenge 19x8.5 front 9.5 rear 42 front 40 rear toyo tease one ass tire 245/35/19 front 275/30/19 rear. rotor slotted disc. bloody red caliper.

PIAA Super RoZZa's 19-8, 19-9.5

Nice PIAA Super RoZZa! Those are hot and expensive $$$!