Great!!! looks really nice... what's the size and offset? what tyre and size? Thanks.
|
|
paint your calipers!^
|
Originally Posted by Mazdaspeed 88
(Post 2104878)
Great!!! looks really nice... what's the size and offset? what tyre and size? Thanks.
|
considering new Wheels
2 Attachment(s)
I was considering getting some new 5Zigen USA Pro racer ZR+520 Wheels 18 x 8.5 J, 5h-114.3 deep face Two and +47 offset anybody have any experience with these wheels and this offset? I believe the stock 18" wheel offset is 50? My tires are stock Dunlop Sp Sport 225 45R 18" 91W
These Wheels look good on other similar vehicles and are similar to Works Emotion CR, but spokes come out to rim edge making the wheel look biger. PS this wheel is not a TPMS wheels so light will stay on. Anyone else have experience with this situation? My nieghbor does this with aftermaket wheels on his for winter tires with no problem except anoying tire presure light when wheels are changed over and switches back for summer and resets monitor. |
i dont like how the spokes go out to the lip^ otherwise its nice though
|
|
You have too many colors imo^ Chrome, silver, red, black, yellow fogs, and rust rotors;) It would look nicer if you lose the chrome fuel cap, paint your rear rotors red, and take the yellow fogs off. I think I posted this before though. The red on the wheels is delicious though:)
|
lovin the body kit, wingless look. The AME look pretty sick as well.
Originally Posted by Endless Rotaries
(Post 1197704)
My Winning Blue RX8
AME Circlar Spec R: Forged Barrel Two Piece wheel from Japan 19x9.0 245/35/19 19x10.0 275/30/19 Color: BBF Finish, kinda like RMC or WMC or SBC, lolz. Zeal Function X 30 way Adustable Coilovers, lowered about 2". http://www.autornd.com/catalog/album...n_DSC00032.JPG |
Volk Racing TE-37 19x8.5 +27 , 19x9.5 +33
http://i227.photobucket.com/albums/d...ang/asdasd.jpg i will post when i install kit |
^^ man those 19s looks real nice ocra great job. any rubbing problems with those offsets? Plenty of rubber back there!! :Eyecrazy:
|
Gunmetal Works Emotion Cr Kais with Bridgestone Potenza RE960s.
Front: 18x8.5 38mm Tires: 245/40ZR-18 Rear: 18x9.5 38mm Tires: 275/35ZR-18 http://mysite.verizon.net/vze3wqzd/s...ures/rx814.jpg http://mysite.verizon.net/vze3wqzd/s...ures/rx815.jpg http://mysite.verizon.net/vze3wqzd/s...ures/rx813.jpg |
Lower that puppy just a little bit and get some clears.........other than that, looks nice!
Oh......BTW........somebody wrote on your car! :Eyecrazy: :lol2: |
looks nice!
|
Originally Posted by yoshistoned
(Post 2125716)
^^ man those 19s looks real nice ocra great job. any rubbing problems with those offsets? Plenty of rubber back there!! :Eyecrazy:
|
doh that sucks with the rubbing man but i guess if you can live with it everything is good. your wheels like good man i should have went with 19s...
thanks for the comments Mazurfer... cant wait to delve into the which lowering springs to get confusion now...! =\ j/k |
^you need some center caps on your wheels in a bad way, that rust showing through on the hub ruins it.
|
1 Attachment(s)
Rear side
|
Originally Posted by L8APEX
(Post 2131380)
^you need some center caps on your wheels in a bad way, that rust showing through on the hub ruins it.
|
The works don't come with caps. Atleast I haven't been able to find them for a set I was going to buy.
|
Enkei NT03+M 17X9.5
http://img.photobucket.com/albums/v5...8/IMG_1494.jpg http://img.photobucket.com/albums/v5...8/IMG_1499.jpg http://img.photobucket.com/albums/v5...8/IMG_1497.jpg it's just spray painted with flat black and clear coated, I'll have it powdercoated when it's time for me to get a new set of tires (Nitto NT01's 274/40R17). I also removed the centercaps so I can get them anodized (black) |
Originally Posted by d j
(Post 2132525)
Enkei NT03+M 17X9.5
http://img.photobucket.com/albums/v5...8/IMG_1494.jpg http://img.photobucket.com/albums/v5...8/IMG_1499.jpg http://img.photobucket.com/albums/v5...8/IMG_1497.jpg it's just spray painted with flat black and clear coated, I'll have it powdercoated when it's time for me to get a new set of tires (Nitto NT01's 274/40R17). I also removed the centercaps so I can get them anodized (black) ^---------- :icon_no2: |
d_j,
Why is that gap in your hood so huge near the windshield? Are those the Tein dampers you have in there? If Teins, I have them as well and my gaps is about 1/4 of what yours appears to be. Sorry, but that looks messed up! :Eyecrazy: |
Originally Posted by Mazurfer
(Post 2132673)
d_j,
Why is that gap in your hood so huge near the windshield? Are those the Tein dampers you have in there? If Teins, I have them as well and my gaps is about 1/4 of what yours appears to be. Sorry, but that looks messed up! :Eyecrazy: aka: hood rise spacers, I've had it my FC and my AE86 and decided to do the same with the 8. |
Originally Posted by moete87
(Post 2132559)
^---------- :icon_no2:
|
Originally Posted by d j
(Post 2132701)
I have spacers on my hood to create a gap between the firewall and the hood...
aka: hood rise spacers, I've had it my FC and my AE86 and decided to do the same with the 8. I know that some have been doing it to let some hot air out of the engine bay. Spacers are located between the hood and the brackets for the dampers? Remember how thick they are? Thanks..........Dave |
Originally Posted by Mazurfer
(Post 2132743)
Okay....got it, that was what I was hoping you would say!
I know that some have been doing it to let some hot air out of the engine bay. Spacers are located between the hood and the brackets for the dampers? Remember how thick they are? Thanks..........Dave |
Not too bad DJ, did you get them powder coated? or just paint them?
|
Originally Posted by 8rotor8
(Post 2132782)
Not too bad DJ, did you get them powder coated? or just paint them?
|
not many white 8's.... i wanna see more white eights!
|
how bout some green 8's..hahah
|
|
oh wait, i posted in this thread a while back :banghead:
|
Originally Posted by Hattori
(Post 2133441)
not many white 8's.... i wanna see more white eights!
here you go..... this is the pic before drop... i will post some dropped pic lata on.... |
Originally Posted by Sidus
(Post 2134471)
here you go.....
this is the pic before drop... i will post some dropped pic lata on.... |
word that white 8 is nice
|
100th POST
http://i7.photobucket.com/albums/y25...d6/Pics051.jpg http://i7.photobucket.com/albums/y25...d6/Pics065.jpg edit: i fixed the fender strakes |
does it count while my car is in restoration phase?? :Eyecrazy: I promise it is supposed to be a green eight, but i guess i get credit for green, black, red, and puke yellow?
http://i147.photobucket.com/albums/r...Picture006.jpg http://i147.photobucket.com/albums/r...Install021.jpg |
Just wondering if i would be able to fit 20's in there or is 19 the biggest without having to mod anything else?
|
Originally Posted by rrockrc
(Post 2145712)
Just wondering if i would be able to fit 20's in there or is 19 the biggest without having to mod anything else?
|
I got 20's.....all I did was get coilovers, had them for 2 years now. No issues here...
|
Works Emotion Cr Kais +clears, strakes & tint-
http://mysite.verizon.net/vze3wqzd/s...ures/rx820.jpg |
now drop it like its hot
|
Originally Posted by ocrapitzleon
(Post 2154902)
now drop it like its hot
Originally Posted by yoshistoned
(Post 2144850)
...
...considering the Eibach springs for the progressive feature, seems pretty cool. Used a measuring tape earlier today and it looked as if a 1.4” drop in the front is definitely going to rub, even if we shaved the fenders, at least from what it looked like just by looking at it in front of us. The tires seems too damn wide so it looks as if I might have fucked up by not researching enough before choosing the tire sizes :banghead: The setup: 18x8.5 38mm w/ 245/40ZR-18 (front) 18x9.5 38mm w/ 275/35ZR-18 (rear) The tech dude who assisted me in the measurement said swapping out the tires will help. Specifically moving the 245/40ZR-18s to the front and swapping out the 275/35ZR-18 in the back for 225/30ZR-18 in the front. It really did look like this is the solution according to the tape and what we were looking at in front of us. I really don’t want to swap out the tires I have had them almost 2 months so it will be a challenge doing this. I would like to avoid this route…if possible. Will someone please kindly share their experience if they are running a similar set up? Someone please chime in something! As you can see from the sig the ride is in need a drop...! Again this just doesn’t sound right. Can anyone puhliz confirm my dude is WRONG?!?! I hope :lol2: |
Going to need a roll I bet. I am +28mm on 19 by 9.5 and I needed a fender roll.
|
staggerd 19'' axis shine
1 Attachment(s)
for sale
|
2 Attachment(s)
Just put on today 19" chrome AV3's!!! :D:
|
I dig the rims.....now paint the calipers
|
calipers(red) are being done Monday ;)
|
All times are GMT -5. The time now is 03:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands