Is it offset +22 good for rx8?
offset +22 good for rx8
Let me know Thanks |
No - too low; you'll have to do some serious rolling and stretching of the fenders...
|
Depends on how much fender modification you can deal with.
|
ohh.....I guess I have to go more than 35mm....
Thanks Guys~ |
I have +28 and I had to roll on a 9.5 Inch Wheel.
|
i currently have 17x10s in the rear with 35 offset with 255/40r17 and i have no rubbing issue at all. it all depends on the size of the wheel. you cant just give us the offset.
|
Considering that the OE offset is something like 45mm...
I'm running 42mm in the back and 37mm up front. Just barely clears. |
I thought the offset on stock was 50mm.
|
I don't think its that high. I think the '6 is in that range, though.
|
im running a 30 in the rear 9.5 rim with a 275 tire with fender trimming, no rub at all. But without the fender trim it will rub like crazy
|
the offset is 50.
beers :beer: |
depends on the width of the rim and is this for the front/rear.
post more detailed info on the rim if you want a correct answer. also... got one sticky thread just for this... no need another thread. |
I think im running one of the widest rims and offset on this forum.
19 x 10 with a 25MM offset 275 tire in the rear. I had to CNC machine the hubs of my rotors / roll and stretch the fender and cnc the rear hub of the wheel to get them to fit. I do not rub very often, but on the occasional time i do. |
Originally Posted by BigOLundh
(Post 2270546)
depends on the width of the rim and is this for the front/rear.
post more detailed info on the rim if you want a correct answer. also... got one sticky thread just for this... no need another thread. How about 18 X 8 18 X 8.5 18X9 18X10 How about these width?? What is the good offset for these width??? 30-40mm is good right?? |
Just stick with a +35 and up offset and you'll be fine.
|
Originally Posted by bandalgom78
(Post 2279007)
Ok...
How about 18 X 8 18 X 8.5 18X9 18X10 How about these width?? What is the good offset for these width??? 30-40mm is good right?? CHEEEEEEEEEEEEEEEEEEE!!!!! |
|
how bout
rear- 18x9.5 with either a +25 or +38 offset front - 18x8.5 with either a +30 or +48 offset which ones would work best on my 06 rx8? i reall dont wanna do no cuttin or rollin or nothin! car is not lowered! |
When my spacers come in I'll be right around +23 on a 18x10. I could buy the same wheel in a +15, but I think even with some super low pros and some serious stretch, it wouldn't work.
|
nice 2 year bump
|
Post in the "will it fit" thread...
|
Originally Posted by tiltmode43
(Post 3462048)
Post in the "will it fit for ret@rds" thread...
|
I want to run this set up 255/35/18 offset et30. I am on 2 inch lowering springs. Can I do it?
|
All times are GMT -5. The time now is 05:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands