not bad looking at all, that drawing/photoshop rx7 is SICK!!!

Congrats man! Rishie you really are the best/one of the best vendors on the boards and to hear that you've been maintaining this level of support with a new born in the house is mindblowing!




On a more serious note, any word on 17's? Looks like the inner diameter on the barrel is a bit better than the RPF1's on the 18" but it's hard to tell without throwing them on the car. I've been poking around looking for another set of wheels for AutoX to replace the RPF1's due to the low clearance on the 17's over the stock calipers and to be able to maintain a similar look and weight without gouging my wallet is pretty damned tempting...

tempting

ALL PM'S REPLIED.

Anijo,

Your words of kindness are a great gift to me. It's tough, real tough, i'm working in tidbits throughout the day. The country's economic status isn't allowing me to get a full time nanny so I gotta wear quite a few hats these days.

SADLY NO 17" FOR FORGESTAR. Your other options would be quite expensive or non existing in a RX8 friendly offset.

Oh what tire size are you running on the 17's?

18" opens up a whole slew of options though.

Rishie

Sent you a PM. Take your time, I'll wait til the baby is asleep. ;) Congrats!

18x10.5+25? lol

Sorry no 10.5".

Just goes

10"
11"
12"

245/45/17 was slightly stretched, so next year I'm probably going to run 255/40/17, which is the max width my SCCA class allows for anyway. A few people have brought up the idea of keeping a set of both 18x9 and 17x9's around and swapping based on what feels best, perhaps keeping a different set of tires on each if you deal with a few different surfaces.

Unfortunately (or fortunately for my wallet? :lol:) I'm not at the level where I can discern these differences yet, so that's a bit far out for me still. What I AM interested in is finding a set with more caliper clearance. I like the tire pricing on the 17's a lot more but I definitely like the look of these. I'll definitely keep them in mind if I decide on switching back to 18's :)

sounds good, let me know when you're ready.

Rishie

holiday bump.

Rishie

they look great.

Is the Titanium Silver the regular silver or is that an extra $$$ color?

My friend has these on his G35, with a really deep concave they look incredible, Definately a classy and aggressive wheel,,, Looks a million time better in person also,,,

These look pretty damn sexy. I like.

sexy as f**k

this are going to look SICK on the 8 :drool:

rishie,

Is Forgestar's flow formed process similar to how Rays does it?

im really blown about not having 17s though.

The flow form process is similar to Enkei MAT process.

It is a flow formed barrel but begins as a cast piece of metal.

I'm not sure but the ray's monoblock stuff probably starts out as a press forged piece of alloy and then the barrel is flow formed. Hence the vast price difference between these wheels and the TE37's etc...

Rishie

That sounds similar to how Rays does it. My G-Games 99b are flow formed and are light and strong due to the process. BTW I did a photochop for you on 7club :)

I don't believe the G Games are made the same way as the Ray's monoblock series. They are most likely more like these Forgestars and Enkei MAT.

If all else fails you can always tell by the price and I see cost so it's obvious.

Monoblock = PRESS + SPUN

Most other flow forms when "affordable" refer to CAST + SPUN BARREL.

I can't wait, we should be adding a few more people to the list within this week. Should be all RX8.

Rishie

I just know the 99b's are flow formed and assumed Rays uses the same process for their wheels. That is any wheel they produce that is flow formed. Anyway enough of the thread jack. Looking forward to seeing some members post up their pics :)

has anyone got these wheels yet? if so, can you post pics!

Not on any rx8 that Ive seen.

relax walter, when i get em' you'll see em' at every meet ;)

Any updated on these babies....

They said container lands next week, once that happens I'll be able to get a better idea of ship date after the machining is done. i'm estimating mid to end of Feb.

Rishie

Cant wait to see Atila's pics :)

Thanx angeljoel - i'll be sure to see if i can have a lady friend help show em' off when i get em' :D:

woot. :)

Anyone do a chop with an 8 yet? I did an rx7 for Rishie on rx7club but he never said anything so it must suck :lol2:

Yes they are going to be sick :uhh:

:Peace:

^+1

they're SICKKKKK!! :rock:

'grats bro cant wait to see these...

lol, nah man. That chop was good. Way better than i can do. Shoot i don't even have the software. hahahaha. I've been super busy with my kid lately. Sorry guys.

rishie

February is hereeeeeeeeeeeeeeeeeeee... Cant wait for some pics...

Feb just means the wheels landed and offsets need to get machined. Now the countdown begins. We're still shooting for End of Feb to get these shipped out.

I wouldn't expect photos to appear until Beg to Mid March.

Rishie

:cool:

PERFECT timing actually for Atilla to show them off at the big Dyno Day weekend. There should be tons of guys taking pics.
And we know how much of an attention whore atilla can be... :lol2:

I can't wait to see Atilla's wheels!

I'm interested, it's between these or the new Enkei PF01s
how much again for a set of 18x8.5 +30s ? did I read it right? $1600?

man they look sexy in black :)

*looks at avatar*

I have no idea what you're talking about...

:suspect:

A few more I caught somewhere:

http://www.doubledownmotorsports.com/f14evox.JPG
https://i167.photobucket.com/albums/...s/IMG_0329.jpg
Attachment 266215

CF center caps ftw.

gawd i love these wheels. can't wait to see them atilla!

1600 is retail ur price is much less.

ah don't mess with me!! ha ha. i'll need about a year before i can take you up on these. i just got a 2nd car for daily driving so any extra money i have right now is going to that. once i get my last few payments on my 8 out of the way, i'll be hitting you up! actually, i'm happy w/ my wheels on the 8 right now, but i might want to update the wheels on my dd, or maybe i'll just get one color for each car :mdrmed:

ok fine, 1600 it is. lolz. jk. But i'm sure prices will go up next year. Keep us in mind when you're ready.

Rishie

+1 on a great deal

my keyboard almost caught fire by how fast i was typing back to rishie to say i was down for a set. lol.

your wheels are going to be sick Atilla so so sick!!!!